From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Cercueil Subject: [PATCH 1/2] Documentation: devicetree: Add bindings info for rfkill-regulator Date: Tue, 1 Nov 2016 11:58:39 +0100 Message-ID: <20161101105840.24313-1-paul@crapouillou.net> Cc: Maarten ter Huurne , Paul Cercueil To: Johannes Berg , "David S . Miller" , Rob Herring , Mark Rutland , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org This document gives information about how to write a devicetree node that corresponds to the rfkill-regulator driver. Signed-off-by: Paul Cercueil --- .../devicetree/bindings/net/rfkill-regulator.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/rfkill-regulator.txt diff --git a/Documentation/devicetree/bindings/net/rfkill-regulator.txt b/Documentation/devicetree/bindings/net/rfkill-regulator.txt new file mode 100644 index 0000000..aac2fe1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/rfkill-regulator.txt @@ -0,0 +1,18 @@ +Device tree bindings for the rfkill-regulator driver + +Required properties: + - compatible: should be "rfkill-regulator" + - rfkill-name: the name of this rfkill device + - rfkill-type: the type of this rfkill device; + must correspond to a valid rfkill_type from + - vrfkill-supply: phandle to a regulator + +Example: + + wlan-rfkill { + compatible = "rfkill-regulator"; + rfkill-name = "WLAN power switch"; + rfkill-type = <1>; + + vrfkill-supply = <&wlan_power>; + }; -- 2.9.3