From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, bridge@lists.linux-foundation.org,
stephen@networkplumber.org, vivien.didelot@savoirfairelinux.com,
andrew@lunn.ch, jiri@mellanox.com, idosch@mellanox.com,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [RFC net-next 3/3] net: dsa: b53: Remove CPU port specific VLAN programming
Date: Mon, 21 Nov 2016 11:09:25 -0800 [thread overview]
Message-ID: <20161121190925.14530-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20161121190925.14530-1-f.fainelli@gmail.com>
Now that DSA calls into the switch driver to program the CPU port's VLAN
attributes, we can get rid of the code that dealt with adding/removing
the CPU port to a downstream facing port VLAN membership.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 7717b19dc806..6577286a2721 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -951,7 +951,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
- unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
u16 vid;
@@ -960,11 +959,11 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
b53_get_vlan_entry(dev, vid, vl);
- vl->members |= BIT(port) | BIT(cpu_port);
+ vl->members |= BIT(port);
if (untagged)
- vl->untag |= BIT(port) | BIT(cpu_port);
+ vl->untag |= BIT(port);
else
- vl->untag &= ~(BIT(port) | BIT(cpu_port));
+ vl->untag &= ~BIT(port);
b53_set_vlan_entry(dev, vid, vl);
b53_fast_age_vlan(dev, vid);
@@ -973,8 +972,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
if (pvid) {
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
vlan->vid_end);
- b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port),
- vlan->vid_end);
b53_fast_age_vlan(dev, vid);
}
}
@@ -984,7 +981,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
{
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
- unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
u16 vid;
u16 pvid;
@@ -997,8 +993,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
b53_get_vlan_entry(dev, vid, vl);
vl->members &= ~BIT(port);
- if ((vl->members & BIT(cpu_port)) == BIT(cpu_port))
- vl->members = 0;
if (pvid == vid) {
if (is5325(dev) || is5365(dev))
@@ -1007,18 +1001,14 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
pvid = 0;
}
- if (untagged) {
+ if (untagged)
vl->untag &= ~(BIT(port));
- if ((vl->untag & BIT(cpu_port)) == BIT(cpu_port))
- vl->untag = 0;
- }
b53_set_vlan_entry(dev, vid, vl);
b53_fast_age_vlan(dev, vid);
}
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
- b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port), pvid);
b53_fast_age_vlan(dev, pvid);
return 0;
@@ -1396,8 +1386,8 @@ static void b53_br_leave(struct dsa_switch *ds, int port)
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
} else {
b53_get_vlan_entry(dev, pvid, vl);
- vl->members |= BIT(port) | BIT(dev->cpu_port);
- vl->untag |= BIT(port) | BIT(dev->cpu_port);
+ vl->members |= BIT(port);
+ vl->untag |= BIT(port);
b53_set_vlan_entry(dev, pvid, vl);
}
}
--
2.9.3
next prev parent reply other threads:[~2016-11-21 19:10 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 19:09 [RFC net-next 0/3] net: bridge: Allow CPU port configuration Florian Fainelli
2016-11-21 19:09 ` [RFC net-next 1/3] net: bridge: Allow bridge master device to configure switch CPU port Florian Fainelli
2016-11-22 15:46 ` Vivien Didelot
2016-11-24 1:49 ` Toshiaki Makita
2016-11-21 19:09 ` [RFC net-next 2/3] net: dsa: Propagate VLAN add/del to CPU port(s) Florian Fainelli
2016-11-22 16:50 ` Vivien Didelot
2016-11-28 4:30 ` Florian Fainelli
2016-11-21 19:09 ` Florian Fainelli [this message]
2016-11-22 12:49 ` [RFC net-next 0/3] net: bridge: Allow CPU port configuration Jiri Pirko
2016-11-22 15:29 ` Vivien Didelot
2016-11-22 17:41 ` Ido Schimmel
2016-11-22 17:48 ` Andrew Lunn
2016-11-22 22:08 ` Jiri Pirko
2016-11-23 0:24 ` Florian Fainelli
2016-11-23 8:21 ` Jiri Pirko
2016-11-22 17:56 ` Florian Fainelli
2016-11-23 13:48 ` Ido Schimmel
2016-12-01 20:21 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121190925.14530-4-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=idosch@mellanox.com \
--cc=jiri@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).