From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH] Documentation: devicetree: Add PHY no lane swap binding Date: Sat, 4 Feb 2017 18:23:29 +0100 Message-ID: <20170204172329.GA8364@lunn.ch> References: <1486223267-11875-1-git-send-email-lukma@denx.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Rob Herring , Mark Rutland , "David S. Miller" , Florian Fainelli , jbrunet , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= , Martin Blumenstingl , Jon Mason , Fabio Estevam To: Lukasz Majewski Return-path: Content-Disposition: inline In-Reply-To: <1486223267-11875-1-git-send-email-lukma-ynQEQJNshbs@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org On Sat, Feb 04, 2017 at 04:47:47PM +0100, Lukasz Majewski wrote: > Add the documentation to avoid PHY lane swapping. This is a boolean > entry to notify the phy device drivers that the TX/RX lanes NO need that the TX/RX lanes should not be swapped. > to be swapped. > The use case for this binding mostly happens after wrong HW > configuration of PHY IC during bootstrap. > > Signed-off-by: Lukasz Majewski > --- > Documentation/devicetree/bindings/net/phy.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt > index fb5056b..5e25bc9 100644 > --- a/Documentation/devicetree/bindings/net/phy.txt > +++ b/Documentation/devicetree/bindings/net/phy.txt > @@ -39,6 +39,10 @@ Optional Properties: > - enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to > compensate for the board being designed with the lanes swapped. > > +- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the > + TX/RX lanes. This binding allows the PHY to work correcly after e.g. wrong > + bootstrap configuration caused by issues in PCB layout design. > + We are leaving it undefined what it means if neither enet-phy-lane-no-swap nor enet-phy-lane-swap properties are present. Do we want to define this? That the swap should be left untouched by the driver? Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html