Re: [PATCH 6/6] wl1251: Set generated MAC address back to NVS data

["Pali Rohár" <pali.rohar@gmail.com>]

[-- Attachment #1: Type: Text/Plain, Size: 1277 bytes --]

On Saturday 24 December 2016 19:17:30 Pavel Machek wrote:
> Hi!
> 
> > In case there is no valid MAC address kernel generates random one.
> > This patch propagate this generated MAC address back to NVS data
> > which will be uploaded to wl1251 chip. So HW would have same MAC
> > address as linux kernel uses.
> > 
> >  	return 0;
> >  
> >  }
> > 
> > +static int wl1251_write_nvs_mac(struct wl1251 *wl)
> > +{
> 
> The name is quite confusing, this sounds like writing into
> non-volatile storage.
> 
> > +	int i;
> > +
> > +	if (wl->nvs_len < 0x24)
> > +		return -ENODATA;
> > +
> > +	/* length is 2 and data address is 0x546c (mask is 0xfffe) */
> 
> You don't actually check for the mask.

It is quite complicated. { 0x6d, 0x54 } (= 0x546d) in data represent 
address 0x546c and content are data. You need to apply mask 0xfffe for 
0x546d and you get address where data will be written (so 0x546c).

> > +	if (wl->nvs[0x19] != 2 || wl->nvs[0x1a] != 0x6d || wl->nvs[0x1b]
> > != 0x54) +		return -EINVAL;
> 
> You have two copies of these. Does it make sense to move it to helper
> function?

I'm thinking if checks is really needed. But probably moving it to 
separate function is good idea.

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]