From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: [PATCH 1/8] net: stmmac: remove useless parenthesis Date: Tue, 14 Feb 2017 20:54:34 +0100 Message-ID: <20170214195441.30425-2-clabbe.montjoie@gmail.com> References: <20170214195441.30425-1-clabbe.montjoie@gmail.com> Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Corentin Labbe To: peppe.cavallaro@st.com, alexandre.torgue@st.com Return-path: In-Reply-To: <20170214195441.30425-1-clabbe.montjoie@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org This patch remove some useless parenthesis. Signed-off-by: Corentin Labbe --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++---- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 7251871..ee1dbf4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -716,15 +716,15 @@ static void stmmac_adjust_link(struct net_device *dev) new_state = 1; switch (phydev->speed) { case 1000: - if (likely((priv->plat->has_gmac) || - (priv->plat->has_gmac4))) + if (likely(priv->plat->has_gmac || + priv->plat->has_gmac4)) ctrl &= ~priv->hw->link.port; stmmac_hw_fix_mac_speed(priv); break; case 100: case 10: - if (likely((priv->plat->has_gmac) || - (priv->plat->has_gmac4))) { + if (likely(priv->plat->has_gmac || + priv->plat->has_gmac4)) { ctrl |= priv->hw->link.port; if (phydev->speed == SPEED_100) { ctrl |= priv->hw->link.speed; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index d9893cf..a695773 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -257,7 +257,7 @@ int stmmac_mdio_register(struct net_device *ndev) * If an IRQ was provided to be assigned after * the bus probe, do it here. */ - if ((!mdio_bus_data->irqs) && + if (!mdio_bus_data->irqs && (mdio_bus_data->probed_phy_irq > 0)) { new_bus->irq[addr] = mdio_bus_data->probed_phy_irq; -- 2.10.2