[PATCH RESEND net-next 03/12] s390/qeth: display warning for OSA3 RX/TX checksum offloading

[Ursula Braun <ubraun@linux.vnet.ibm.com>]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

When RX/TX checksum offloading is turned on and the adapter is
an OSA 3 card in layer 3 mode, the checksum offloading is only
performed when both peers use different adapters. If both peers
share an OSA 3 card, communication is a memory copy and
checksum offloading is not performed.

This patch adds a warning to inform the administrator.

OSA 3 in layer 2 mode does not offer the RX/TX checksum
offload feature.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
---
 drivers/s390/net/qeth_core_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 49b813f..ca8309f 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -6116,6 +6116,11 @@ static int qeth_send_checksum_on(struct qeth_card *card, int cstype)
 		if ((required_features & chksum_cb.supported) !=
 		    required_features)
 			rc = -EIO;
+		else if (!(QETH_IPA_CHECKSUM_LP2LP & chksum_cb.supported) &&
+			 cstype == IPA_INBOUND_CHECKSUM)
+			dev_warn(&card->gdev->dev,
+				 "Hardware checksumming is performed only if %s and its peer use different OSA Express 3 ports\n",
+				 QETH_CARD_IFNAME(card));
 	}
 	if (rc) {
 		qeth_send_simple_setassparms(card, cstype, IPA_CMD_ASS_STOP, 0);
-- 
2.8.4