From: Alexander Duyck <alexander.duyck@gmail.com>
To: intel-wired-lan@lists.osuosl.org, jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Subject: [next PATCH 06/11] ixgbe: Use length to determine if descriptor is done
Date: Fri, 06 Jan 2017 08:07:13 -0800 [thread overview]
Message-ID: <20170106160711.1501.3612.stgit@localhost.localdomain> (raw)
In-Reply-To: <20170106155448.1501.31298.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This change makes it so that we use the length of the packet instead of the
DD status bit to determine if a new descriptor is ready to be processed.
The obvious advantage is that it cuts down on reads as we don't really even
need the DD bit if going from a 0 to a non-zero value on size is enough to
inform us that the packet has been completed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1b6f1f584044..6ce596816954 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1653,8 +1653,8 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
i -= rx_ring->count;
}
- /* clear the status bits for the next_to_use descriptor */
- rx_desc->wb.upper.status_error = 0;
+ /* clear the length for the next_to_use descriptor */
+ rx_desc->wb.upper.length = 0;
cleaned_count--;
} while (cleaned_count);
@@ -2170,7 +2170,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean);
- if (!rx_desc->wb.upper.status_error)
+ if (!rx_desc->wb.upper.length)
break;
/* This memory barrier is needed to keep us from reading
@@ -3749,6 +3749,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
struct ixgbe_ring *ring)
{
struct ixgbe_hw *hw = &adapter->hw;
+ union ixgbe_adv_rx_desc *rx_desc;
u64 rdba = ring->dma;
u32 rxdctl;
u8 reg_idx = ring->reg_idx;
@@ -3783,6 +3784,10 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
rxdctl |= 0x080420;
}
+ /* initialize Rx descriptor 0 */
+ rx_desc = IXGBE_RX_DESC(ring, 0);
+ rx_desc->wb.upper.length = 0;
+
/* enable receive descriptor ring */
rxdctl |= IXGBE_RXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
@@ -4998,9 +5003,6 @@ static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
memset(rx_ring->rx_buffer_info, 0, size);
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
rx_ring->next_to_alloc = 0;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
next prev parent reply other threads:[~2017-01-06 16:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-06 16:06 [next PATCH 00/11] ixgbe: Add support for writable pages and build_skb Alexander Duyck
2017-01-06 16:06 ` [next PATCH 01/11] ixgbe: Add function for checking to see if we can reuse page Alexander Duyck
2017-01-06 16:06 ` [next PATCH 02/11] ixgbe: Only DMA sync frame length Alexander Duyck
2017-01-06 16:06 ` [next PATCH 03/11] ixgbe: Update driver to make use of DMA attributes in Rx path Alexander Duyck
2017-01-06 16:06 ` [next PATCH 04/11] ixgbe: Update code to better handle incrementing page count Alexander Duyck
2017-01-07 13:06 ` kbuild test robot
2017-01-06 16:07 ` [next PATCH 05/11] ixgbe: Make use of order 1 pages and 3K buffers independent of FCoE Alexander Duyck
2017-01-06 16:07 ` Alexander Duyck [this message]
2017-01-06 16:07 ` [next PATCH 07/11] ixgbe: Break out Rx buffer page management Alexander Duyck
2017-01-06 16:07 ` [next PATCH 08/11] ixgbe: Add support for padding packet Alexander Duyck
2017-01-06 16:07 ` [next PATCH 09/11] ixgbe: Add private flag to control buffer mode Alexander Duyck
2017-01-06 16:07 ` [next PATCH 10/11] ixgbe: Add support for build_skb Alexander Duyck
2017-01-06 16:07 ` [next PATCH 11/11] ixgbe: Don't bother clearing buffer memory for descriptor rings Alexander Duyck
2017-01-06 21:41 ` [next PATCH 00/11] ixgbe: Add support for writable pages and build_skb David Miller
2017-01-07 1:12 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170106160711.1501.3612.stgit@localhost.localdomain \
--to=alexander.duyck@gmail.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).