* Re: [v3,net-next] net: phy: Add Edge-rate driver for Microsemi PHYs.
@ 2016-09-27 21:14 Andrew Lunn
2016-09-28 11:12 ` Raju Lakkaraju
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Lunn @ 2016-09-27 21:14 UTC (permalink / raw)
To: Raju.Lakkaraju; +Cc: netdev
I just realised the possibly correct binding was starring me in the
face.
--------------------------------------------------------------|
| 3.3V 2.5V 1.8V 1.5V |
|-------------------------------------------------------------|
|-2% -3% -5% -6% |
|-------------------------------------------------------------|
|-4% -6% -9% -14% |
|-------------------------------------------------------------|
|-7% -10% -16% -21% |
|-------------------------------------------------------------|
|-10% -14% -23% -29% |
|-------------------------------------------------------------|
|-17% -23% -35% -42% |
|-------------------------------------------------------------|
|-29% -37% -52% -58% |
|-------------------------------------------------------------|
|-53% -63% -76% -77% |
|-------------------------------------------------------------|
So the binding is:
vsc8531,vddmac : The vddmac in mV.
vsc8531,edge-slowdown : % the edge should be slowed down relative to
the fastest possible edge time.
Given those two values, the driver can work out the magic value to put
into the register that nobody knows the true meaning of.
Andrew
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [v3,net-next] net: phy: Add Edge-rate driver for Microsemi PHYs.
2016-09-27 21:14 [v3,net-next] net: phy: Add Edge-rate driver for Microsemi PHYs Andrew Lunn
@ 2016-09-28 11:12 ` Raju Lakkaraju
0 siblings, 0 replies; 2+ messages in thread
From: Raju Lakkaraju @ 2016-09-28 11:12 UTC (permalink / raw)
To: Andrew Lunn; +Cc: netdev
Hi Andrew,
Thank you for review and valuable comments.
I will implement below suggestion and resend for review.
Thanks,
Raju.
On Tue, Sep 27, 2016 at 11:14:36PM +0200, Andrew Lunn wrote:
> EXTERNAL EMAIL
>
>
> I just realised the possibly correct binding was starring me in the
> face.
>
> --------------------------------------------------------------|
> | 3.3V 2.5V 1.8V 1.5V |
> |-------------------------------------------------------------|
> |-2% -3% -5% -6% |
> |-------------------------------------------------------------|
> |-4% -6% -9% -14% |
> |-------------------------------------------------------------|
> |-7% -10% -16% -21% |
> |-------------------------------------------------------------|
> |-10% -14% -23% -29% |
> |-------------------------------------------------------------|
> |-17% -23% -35% -42% |
> |-------------------------------------------------------------|
> |-29% -37% -52% -58% |
> |-------------------------------------------------------------|
> |-53% -63% -76% -77% |
> |-------------------------------------------------------------|
>
> So the binding is:
>
> vsc8531,vddmac : The vddmac in mV.
> vsc8531,edge-slowdown : % the edge should be slowed down relative to
> the fastest possible edge time.
>
> Given those two values, the driver can work out the magic value to put
> into the register that nobody knows the true meaning of.
>
Accepted.
> Andrew
---
Raju.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-28 11:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-27 21:14 [v3,net-next] net: phy: Add Edge-rate driver for Microsemi PHYs Andrew Lunn
2016-09-28 11:12 ` Raju Lakkaraju
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).