From: Petko Manolov <petkan@nucleusys.com>
To: Ben Hutchings <ben@decadent.org.uk>
Cc: netdev@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH net 2/4] rtl8150: Use heap buffers for all register access
Date: Mon, 6 Feb 2017 10:10:07 +0200 [thread overview]
Message-ID: <20170206081007.3isiato45t7fnzre@p310> (raw)
In-Reply-To: <20170204165631.GW3442@decadent.org.uk>
On 17-02-04 16:56:32, Ben Hutchings wrote:
> Allocating USB buffers on the stack is not portable, and no longer
> works on x86_64 (with VMAP_STACK enabled as per default).
>
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
> drivers/net/usb/rtl8150.c | 34 +++++++++++++++++++++++++++-------
> 1 file changed, 27 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> index 95b7bd0d7abc..c81c79110cef 100644
> --- a/drivers/net/usb/rtl8150.c
> +++ b/drivers/net/usb/rtl8150.c
> @@ -155,16 +155,36 @@ static const char driver_name [] = "rtl8150";
> */
> static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
> {
> - return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
> - RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
> - indx, 0, data, size, 500);
> + void *buf;
> + int ret;
> +
> + buf = kmalloc(size, GFP_NOIO);
> + if (!buf)
> + return -ENOMEM;
> +
> + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
> + RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
> + indx, 0, buf, size, 500);
> + if (ret > 0 && ret <= size)
> + memcpy(data, buf, ret);
> + kfree(buf);
> + return ret;
> }
>
> -static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
> +static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data)
> {
> - return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
> - RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
> - indx, 0, data, size, 500);
> + void *buf;
> + int ret;
> +
> + buf = kmemdup(data, size, GFP_NOIO);
> + if (!buf)
> + return -ENOMEM;
> +
> + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
> + RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
> + indx, 0, buf, size, 500);
> + kfree(buf);
> + return ret;
> }
>
> static void async_set_reg_cb(struct urb *urb)
>
ACK.
cheers,
Petko
next prev parent reply other threads:[~2017-02-06 8:54 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-04 16:54 [PATCH net 0/4] Fix on-stack USB buffers Ben Hutchings
2017-02-04 16:56 ` [PATCH net 1/4] pegasus: Use heap buffers for all register access Ben Hutchings
2017-02-05 0:30 ` Greg KH
2017-02-06 8:14 ` Petko Manolov
2017-02-06 8:28 ` Greg KH
2017-02-06 12:51 ` Petko Manolov
2017-02-06 13:21 ` Johan Hovold
2017-02-06 13:32 ` Johan Hovold
2017-02-06 13:46 ` Johan Hovold
2017-02-07 10:24 ` Petko Manolov
2017-02-07 10:45 ` Greg KH
[not found] ` <20170207104506.GB32583-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2017-02-07 12:50 ` Petko Manolov
2017-02-06 13:30 ` David Laight
2017-02-07 18:32 ` Steve Calfee
2017-02-08 7:57 ` Petko Manolov
2017-02-04 16:56 ` [PATCH net 2/4] rtl8150: " Ben Hutchings
2017-02-06 8:10 ` Petko Manolov [this message]
[not found] ` <20170204165631.GW3442-/+tVBieCtBitmTQ+vhA3Yw@public.gmane.org>
2017-02-06 16:09 ` David Laight
2017-02-06 16:25 ` Ben Hutchings
2017-02-07 10:34 ` Petko Manolov
2017-02-07 10:51 ` Greg KH
2017-02-07 11:56 ` David Laight
[not found] ` <063D6719AE5E284EB5DD2968C1650D6DB027DB75-VkEWCZq2GCInGFn1LkZF6NBPR1lH4CV8@public.gmane.org>
2017-02-07 12:42 ` 'Greg KH'
2017-02-07 12:53 ` Petko Manolov
2017-02-07 13:01 ` Greg KH
2017-02-07 13:20 ` Petko Manolov
2017-02-07 14:14 ` David Laight
2017-02-07 14:52 ` Petko Manolov
[not found] ` <20170204165451.GU3442-/+tVBieCtBitmTQ+vhA3Yw@public.gmane.org>
2017-02-04 16:56 ` [PATCH net 3/4] catc: Combine failure cleanup code in catc_probe() Ben Hutchings
2017-02-04 16:57 ` [PATCH net 4/4] catc: Use heap buffer for memory size test Ben Hutchings
2017-02-07 15:07 ` [PATCH net 0/4] Fix on-stack USB buffers David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170206081007.3isiato45t7fnzre@p310 \
--to=petkan@nucleusys.com \
--cc=ben@decadent.org.uk \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox