From: Tom Lendacky <thomas.lendacky@amd.com>
To: <netdev@vger.kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
David Miller <davem@davemloft.net>
Subject: [PATCH net-next v1 18/21] net: phy: expose phy_aneg_done API for use by drivers
Date: Thu, 3 Nov 2016 08:30:46 -0500 [thread overview]
Message-ID: <20161103133046.3437.21618.stgit@tlendack-t1.amdoffice.net> (raw)
In-Reply-To: <20161103132744.3437.27332.stgit@tlendack-t1.amdoffice.net>
Make phy_aneg_done() available to drivers so that the result of the
auto-negotiation initiated by phy_start_aneg() can be determined.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
drivers/net/phy/phy.c | 3 ++-
include/linux/phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 2f94c60..e6dd222 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -143,13 +143,14 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
* Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
* is still pending.
*/
-static inline int phy_aneg_done(struct phy_device *phydev)
+int phy_aneg_done(struct phy_device *phydev)
{
if (phydev->drv->aneg_done)
return phydev->drv->aneg_done(phydev);
return genphy_aneg_done(phydev);
}
+EXPORT_SYMBOL(phy_aneg_done);
/* A structure for mapping a particular speed and duplex
* combination to a particular SUPPORTED and ADVERTISED value
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e7e1fd3..9880d73 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -786,6 +786,7 @@ struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
void phy_start(struct phy_device *phydev);
void phy_stop(struct phy_device *phydev);
int phy_start_aneg(struct phy_device *phydev);
+int phy_aneg_done(struct phy_device *phydev);
int phy_stop_interrupts(struct phy_device *phydev);
next prev parent reply other threads:[~2016-11-03 13:45 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-03 13:27 [PATCH net-next v1 00/21] amd-xgbe: AMD XGBE driver updates 2016-11-01 Tom Lendacky
2016-11-03 13:27 ` [PATCH net-next v1 01/21] amd-xgbe: Fix formatting of PCS register dump Tom Lendacky
2016-11-03 13:28 ` [PATCH net-next v1 02/21] amd-xgbe: Prepare for priority-based FIFO allocation Tom Lendacky
2016-11-03 13:51 ` Mintz, Yuval
2016-11-03 14:50 ` Tom Lendacky
2016-11-03 13:28 ` [PATCH net-next v1 03/21] amd-xgbe: Perform priority-based hardware " Tom Lendacky
2016-11-03 13:28 ` [PATCH net-next v1 04/21] amd-xgbe: Prepare for working with more than one type of phy Tom Lendacky
2016-11-03 13:28 ` [PATCH net-next v1 05/21] amd-xgbe: Prepare for introduction of clause 37 autoneg Tom Lendacky
2016-11-03 13:28 ` [PATCH net-next v1 06/21] amd-xgbe: Add support for clause 37 auto-negotiation Tom Lendacky
2016-11-03 13:28 ` [PATCH net-next v1 07/21] amd-xgbe: Prepare for a new PCS register access method Tom Lendacky
2016-11-03 13:29 ` [PATCH net-next v1 08/21] amd-xgbe: Support for 64-bit management counter registers Tom Lendacky
2016-11-03 13:29 ` [PATCH net-next v1 09/21] amd-xgbe: Update how to determine DMA channel status Tom Lendacky
2016-11-03 13:29 ` [PATCH net-next v1 10/21] amd-xgbe: Prepare for supporting PCI devices Tom Lendacky
2016-11-03 13:29 ` [PATCH net-next v1 11/21] amd-xgbe: Guard against incorrectly generated interrupts Tom Lendacky
2016-11-03 13:29 ` [PATCH net-next v1 12/21] amd-xgbe: Add a workaround for Tx timestamp issue Tom Lendacky
2016-11-03 13:29 ` [PATCH net-next v1 13/21] amd-xgbe: Add PCI device support Tom Lendacky
2016-11-03 13:30 ` [PATCH net-next v1 14/21] amd-xgbe: Allow for a greater number of Rx queues Tom Lendacky
2016-11-03 13:30 ` [PATCH net-next v1 15/21] amd-xgbe: Add support for new DMA interrupt mode Tom Lendacky
2016-11-03 13:30 ` [PATCH net-next v1 16/21] amd-xgbe: Add ECC status support for the device memory Tom Lendacky
2016-11-03 13:30 ` [PATCH net-next v1 17/21] amd-xgbe: Add I2C support for determining SFP media types Tom Lendacky
2016-11-03 14:28 ` Andrew Lunn
2016-11-03 15:01 ` Tom Lendacky
2016-11-03 15:18 ` Andrew Lunn
2016-11-09 15:35 ` Tom Lendacky
2016-11-03 13:30 ` Tom Lendacky [this message]
2016-11-04 2:13 ` [PATCH net-next v1 18/21] net: phy: expose phy_aneg_done API for use by drivers kbuild test robot
2016-11-07 15:01 ` Tom Lendacky
2016-11-08 10:17 ` Andreas Larsson
2016-11-03 13:30 ` [PATCH net-next v1 19/21] amd-xgbe: Add support for SFP+ modules Tom Lendacky
2016-11-03 13:31 ` [PATCH net-next v1 20/21] amd-xgbe: Add support for MDIO attached PHYs Tom Lendacky
2016-11-03 13:31 ` [PATCH net-next v1 21/21] amd-xgbe: Add support for a KR redriver Tom Lendacky
2016-11-03 17:14 ` [PATCH net-next v1 00/21] amd-xgbe: AMD XGBE driver updates 2016-11-01 David Miller
2016-11-03 17:23 ` Tom Lendacky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161103133046.3437.21618.stgit@tlendack-t1.amdoffice.net \
--to=thomas.lendacky@amd.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).