From: Petko Manolov <petkan@nucleusys.com>
To: Philippe Reynes <tremyfr@gmail.com>
Cc: davem@davemloft.net, linux-usb@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] net: usb: rtl8150: use new api ethtool_{get|set}_link_ksettings
Date: Mon, 13 Mar 2017 17:00:20 +0200 [thread overview]
Message-ID: <20170313150020.25ibsslebcscmngb@p310> (raw)
In-Reply-To: <1489356985-24117-1-git-send-email-tremyfr@gmail.com>
On 17-03-12 23:16:25, Philippe Reynes wrote:
> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> As I don't have the hardware, I'd be very pleased if someone may test this
> patch.
I've got some old adapters around and will drop you a line when i test the
patch.
Petko
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
> ---
> drivers/net/usb/rtl8150.c | 35 ++++++++++++++++++++---------------
> 1 files changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> index c81c791..daaa88a 100644
> --- a/drivers/net/usb/rtl8150.c
> +++ b/drivers/net/usb/rtl8150.c
> @@ -791,47 +791,52 @@ static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinf
> usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
> }
>
> -static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
> +static int rtl8150_get_link_ksettings(struct net_device *netdev,
> + struct ethtool_link_ksettings *ecmd)
> {
> rtl8150_t *dev = netdev_priv(netdev);
> short lpa, bmcr;
> + u32 supported;
>
> - ecmd->supported = (SUPPORTED_10baseT_Half |
> + supported = (SUPPORTED_10baseT_Half |
> SUPPORTED_10baseT_Full |
> SUPPORTED_100baseT_Half |
> SUPPORTED_100baseT_Full |
> SUPPORTED_Autoneg |
> SUPPORTED_TP | SUPPORTED_MII);
> - ecmd->port = PORT_TP;
> - ecmd->transceiver = XCVR_INTERNAL;
> - ecmd->phy_address = dev->phy;
> + ecmd->base.port = PORT_TP;
> + ecmd->base.phy_address = dev->phy;
> get_registers(dev, BMCR, 2, &bmcr);
> get_registers(dev, ANLP, 2, &lpa);
> if (bmcr & BMCR_ANENABLE) {
> u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
> SPEED_100 : SPEED_10);
> - ethtool_cmd_speed_set(ecmd, speed);
> - ecmd->autoneg = AUTONEG_ENABLE;
> + ecmd->base.speed = speed;
> + ecmd->base.autoneg = AUTONEG_ENABLE;
> if (speed == SPEED_100)
> - ecmd->duplex = (lpa & LPA_100FULL) ?
> + ecmd->base.duplex = (lpa & LPA_100FULL) ?
> DUPLEX_FULL : DUPLEX_HALF;
> else
> - ecmd->duplex = (lpa & LPA_10FULL) ?
> + ecmd->base.duplex = (lpa & LPA_10FULL) ?
> DUPLEX_FULL : DUPLEX_HALF;
> } else {
> - ecmd->autoneg = AUTONEG_DISABLE;
> - ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
> - SPEED_100 : SPEED_10));
> - ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
> + ecmd->base.autoneg = AUTONEG_DISABLE;
> + ecmd->base.speed = ((bmcr & BMCR_SPEED100) ?
> + SPEED_100 : SPEED_10);
> + ecmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
> DUPLEX_FULL : DUPLEX_HALF;
> }
> +
> + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
> + supported);
> +
> return 0;
> }
>
> static const struct ethtool_ops ops = {
> .get_drvinfo = rtl8150_get_drvinfo,
> - .get_settings = rtl8150_get_settings,
> - .get_link = ethtool_op_get_link
> + .get_link = ethtool_op_get_link,
> + .get_link_ksettings = rtl8150_get_link_ksettings,
> };
>
> static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
> --
> 1.7.4.4
>
>
next prev parent reply other threads:[~2017-03-13 15:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-12 22:16 [PATCH] net: usb: rtl8150: use new api ethtool_{get|set}_link_ksettings Philippe Reynes
2017-03-13 15:00 ` Petko Manolov [this message]
2017-03-14 17:12 ` Petko Manolov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170313150020.25ibsslebcscmngb@p310 \
--to=petkan@nucleusys.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tremyfr@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).