From: Stephen Hemminger <stephen@networkplumber.org>
To: David Miller <davem@davemloft.net>,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH net] netvsc: fix checksum on UDP IPV6
Date: Tue, 11 Oct 2016 14:03:07 -0700 [thread overview]
Message-ID: <20161011140307.15fd390b@xeon-e3> (raw)
The software calculation of UDP checksum in Netvsc driver was
only handling IPv4 case. By using skb_checksum_help() instead
all protocols can be handled. Rearrange code to eliminate goto
and look like other drivers.
This is a temporary solution; recent versions of Window Server etc
do support UDP checksum offload, just need to do the appropriate negotiation
with host to validate before using. This will be done in later patch.
Please queue this for -stable as well.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
---
drivers/net/hyperv/netvsc_drv.c | 72 +++++++++++++----------------------------
1 file changed, 22 insertions(+), 50 deletions(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 52eeb2f..9570d21 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -36,6 +36,7 @@
#include <net/arp.h>
#include <net/route.h>
#include <net/sock.h>
+#include <net/udp.h>
#include <net/pkt_sched.h>
#include "hyperv_net.h"
@@ -442,8 +443,6 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
}
net_trans_info = get_net_transport_info(skb, &hdr_offset);
- if (net_trans_info == TRANSPORT_INFO_NOT_IP)
- goto do_send;
/*
* Setup the sendside checksum offload only if this is not a
@@ -478,56 +477,29 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
}
lso_info->lso_v2_transmit.tcp_header_offset = hdr_offset;
lso_info->lso_v2_transmit.mss = skb_shinfo(skb)->gso_size;
- goto do_send;
- }
-
- if ((skb->ip_summed == CHECKSUM_NONE) ||
- (skb->ip_summed == CHECKSUM_UNNECESSARY))
- goto do_send;
-
- rndis_msg_size += NDIS_CSUM_PPI_SIZE;
- ppi = init_ppi_data(rndis_msg, NDIS_CSUM_PPI_SIZE,
- TCPIP_CHKSUM_PKTINFO);
-
- csum_info = (struct ndis_tcp_ip_checksum_info *)((void *)ppi +
- ppi->ppi_offset);
-
- if (net_trans_info & (INFO_IPV4 << 16))
- csum_info->transmit.is_ipv4 = 1;
- else
- csum_info->transmit.is_ipv6 = 1;
-
- if (net_trans_info & INFO_TCP) {
- csum_info->transmit.tcp_checksum = 1;
- csum_info->transmit.tcp_header_offset = hdr_offset;
- } else if (net_trans_info & INFO_UDP) {
- /* UDP checksum offload is not supported on ws2008r2.
- * Furthermore, on ws2012 and ws2012r2, there are some
- * issues with udp checksum offload from Linux guests.
- * (these are host issues).
- * For now compute the checksum here.
- */
- struct udphdr *uh;
- u16 udp_len;
-
- ret = skb_cow_head(skb, 0);
- if (ret)
- goto no_memory;
-
- uh = udp_hdr(skb);
- udp_len = ntohs(uh->len);
- uh->check = 0;
- uh->check = csum_tcpudp_magic(ip_hdr(skb)->saddr,
- ip_hdr(skb)->daddr,
- udp_len, IPPROTO_UDP,
- csum_partial(uh, udp_len, 0));
- if (uh->check == 0)
- uh->check = CSUM_MANGLED_0;
-
- csum_info->transmit.udp_checksum = 0;
+ } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (net_trans_info & INFO_TCP) {
+ rndis_msg_size += NDIS_CSUM_PPI_SIZE;
+ ppi = init_ppi_data(rndis_msg, NDIS_CSUM_PPI_SIZE,
+ TCPIP_CHKSUM_PKTINFO);
+
+ csum_info = (struct ndis_tcp_ip_checksum_info *)((void *)ppi +
+ ppi->ppi_offset);
+
+ if (net_trans_info & (INFO_IPV4 << 16))
+ csum_info->transmit.is_ipv4 = 1;
+ else
+ csum_info->transmit.is_ipv6 = 1;
+
+ csum_info->transmit.tcp_checksum = 1;
+ csum_info->transmit.tcp_header_offset = hdr_offset;
+ } else {
+ /* UDP checksum (and other) offload is not supported. */
+ if (skb_checksum_help(skb))
+ goto drop;
+ }
}
-do_send:
/* Start filling in the page buffers with the rndis hdr */
rndis_msg->msg_len += rndis_msg_size;
packet->total_data_buflen = rndis_msg->msg_len;
--
2.9.3
next reply other threads:[~2016-10-11 21:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-11 21:03 Stephen Hemminger [this message]
2016-10-12 16:58 ` [PATCH net v2] netvsc: fix checksum on UDP IPV6 Stephen Hemminger
2016-10-13 14:48 ` [PATCH net] " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161011140307.15fd390b@xeon-e3 \
--to=stephen@networkplumber.org \
--cc=davem@davemloft.net \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).