From: Tom Herbert <tom@herbertland.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>,
<roopa@cumulusnetworks.com>
Cc: <kernel-team@fb.com>
Subject: [PATCH v2 net-next 2/2] ila: Cache a route to translated address
Date: Fri, 14 Oct 2016 11:25:37 -0700 [thread overview]
Message-ID: <20161014182537.1713757-3-tom@herbertland.com> (raw)
In-Reply-To: <20161014182537.1713757-1-tom@herbertland.com>
Add a dst_cache to ila_lwt structure. This holds a cached route for the
translated address. In ila_output we now perform a route lookup after
translation and if possible (destination in original route is full 128
bits) we set the dst_cache. Subsequent calls to ila_output can then use
the cache to avoid the route lookup.
This eliminates the need to set the gateway on ILA routes as previously
was being done. Now we can do something like:
./ip route add 3333::2000:0:0:2/128 encap ila 2222:0:0:2 \
csum-mode neutral-map dev eth0 ## No via needed!
Signed-off-by: Tom Herbert <tom@herbertland.com>
---
net/ipv6/ila/ila_lwt.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 74 insertions(+), 6 deletions(-)
diff --git a/net/ipv6/ila/ila_lwt.c b/net/ipv6/ila/ila_lwt.c
index e50c27a..d0a98d9 100644
--- a/net/ipv6/ila/ila_lwt.c
+++ b/net/ipv6/ila/ila_lwt.c
@@ -6,29 +6,80 @@
#include <linux/socket.h>
#include <linux/types.h>
#include <net/checksum.h>
+#include <net/dst_cache.h>
#include <net/ip.h>
#include <net/ip6_fib.h>
+#include <net/ip6_route.h>
#include <net/lwtunnel.h>
#include <net/protocol.h>
#include <uapi/linux/ila.h>
#include "ila.h"
+struct ila_lwt {
+ struct ila_params p;
+ struct dst_cache dst_cache;
+ u32 connected : 1;
+};
+
+static inline struct ila_lwt *ila_lwt_lwtunnel(
+ struct lwtunnel_state *lwt)
+{
+ return (struct ila_lwt *)lwt->data;
+}
+
static inline struct ila_params *ila_params_lwtunnel(
- struct lwtunnel_state *lwstate)
+ struct lwtunnel_state *lwt)
{
- return (struct ila_params *)lwstate->data;
+ return &ila_lwt_lwtunnel(lwt)->p;
}
static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
- struct dst_entry *dst = skb_dst(skb);
+ struct dst_entry *orig_dst = skb_dst(skb);
+ struct ila_lwt *ilwt = ila_lwt_lwtunnel(orig_dst->lwtstate);
+ struct dst_entry *dst;
+ int err = -EINVAL;
if (skb->protocol != htons(ETH_P_IPV6))
goto drop;
- ila_update_ipv6_locator(skb, ila_params_lwtunnel(dst->lwtstate), true);
+ ila_update_ipv6_locator(skb, ila_params_lwtunnel(orig_dst->lwtstate),
+ true);
+
+ dst = dst_cache_get(&ilwt->dst_cache);
+ if (unlikely(!dst)) {
+ struct ipv6hdr *ip6h = ipv6_hdr(skb);
+ struct flowi6 fl6;
+
+ /* Lookup a route for the new destination. Take into
+ * account that the base route may already have a gateway.
+ */
+
+ memset(&fl6, 0, sizeof(fl6));
+ fl6.flowi6_oif = orig_dst->dev->ifindex;
+ fl6.flowi6_iif = LOOPBACK_IFINDEX;
+ fl6.daddr = *rt6_nexthop((struct rt6_info *)orig_dst,
+ &ip6h->daddr);
+
+ dst = ip6_route_output(net, NULL, &fl6);
+ if (dst->error) {
+ err = -EHOSTUNREACH;
+ dst_release(dst);
+ goto drop;
+ }
+
+ dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
+ if (IS_ERR(dst)) {
+ err = PTR_ERR(dst);
+ goto drop;
+ }
+
+ if (ilwt->connected)
+ dst_cache_set_ip6(&ilwt->dst_cache, dst, &fl6.saddr);
+ }
- return dst->lwtstate->orig_output(net, sk, skb);
+ skb_dst_set(skb, dst);
+ return dst_output(net, sk, skb);
drop:
kfree_skb(skb);
@@ -60,6 +111,7 @@ static int ila_build_state(struct net_device *dev, struct nlattr *nla,
unsigned int family, const void *cfg,
struct lwtunnel_state **ts)
{
+ struct ila_lwt *ilwt;
struct ila_params *p;
struct nlattr *tb[ILA_ATTR_MAX + 1];
size_t encap_len = sizeof(*p);
@@ -71,7 +123,7 @@ static int ila_build_state(struct net_device *dev, struct nlattr *nla,
if (family != AF_INET6)
return -EINVAL;
- if (cfg6->fc_dst_len < sizeof(struct ila_locator) + 1) {
+ if (cfg6->fc_dst_len < 8 * sizeof(struct ila_locator) + 3) {
/* Need to have full locator and at least type field
* included in destination
*/
@@ -99,6 +151,13 @@ static int ila_build_state(struct net_device *dev, struct nlattr *nla,
if (!newts)
return -ENOMEM;
+ ilwt = ila_lwt_lwtunnel(newts);
+ ret = dst_cache_init(&ilwt->dst_cache, GFP_ATOMIC);
+ if (ret) {
+ kfree(newts);
+ return ret;
+ }
+
newts->len = encap_len;
p = ila_params_lwtunnel(newts);
@@ -120,11 +179,19 @@ static int ila_build_state(struct net_device *dev, struct nlattr *nla,
newts->flags |= LWTUNNEL_STATE_OUTPUT_REDIRECT |
LWTUNNEL_STATE_INPUT_REDIRECT;
+ if (cfg6->fc_dst_len == 8 * sizeof(struct in6_addr))
+ ilwt->connected = 1;
+
*ts = newts;
return 0;
}
+static void ila_destroy_state(struct lwtunnel_state *lwt)
+{
+ dst_cache_destroy(&ila_lwt_lwtunnel(lwt)->dst_cache);
+}
+
static int ila_fill_encap_info(struct sk_buff *skb,
struct lwtunnel_state *lwtstate)
{
@@ -159,6 +226,7 @@ static int ila_encap_cmp(struct lwtunnel_state *a, struct lwtunnel_state *b)
static const struct lwtunnel_encap_ops ila_encap_ops = {
.build_state = ila_build_state,
+ .destroy_state = ila_destroy_state,
.output = ila_output,
.input = ila_input,
.fill_encap = ila_fill_encap_info,
--
2.9.3
next prev parent reply other threads:[~2016-10-14 18:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-14 18:25 [PATCH v2 net-next 0/2] ila: Cache a route in ILA lwt structure Tom Herbert
2016-10-14 18:25 ` [PATCH v2 net-next 1/2] lwtunnel: Add destroy state operation Tom Herbert
2016-10-14 18:25 ` Tom Herbert [this message]
2016-10-15 21:34 ` [PATCH v2 net-next 0/2] ila: Cache a route in ILA lwt structure David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161014182537.1713757-3-tom@herbertland.com \
--to=tom@herbertland.com \
--cc=davem@davemloft.net \
--cc=kernel-team@fb.com \
--cc=netdev@vger.kernel.org \
--cc=roopa@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).