netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarod Wilson <jarod@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jarod Wilson <jarod@redhat.com>,
	netdev@vger.kernel.org,
	Douglas Miller <dougmill@linux.vnet.ibm.com>
Subject: [PATCH net-next 12/15] ethernet/ibm: use core min/max MTU checking
Date: Mon, 17 Oct 2016 15:54:14 -0400	[thread overview]
Message-ID: <20161017195417.48259-13-jarod@redhat.com> (raw)
In-Reply-To: <20161017195417.48259-1-jarod@redhat.com>

ehea: min_mtu 68, max_mtu 9022
- remove ehea_change_mtu, it's now redundant

emac: min_mtu 46, max_mtu 1500 or whatever gets read from OF

CC: netdev@vger.kernel.org
CC: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 13 ++++---------
 drivers/net/ethernet/ibm/emac/core.c      |  9 +++++----
 2 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 54efa9a..e9719ba 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -1981,14 +1981,6 @@ static void ehea_set_multicast_list(struct net_device *dev)
 	ehea_update_bcmc_registrations();
 }
 
-static int ehea_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if ((new_mtu < 68) || (new_mtu > EHEA_MAX_PACKET_SIZE))
-		return -EINVAL;
-	dev->mtu = new_mtu;
-	return 0;
-}
-
 static void xmit_common(struct sk_buff *skb, struct ehea_swqe *swqe)
 {
 	swqe->tx_control |= EHEA_SWQE_IMM_DATA_PRESENT | EHEA_SWQE_CRC;
@@ -2968,7 +2960,6 @@ static const struct net_device_ops ehea_netdev_ops = {
 	.ndo_set_mac_address	= ehea_set_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_rx_mode	= ehea_set_multicast_list,
-	.ndo_change_mtu		= ehea_change_mtu,
 	.ndo_vlan_rx_add_vid	= ehea_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= ehea_vlan_rx_kill_vid,
 	.ndo_tx_timeout		= ehea_tx_watchdog,
@@ -3041,6 +3032,10 @@ static struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 			NETIF_F_IP_CSUM;
 	dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
 
+	/* MTU range: 68 - 9022 */
+	dev->min_mtu = ETH_MIN_MTU;
+	dev->max_mtu = EHEA_MAX_PACKET_SIZE;
+
 	INIT_WORK(&port->reset_task, ehea_reset_port);
 	INIT_DELAYED_WORK(&port->stats_work, ehea_update_stats);
 
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 5d804a5..52a69c9 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -1099,9 +1099,6 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
 	struct emac_instance *dev = netdev_priv(ndev);
 	int ret = 0;
 
-	if (new_mtu < EMAC_MIN_MTU || new_mtu > dev->max_mtu)
-		return -EINVAL;
-
 	DBG(dev, "change_mtu(%d)" NL, new_mtu);
 
 	if (netif_running(ndev)) {
@@ -2564,7 +2561,7 @@ static int emac_init_config(struct emac_instance *dev)
 	if (emac_read_uint_prop(np, "cell-index", &dev->cell_index, 1))
 		return -ENXIO;
 	if (emac_read_uint_prop(np, "max-frame-size", &dev->max_mtu, 0))
-		dev->max_mtu = 1500;
+		dev->max_mtu = ETH_DATA_LEN;
 	if (emac_read_uint_prop(np, "rx-fifo-size", &dev->rx_fifo_size, 0))
 		dev->rx_fifo_size = 2048;
 	if (emac_read_uint_prop(np, "tx-fifo-size", &dev->tx_fifo_size, 0))
@@ -2890,6 +2887,10 @@ static int emac_probe(struct platform_device *ofdev)
 		ndev->netdev_ops = &emac_netdev_ops;
 	ndev->ethtool_ops = &emac_ethtool_ops;
 
+	/* MTU range: 46 - 1500 or whatever is in OF */
+	ndev->min_mtu = EMAC_MIN_MTU;
+	ndev->max_mtu = dev->max_mtu;
+
 	netif_carrier_off(ndev);
 
 	err = register_netdev(ndev);
-- 
2.10.0

  parent reply	other threads:[~2016-10-17 19:54 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-17 19:54 [PATCH net-next 00/15] ethernet: use core min/max MTU checking Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 01/15] ethernet/atheros: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 02/15] ethernet/broadcom: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 03/15] ethernet/intel: " Jarod Wilson
2016-10-17 20:20   ` Jakub Kicinski
2016-10-17 19:54 ` [PATCH net-next 04/15] ethernet/marvell: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 05/15] ethernet/mellanox: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 06/15] ethernet/qlogic: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 07/15] ethernet/realtek: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 08/15] ethernet/sun: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 09/15] ethernet/dlink: " Jarod Wilson
2016-10-18 13:45   ` Denis Kirjanov
2016-10-18 15:04     ` Jarod Wilson
2016-10-22  9:54       ` Stefan Richter
2016-10-17 19:54 ` [PATCH net-next 10/15] ethernet/neterion: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 11/15] ethernet/cavium: " Jarod Wilson
2016-10-17 19:54 ` Jarod Wilson [this message]
2016-10-17 19:54 ` [PATCH net-next 13/15] ethernet/tile: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 14/15] ethernet/toshiba: " Jarod Wilson
2016-10-17 19:54 ` [PATCH net-next 15/15] ethernet: " Jarod Wilson
2016-10-17 20:03 ` [PATCH net-next 00/15] " David Miller
2016-10-17 20:29   ` Jarod Wilson
2016-10-18 15:33     ` David Miller
2016-10-18 22:28       ` Jarod Wilson
2016-10-19  2:35         ` Jarod Wilson
2016-10-18 15:34 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161017195417.48259-13-jarod@redhat.com \
    --to=jarod@redhat.com \
    --cc=dougmill@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).