From: Kees Cook <keescook@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Paul Bolle <pebolle@tiscali.nl>,
Karsten Keil <isdn@linux-pingi.de>,
"David S. Miller" <davem@davemloft.net>,
Dan Carpenter <dan.carpenter@oracle.com>,
Tilman Schmidt <tilman@imap.cc>,
gigaset307x-common@lists.sourceforge.net, netdev@vger.kernel.org
Subject: [PATCH] isdn/gigaset: use designated initializers
Date: Fri, 16 Dec 2016 16:58:06 -0800 [thread overview]
Message-ID: <20161217005806.GA140074@beast> (raw)
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
---
drivers/isdn/gigaset/bas-gigaset.c | 32 ++++++++++++++++----------------
drivers/isdn/gigaset/ser-gigaset.c | 32 ++++++++++++++++----------------
drivers/isdn/gigaset/usb-gigaset.c | 32 ++++++++++++++++----------------
3 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index aecec6d32463..11e13c56126f 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -2565,22 +2565,22 @@ static int gigaset_post_reset(struct usb_interface *intf)
static const struct gigaset_ops gigops = {
- gigaset_write_cmd,
- gigaset_write_room,
- gigaset_chars_in_buffer,
- gigaset_brkchars,
- gigaset_init_bchannel,
- gigaset_close_bchannel,
- gigaset_initbcshw,
- gigaset_freebcshw,
- gigaset_reinitbcshw,
- gigaset_initcshw,
- gigaset_freecshw,
- gigaset_set_modem_ctrl,
- gigaset_baud_rate,
- gigaset_set_line_ctrl,
- gigaset_isoc_send_skb,
- gigaset_isoc_input,
+ .write_cmd = gigaset_write_cmd,
+ .write_room = gigaset_write_room,
+ .chars_in_buffer = gigaset_chars_in_buffer,
+ .brkchars = gigaset_brkchars,
+ .init_bchannel = gigaset_init_bchannel,
+ .close_bchannel = gigaset_close_bchannel,
+ .initbcshw = gigaset_initbcshw,
+ .freebcshw = gigaset_freebcshw,
+ .reinitbcshw = gigaset_reinitbcshw,
+ .initcshw = gigaset_initcshw,
+ .freecshw = gigaset_freecshw,
+ .set_modem_ctrl = gigaset_set_modem_ctrl,
+ .baud_rate = gigaset_baud_rate,
+ .set_line_ctrl = gigaset_set_line_ctrl,
+ .send_skb = gigaset_isoc_send_skb,
+ .handle_input = gigaset_isoc_input,
};
/* bas_gigaset_init
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index b90776ef56ec..ab0b63a4d045 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -445,22 +445,22 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
}
static const struct gigaset_ops ops = {
- gigaset_write_cmd,
- gigaset_write_room,
- gigaset_chars_in_buffer,
- gigaset_brkchars,
- gigaset_init_bchannel,
- gigaset_close_bchannel,
- gigaset_initbcshw,
- gigaset_freebcshw,
- gigaset_reinitbcshw,
- gigaset_initcshw,
- gigaset_freecshw,
- gigaset_set_modem_ctrl,
- gigaset_baud_rate,
- gigaset_set_line_ctrl,
- gigaset_m10x_send_skb, /* asyncdata.c */
- gigaset_m10x_input, /* asyncdata.c */
+ .write_cmd = gigaset_write_cmd,
+ .write_room = gigaset_write_room,
+ .chars_in_buffer = gigaset_chars_in_buffer,
+ .brkchars = gigaset_brkchars,
+ .init_bchannel = gigaset_init_bchannel,
+ .close_bchannel = gigaset_close_bchannel,
+ .initbcshw = gigaset_initbcshw,
+ .freebcshw = gigaset_freebcshw,
+ .reinitbcshw = gigaset_reinitbcshw,
+ .initcshw = gigaset_initcshw,
+ .freecshw = gigaset_freecshw,
+ .set_modem_ctrl = gigaset_set_modem_ctrl,
+ .baud_rate = gigaset_baud_rate,
+ .set_line_ctrl = gigaset_set_line_ctrl,
+ .send_skb = gigaset_m10x_send_skb, /* asyncdata.c */
+ .handle_input = gigaset_m10x_input, /* asyncdata.c */
};
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 5f306e2eece5..eade36dafa34 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -862,22 +862,22 @@ static int gigaset_pre_reset(struct usb_interface *intf)
}
static const struct gigaset_ops ops = {
- gigaset_write_cmd,
- gigaset_write_room,
- gigaset_chars_in_buffer,
- gigaset_brkchars,
- gigaset_init_bchannel,
- gigaset_close_bchannel,
- gigaset_initbcshw,
- gigaset_freebcshw,
- gigaset_reinitbcshw,
- gigaset_initcshw,
- gigaset_freecshw,
- gigaset_set_modem_ctrl,
- gigaset_baud_rate,
- gigaset_set_line_ctrl,
- gigaset_m10x_send_skb,
- gigaset_m10x_input,
+ .write_cmd = gigaset_write_cmd,
+ .write_room = gigaset_write_room,
+ .chars_in_buffer = gigaset_chars_in_buffer,
+ .brkchars = gigaset_brkchars,
+ .init_bchannel = gigaset_init_bchannel,
+ .close_bchannel = gigaset_close_bchannel,
+ .initbcshw = gigaset_initbcshw,
+ .freebcshw = gigaset_freebcshw,
+ .reinitbcshw = gigaset_reinitbcshw,
+ .initcshw = gigaset_initcshw,
+ .freecshw = gigaset_freecshw,
+ .set_modem_ctrl = gigaset_set_modem_ctrl,
+ .baud_rate = gigaset_baud_rate,
+ .set_line_ctrl = gigaset_set_line_ctrl,
+ .send_skb = gigaset_m10x_send_skb,
+ .handle_input = gigaset_m10x_input,
};
/*
--
2.7.4
--
Kees Cook
Nexus Security
next reply other threads:[~2016-12-17 0:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-17 0:58 Kees Cook [this message]
2016-12-17 16:57 ` [PATCH] isdn/gigaset: use designated initializers David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161217005806.GA140074@beast \
--to=keescook@chromium.org \
--cc=dan.carpenter@oracle.com \
--cc=davem@davemloft.net \
--cc=gigaset307x-common@lists.sourceforge.net \
--cc=isdn@linux-pingi.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pebolle@tiscali.nl \
--cc=tilman@imap.cc \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).