From: Jarod Wilson <jarod@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jarod Wilson <jarod@redhat.com>,
netdev@vger.kernel.org, Denis Kirjanov <kda@linux-powerpc.org>
Subject: [PATCH net-next 09/15] ethernet/dlink: use core min/max MTU checking
Date: Mon, 17 Oct 2016 15:54:11 -0400 [thread overview]
Message-ID: <20161017195417.48259-10-jarod@redhat.com> (raw)
In-Reply-To: <20161017195417.48259-1-jarod@redhat.com>
dl2k: min_mtu 68, max_mtu 1536 or 8000, depending on hardware
- Removed change_mtu, does nothing productive anymore
sundance: min_mtu 68, max_mtu 8191
CC: netdev@vger.kernel.org
CC: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/net/ethernet/dlink/dl2k.c | 22 ++++------------------
drivers/net/ethernet/dlink/sundance.c | 6 ++++--
2 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index 78f1446..8c95a8a 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -76,7 +76,6 @@ static void rio_free_tx (struct net_device *dev, int irq);
static void tx_error (struct net_device *dev, int tx_status);
static int receive_packet (struct net_device *dev);
static void rio_error (struct net_device *dev, int int_status);
-static int change_mtu (struct net_device *dev, int new_mtu);
static void set_multicast (struct net_device *dev);
static struct net_device_stats *get_stats (struct net_device *dev);
static int clear_stats (struct net_device *dev);
@@ -106,7 +105,6 @@ static const struct net_device_ops netdev_ops = {
.ndo_set_rx_mode = set_multicast,
.ndo_do_ioctl = rio_ioctl,
.ndo_tx_timeout = rio_tx_timeout,
- .ndo_change_mtu = change_mtu,
};
static int
@@ -230,6 +228,10 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
#if 0
dev->features = NETIF_F_IP_CSUM;
#endif
+ /* MTU range: 68 - 1536 or 8000 */
+ dev->min_mtu = ETH_MIN_MTU;
+ dev->max_mtu = np->jumbo ? MAX_JUMBO : PACKET_SIZE;
+
pci_set_drvdata (pdev, dev);
ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma);
@@ -1198,22 +1200,6 @@ clear_stats (struct net_device *dev)
return 0;
}
-
-static int
-change_mtu (struct net_device *dev, int new_mtu)
-{
- struct netdev_private *np = netdev_priv(dev);
- int max = (np->jumbo) ? MAX_JUMBO : 1536;
-
- if ((new_mtu < 68) || (new_mtu > max)) {
- return -EINVAL;
- }
-
- dev->mtu = new_mtu;
-
- return 0;
-}
-
static void
set_multicast (struct net_device *dev)
{
diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index 79d8009..eab36ac 100644
--- a/drivers/net/ethernet/dlink/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c
@@ -580,6 +580,10 @@ static int sundance_probe1(struct pci_dev *pdev,
dev->ethtool_ops = ðtool_ops;
dev->watchdog_timeo = TX_TIMEOUT;
+ /* MTU range: 68 - 8191 */
+ dev->min_mtu = ETH_MIN_MTU;
+ dev->max_mtu = 8191;
+
pci_set_drvdata(pdev, dev);
i = register_netdev(dev);
@@ -713,8 +717,6 @@ static int sundance_probe1(struct pci_dev *pdev,
static int change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */
- return -EINVAL;
if (netif_running(dev))
return -EBUSY;
dev->mtu = new_mtu;
--
2.10.0
next prev parent reply other threads:[~2016-10-17 19:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 19:54 [PATCH net-next 00/15] ethernet: use core min/max MTU checking Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 01/15] ethernet/atheros: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 02/15] ethernet/broadcom: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 03/15] ethernet/intel: " Jarod Wilson
2016-10-17 20:20 ` Jakub Kicinski
2016-10-17 19:54 ` [PATCH net-next 04/15] ethernet/marvell: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 05/15] ethernet/mellanox: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 06/15] ethernet/qlogic: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 07/15] ethernet/realtek: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 08/15] ethernet/sun: " Jarod Wilson
2016-10-17 19:54 ` Jarod Wilson [this message]
2016-10-18 13:45 ` [PATCH net-next 09/15] ethernet/dlink: " Denis Kirjanov
2016-10-18 15:04 ` Jarod Wilson
2016-10-22 9:54 ` Stefan Richter
2016-10-17 19:54 ` [PATCH net-next 10/15] ethernet/neterion: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 11/15] ethernet/cavium: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 12/15] ethernet/ibm: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 13/15] ethernet/tile: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 14/15] ethernet/toshiba: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 15/15] ethernet: " Jarod Wilson
2016-10-17 20:03 ` [PATCH net-next 00/15] " David Miller
2016-10-17 20:29 ` Jarod Wilson
2016-10-18 15:33 ` David Miller
2016-10-18 22:28 ` Jarod Wilson
2016-10-19 2:35 ` Jarod Wilson
2016-10-18 15:34 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161017195417.48259-10-jarod@redhat.com \
--to=jarod@redhat.com \
--cc=kda@linux-powerpc.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).