From: Anssi Hannula <anssi.hannula@bitwise.fi>
To: "David S . Miller" <davem@davemloft.net>
Cc: "Michal Simek" <michal.simek@xilinx.com>,
"Sören Brinkmann" <soren.brinkmann@xilinx.com>,
netdev@vger.kernel.org
Subject: [PATCH 1/2] net: xilinx_emaclite: fix receive buffer overflow
Date: Tue, 14 Feb 2017 19:11:44 +0200 [thread overview]
Message-ID: <20170214171145.26953-1-anssi.hannula@bitwise.fi> (raw)
xilinx_emaclite looks at the received data to try to determine the
Ethernet packet length but does not properly clamp it if
proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer
overflow and a panic via skb_panic() as the length exceeds the allocated
skb size.
Fix those cases.
Also add an additional unconditional check with WARN_ON() at the end.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index e3070fd8..bd6470f 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -369,7 +369,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
*
* Return: Total number of bytes received
*/
-static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
+static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
{
void __iomem *addr;
u16 length, proto_type;
@@ -409,7 +409,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
/* Check if received ethernet frame is a raw ethernet frame
* or an IP packet or an ARP packet */
- if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+ if (proto_type > ETH_DATA_LEN) {
if (proto_type == ETH_P_IP) {
length = ((ntohl(__raw_readl(addr +
@@ -417,6 +417,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
XEL_RXBUFF_OFFSET)) >>
XEL_HEADER_SHIFT) &
XEL_RPLR_LENGTH_MASK);
+ length = min_t(u16, length, ETH_DATA_LEN);
length += ETH_HLEN + ETH_FCS_LEN;
} else if (proto_type == ETH_P_ARP)
@@ -429,6 +430,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
/* Use the length in the frame, plus the header and trailer */
length = proto_type + ETH_HLEN + ETH_FCS_LEN;
+ if (WARN_ON(length > maxlen))
+ length = maxlen;
+
/* Read from the EmacLite device */
xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
data, length);
@@ -603,7 +607,7 @@ static void xemaclite_rx_handler(struct net_device *dev)
skb_reserve(skb, 2);
- len = xemaclite_recv_data(lp, (u8 *) skb->data);
+ len = xemaclite_recv_data(lp, (u8 *) skb->data, len);
if (!len) {
dev->stats.rx_errors++;
--
2.8.3
next reply other threads:[~2017-02-14 17:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-14 17:11 Anssi Hannula [this message]
2017-02-14 17:11 ` [PATCH 2/2] net: xilinx_emaclite: fix freezes due to unordered I/O Anssi Hannula
2017-02-15 17:19 ` David Miller
2017-02-14 20:12 ` [PATCH 1/2] net: xilinx_emaclite: fix receive buffer overflow David Miller
2017-02-15 8:28 ` Anssi Hannula
2017-02-15 15:31 ` David Laight
2017-02-15 17:19 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170214171145.26953-1-anssi.hannula@bitwise.fi \
--to=anssi.hannula@bitwise.fi \
--cc=davem@davemloft.net \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=soren.brinkmann@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).