[PATCH net 1/2] net: systemport: Utilize skb_put_padto()

[Florian Fainelli <f.fainelli@gmail.com>]

Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 25d1eb4933d0..e67908b5edfe 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1028,13 +1028,12 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	 * (including FCS and tag) because the length verification is done after
 	 * the Broadcom tag is stripped off the ingress packet.
 	 */
-	if (skb_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
+	if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
 		ret = NETDEV_TX_OK;
 		goto out;
 	}
 
-	skb_len = skb->len < ETH_ZLEN + ENET_BRCM_TAG_LEN ?
-			ETH_ZLEN + ENET_BRCM_TAG_LEN : skb->len;
+	skb_len = skb->len;
 
 	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
 	if (dma_mapping_error(kdev, mapping)) {
-- 
2.9.3