From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: Re: [PATCH 04/21] ARM: sun8i: dt: Add DT bindings documentation for Allwinner dwmac-sun8i Date: Fri, 17 Feb 2017 13:18:39 +0100 Message-ID: <20170217121839.GA24993@Red> References: <20170216124859.14346-1-clabbe.montjoie@gmail.com> <20170216124859.14346-5-clabbe.montjoie@gmail.com> <20170216184818.hwexzuqacbemsxo7@lukather> Reply-To: clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Cc: peppe.cavallaro-qxv4g6HH51o@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, alexandre.torgue-qxv4g6HH51o@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org To: Maxime Ripard Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <20170216184818.hwexzuqacbemsxo7@lukather> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , List-Id: netdev.vger.kernel.org On Thu, Feb 16, 2017 at 07:48:18PM +0100, Maxime Ripard wrote: > Hi, > > On Thu, Feb 16, 2017 at 01:48:42PM +0100, Corentin Labbe wrote: > > This patch adds documentation for Device-Tree bindings for the > > Allwinner dwmac-sun8i driver. > > > > Signed-off-by: Corentin Labbe > > --- > > .../devicetree/bindings/net/dwmac-sun8i.txt | 86 ++++++++++++++++++++++ > > 1 file changed, 86 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt > > > > diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt > > new file mode 100644 > > index 0000000..ac806c6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt > > @@ -0,0 +1,86 @@ > > +* Allwinner sun8i GMAC ethernet controller > > + > > +This device is a platform glue layer for stmmac. > > +Please see stmmac.txt for the other unchanged properties. > > + > > +Required properties: > > +- compatible: should be one of the following string: > > + "allwinner,sun8i-a83t-emac" > > + "allwinner,sun8i-h3-emac" > > + "allwinner,sun50i-a64-emac" > > +- reg: address and length of the register for the device. > > +- interrupts: interrupt for the device > > +- interrupt-names: should be "macirq" > > +- clocks: A phandle to the reference clock for this device > > +- clock-names: should be "stmmaceth" > > +- resets: A phandle to the reset control for this device > > +- reset-names: should be "stmmaceth" > > +- phy-mode: See ethernet.txt > > +- phy-handle: See ethernet.txt > > +- #address-cells: shall be 1 > > +- #size-cells: shall be 0 > > +- syscon: A phandle to the syscon of the SoC with one of the following > > + compatible string: > > + - allwinner,sun8i-h3-system-controller > > + - allwinner,sun8i-a64-system-controller > > + - allwinner,sun8i-a83t-system-controller > > + > > +Optional properties: > > +- allwinner,tx-delay: TX clock delay chain value. Range value is 0-0x07. Default is 0) > > +- allwinner,rx-delay: RX clock delay chain value. Range value is 0-0x1F. Default is 0) > > +Both delay properties does not have units, there are arbitrary value. > > +The TX/RX clock delay chain settings are board specific and could be found > > +in vendor FEX files. > > + > > +Optional properties for "allwinner,sun8i-h3-emac": > > +- allwinner,leds-active-low: EPHY LEDs are active low > > + > > +Required child node of emac: > > +- mdio bus node: should be named mdio > > + > > +Required properties of the mdio node: > > +- #address-cells: shall be 1 > > +- #size-cells: shall be 0 > > + > > +The device node referenced by "phy" or "phy-handle" should be a child node > > +of the mdio node. See phy.txt for the generic PHY bindings. > > + > > +Required properties of the phy node with "allwinner,sun8i-h3-emac": > > +- clocks: an extra phandle to the reference clock for the EPHY > > +- resets: an extra phandle to the reset control for the EPHY > > + > > +Required properties for the system controller: > > +- reg: address and length of the register for the device. > > +- compatible: should be "syscon" and one of the following string: > > + "allwinner,sun8i-h3-system-controller" > > + "allwinner,sun8i-a64-system-controller" > > + "allwinner,sun8i-a83t-system-controller" > > This should be in a separate binding document. > > What does it describe / represent? > > Thanks, > Maxime > I agree, I will split it in two one for syscon, one for emac Thanks Corentin Labbe