From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
mugunthanvnm@ti.com, linux-omap@vger.kernel.org
Subject: Re: [PATCH 0/5] cpsw: add per channel shaper configuration
Date: Mon, 5 Dec 2016 22:59:04 +0200 [thread overview]
Message-ID: <20161205205903.GA15264@khorivan> (raw)
In-Reply-To: <4640ce88-75b0-8508-05f0-849e8fd4927f@ti.com>
On Mon, Dec 05, 2016 at 02:33:40PM -0600, Grygorii Strashko wrote:
> Hi Ivan,
>
> On 11/29/2016 09:00 AM, Ivan Khoronzhuk wrote:
> > This series is intended to allow user to set rate for per channel
> > shapers at cpdma level. This patchset doesn't have impact on performance.
> > The rate can be set with:
> >
> > echo 100 > /sys/class/net/ethX/queues/tx-0/tx_maxrate
> >
> > Tested on am572xx
> > Based on net-next/master
> >
> > Ivan Khoronzhuk (5):
> > net: ethernet: ti: davinci_cpdma: add weight function for channels
> > net: ethernet: ti: davinci_cpdma: add set rate for a channel
> > net: ethernet: ti: cpsw: add .ndo to set per-queue rate
> > net: ethernet: ti: cpsw: optimize end of poll cycle
> > net: ethernet: ti: cpsw: split tx budget according between channels
> >
> > drivers/net/ethernet/ti/cpsw.c | 264 +++++++++++++++----
> > drivers/net/ethernet/ti/davinci_cpdma.c | 453 ++++++++++++++++++++++++++++----
> > drivers/net/ethernet/ti/davinci_cpdma.h | 6 +
> > 3 files changed, 624 insertions(+), 99 deletions(-)
> >
>
>
> I've just tried net-next on BBB and got below back-trace:
I'd not tested on BBB, and expected some review before apply.
Seems that's because of phy speed, let me finish a fix patch.
Thanks.
> INIT: Entering runlevel: 5
> Configuring network interfaces... [ 15.018356] net eth0: initializing cpsw version 1.12 (0)
> [ 15.120153] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
> [ 15.138578] Division by zero in kernel.
> [ 15.142667] CPU: 0 PID: 755 Comm: ifconfig Not tainted 4.9.0-rc7-01617-g6ea3f00 #5
> [ 15.150277] Hardware name: Generic AM33XX (Flattened Device Tree)
> [ 15.156399] Backtrace:
> [ 15.158898] [<c010bbf8>] (dump_backtrace) from [<c010beb4>] (show_stack+0x18/0x1c)
> [ 15.166508] r7:00000000 r6:600f0013 r5:00000000 r4:c0d395d0
> [ 15.172200] [<c010be9c>] (show_stack) from [<c03ce6cc>] (dump_stack+0x8c/0xa0)
> [ 15.179460] [<c03ce640>] (dump_stack) from [<c010bd60>] (__div0+0x1c/0x20)
> [ 15.186368] r7:00000000 r6:ddf1c010 r5:00000001 r4:00000001
> [ 15.192068] [<c010bd44>] (__div0) from [<c03cd17c>] (Ldiv0+0x8/0x14)
> [ 15.198503] [<bf07ba38>] (cpsw_split_budget [ti_cpsw]) from [<bf07ee8c>] (cpsw_ndo_open+0x4b8/0x5e4 [ti_cpsw])
> [ 15.208554] r10:ddf1c010 r9:00000000 r8:00000000 r7:ddf1c010 r6:dcc88000 r5:dcc88500
> [ 15.216418] r4:ddf1c0b0
> [ 15.218985] [<bf07e9d4>] (cpsw_ndo_open [ti_cpsw]) from [<c0731c68>] (__dev_open+0xb0/0x114)
> [ 15.227466] r10:00000000 r9:00000000 r8:00000000 r7:dcc88030 r6:bf080364 r5:00000000
> [ 15.235330] r4:dcc88000
> [ 15.237880] [<c0731bb8>] (__dev_open) from [<c0731f24>] (__dev_change_flags+0x9c/0x14c)
> [ 15.245923] r7:00001002 r6:00000001 r5:00001043 r4:dcc88000
> [ 15.251613] [<c0731e88>] (__dev_change_flags) from [<c0731ff4>] (dev_change_flags+0x20/0x50)
> [ 15.260093] r9:00000000 r8:00000000 r7:dcbabf0c r6:00001002 r5:dcc8813c r4:dcc88000
> [ 15.267886] [<c0731fd4>] (dev_change_flags) from [<c07a3168>] (devinet_ioctl+0x6d4/0x794)
> [ 15.276105] r9:00000000 r8:bee8cc64 r7:dcbabf0c r6:00000000 r5:dc921e80 r4:00000000
> [ 15.283891] [<c07a2a94>] (devinet_ioctl) from [<c07a54bc>] (inet_ioctl+0x19c/0x1c8)
> [ 15.291587] r10:00000000 r9:dc920000 r8:bee8cc64 r7:c0d64bc0 r6:bee8cc64 r5:dd2728e0
> [ 15.299450] r4:00008914
> [ 15.302002] [<c07a5320>] (inet_ioctl) from [<c07112dc>] (sock_ioctl+0x14c/0x300)
> [ 15.309443] [<c0711190>] (sock_ioctl) from [<c0241868>] (do_vfs_ioctl+0xa8/0x98c)
> [ 15.316962] r7:00000003 r6:ddf0a780 r5:dd2728e0 r4:bee8cc64
> [ 15.322653] [<c02417c0>] (do_vfs_ioctl) from [<c0242188>] (SyS_ioctl+0x3c/0x64)
> [ 15.330000] r10:00000000 r9:dc920000 r8:bee8cc64 r7:00008914 r6:ddf0a780 r5:00000003
> [ 15.337864] r4:ddf0a780
> [ 15.340416] [<c024214c>] (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x3c)
> [ 15.348024] r9:dc920000 r8:c0107f24 r7:00000036 r6:bee8cf4d r5:bee8ce4c r4:000949f0
> [ 15.361174] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> udhcpc (v1.23.1) started
>
>
> --
> regards,
> -grygorii
next prev parent reply other threads:[~2016-12-05 20:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 15:00 [PATCH 0/5] cpsw: add per channel shaper configuration Ivan Khoronzhuk
2016-11-29 15:00 ` [PATCH 1/5] net: ethernet: ti: davinci_cpdma: add weight function for channels Ivan Khoronzhuk
2016-11-29 15:00 ` [PATCH 2/5] net: ethernet: ti: davinci_cpdma: add set rate for a channel Ivan Khoronzhuk
2016-11-29 15:00 ` [PATCH 3/5] net: ethernet: ti: cpsw: add .ndo to set per-queue rate Ivan Khoronzhuk
2016-11-29 15:00 ` [PATCH 4/5] net: ethernet: ti: cpsw: optimize end of poll cycle Ivan Khoronzhuk
2016-11-29 15:00 ` [PATCH 5/5] net: ethernet: ti: cpsw: split tx budget according between channels Ivan Khoronzhuk
2016-11-30 19:37 ` [PATCH 0/5] cpsw: add per channel shaper configuration David Miller
2016-12-05 20:33 ` Grygorii Strashko
2016-12-05 20:59 ` Ivan Khoronzhuk [this message]
2016-12-06 13:35 ` Ivan Khoronzhuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161205205903.GA15264@khorivan \
--to=ivan.khoronzhuk@linaro.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).