* [PATCH] WAN: use designated initializers
@ 2016-12-17 0:59 Kees Cook
2016-12-17 16:57 ` David Miller
0 siblings, 1 reply; 2+ messages in thread
From: Kees Cook @ 2016-12-17 0:59 UTC (permalink / raw)
To: linux-kernel; +Cc: netdev
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
---
drivers/net/wan/lmc/lmc_media.c | 97 +++++++++++++++++++++--------------------
1 file changed, 49 insertions(+), 48 deletions(-)
diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c
index 5920c996fcdf..ff2e4a5654c7 100644
--- a/drivers/net/wan/lmc/lmc_media.c
+++ b/drivers/net/wan/lmc/lmc_media.c
@@ -95,62 +95,63 @@ static inline void write_av9110_bit (lmc_softc_t *, int);
static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32);
lmc_media_t lmc_ds3_media = {
- lmc_ds3_init, /* special media init stuff */
- lmc_ds3_default, /* reset to default state */
- lmc_ds3_set_status, /* reset status to state provided */
- lmc_dummy_set_1, /* set clock source */
- lmc_dummy_set2_1, /* set line speed */
- lmc_ds3_set_100ft, /* set cable length */
- lmc_ds3_set_scram, /* set scrambler */
- lmc_ds3_get_link_status, /* get link status */
- lmc_dummy_set_1, /* set link status */
- lmc_ds3_set_crc_length, /* set CRC length */
- lmc_dummy_set_1, /* set T1 or E1 circuit type */
- lmc_ds3_watchdog
+ .init = lmc_ds3_init, /* special media init stuff */
+ .defaults = lmc_ds3_default, /* reset to default state */
+ .set_status = lmc_ds3_set_status, /* reset status to state provided */
+ .set_clock_source = lmc_dummy_set_1, /* set clock source */
+ .set_speed = lmc_dummy_set2_1, /* set line speed */
+ .set_cable_length = lmc_ds3_set_100ft, /* set cable length */
+ .set_scrambler = lmc_ds3_set_scram, /* set scrambler */
+ .get_link_status = lmc_ds3_get_link_status, /* get link status */
+ .set_link_status = lmc_dummy_set_1, /* set link status */
+ .set_crc_length = lmc_ds3_set_crc_length, /* set CRC length */
+ .set_circuit_type = lmc_dummy_set_1, /* set T1 or E1 circuit type */
+ .watchdog = lmc_ds3_watchdog
};
lmc_media_t lmc_hssi_media = {
- lmc_hssi_init, /* special media init stuff */
- lmc_hssi_default, /* reset to default state */
- lmc_hssi_set_status, /* reset status to state provided */
- lmc_hssi_set_clock, /* set clock source */
- lmc_dummy_set2_1, /* set line speed */
- lmc_dummy_set_1, /* set cable length */
- lmc_dummy_set_1, /* set scrambler */
- lmc_hssi_get_link_status, /* get link status */
- lmc_hssi_set_link_status, /* set link status */
- lmc_hssi_set_crc_length, /* set CRC length */
- lmc_dummy_set_1, /* set T1 or E1 circuit type */
- lmc_hssi_watchdog
+ .init = lmc_hssi_init, /* special media init stuff */
+ .defaults = lmc_hssi_default, /* reset to default state */
+ .set_status = lmc_hssi_set_status, /* reset status to state provided */
+ .set_clock_source = lmc_hssi_set_clock, /* set clock source */
+ .set_speed = lmc_dummy_set2_1, /* set line speed */
+ .set_cable_length = lmc_dummy_set_1, /* set cable length */
+ .set_scrambler = lmc_dummy_set_1, /* set scrambler */
+ .get_link_status = lmc_hssi_get_link_status, /* get link status */
+ .set_link_status = lmc_hssi_set_link_status, /* set link status */
+ .set_crc_length = lmc_hssi_set_crc_length, /* set CRC length */
+ .set_circuit_type = lmc_dummy_set_1, /* set T1 or E1 circuit type */
+ .watchdog = lmc_hssi_watchdog
};
-lmc_media_t lmc_ssi_media = { lmc_ssi_init, /* special media init stuff */
- lmc_ssi_default, /* reset to default state */
- lmc_ssi_set_status, /* reset status to state provided */
- lmc_ssi_set_clock, /* set clock source */
- lmc_ssi_set_speed, /* set line speed */
- lmc_dummy_set_1, /* set cable length */
- lmc_dummy_set_1, /* set scrambler */
- lmc_ssi_get_link_status, /* get link status */
- lmc_ssi_set_link_status, /* set link status */
- lmc_ssi_set_crc_length, /* set CRC length */
- lmc_dummy_set_1, /* set T1 or E1 circuit type */
- lmc_ssi_watchdog
+lmc_media_t lmc_ssi_media = {
+ .init = lmc_ssi_init, /* special media init stuff */
+ .defaults = lmc_ssi_default, /* reset to default state */
+ .set_status = lmc_ssi_set_status, /* reset status to state provided */
+ .set_clock_source = lmc_ssi_set_clock, /* set clock source */
+ .set_speed = lmc_ssi_set_speed, /* set line speed */
+ .set_cable_length = lmc_dummy_set_1, /* set cable length */
+ .set_scrambler = lmc_dummy_set_1, /* set scrambler */
+ .get_link_status = lmc_ssi_get_link_status, /* get link status */
+ .set_link_status = lmc_ssi_set_link_status, /* set link status */
+ .set_crc_length = lmc_ssi_set_crc_length, /* set CRC length */
+ .set_circuit_type = lmc_dummy_set_1, /* set T1 or E1 circuit type */
+ .watchdog = lmc_ssi_watchdog
};
lmc_media_t lmc_t1_media = {
- lmc_t1_init, /* special media init stuff */
- lmc_t1_default, /* reset to default state */
- lmc_t1_set_status, /* reset status to state provided */
- lmc_t1_set_clock, /* set clock source */
- lmc_dummy_set2_1, /* set line speed */
- lmc_dummy_set_1, /* set cable length */
- lmc_dummy_set_1, /* set scrambler */
- lmc_t1_get_link_status, /* get link status */
- lmc_dummy_set_1, /* set link status */
- lmc_t1_set_crc_length, /* set CRC length */
- lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */
- lmc_t1_watchdog
+ .init = lmc_t1_init, /* special media init stuff */
+ .defaults = lmc_t1_default, /* reset to default state */
+ .set_status = lmc_t1_set_status, /* reset status to state provided */
+ .set_clock_source = lmc_t1_set_clock, /* set clock source */
+ .set_speed = lmc_dummy_set2_1, /* set line speed */
+ .set_cable_length = lmc_dummy_set_1, /* set cable length */
+ .set_scrambler = lmc_dummy_set_1, /* set scrambler */
+ .get_link_status = lmc_t1_get_link_status, /* get link status */
+ .set_link_status = lmc_dummy_set_1, /* set link status */
+ .set_crc_length = lmc_t1_set_crc_length, /* set CRC length */
+ .set_circuit_type = lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */
+ .watchdog = lmc_t1_watchdog
};
static void
--
2.7.4
--
Kees Cook
Nexus Security
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-12-17 16:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-17 0:59 [PATCH] WAN: use designated initializers Kees Cook
2016-12-17 16:57 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).