From: Ursula Braun <ubraun@linux.vnet.ibm.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-s390@vger.kernel.org,
jwi@linux.vnet.ibm.com, schwidefsky@de.ibm.com,
heiko.carstens@de.ibm.com, raspl@linux.vnet.ibm.com,
ubraun@linux.vnet.ibm.com
Subject: [PATCH net 2/3] s390/qeth: no ETH header for outbound AF_IUCV
Date: Thu, 23 Mar 2017 14:55:09 +0100 [thread overview]
Message-ID: <20170323135510.98972-3-ubraun@linux.vnet.ibm.com> (raw)
In-Reply-To: <20170323135510.98972-1-ubraun@linux.vnet.ibm.com>
From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte
slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr()
fills this ETH header... and then immediately moves it to the
skb's headroom, where it disappears and is never seen again.
But it's still possible for us to return NETDEV_TX_BUSY after the skb has
been modified. Since we didn't get a private copy of the skb, the next
time the skb is delivered to hard_start_xmit() it no longer has the
expected layout (we moved the ETH header to the headroom, so skb->data
now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr()
does another round of rebuilding, the resulting qeth header ends up
all wrong. On transmission, the buffer is then rejected by
the HiperSockets device with SBALF15 = x'04'.
When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it
tears down the offending socket.
As the ETH header for AF_IUCV serves no purpose, just align the code to
what we do for IP traffic on L3 HiperSockets: keep the ETH header at
skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer().
When mapping the payload into the SBAL elements, the ETH header is then
stripped off. This avoids the skb manipulations in
qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit()
after NETDEV_TX_BUSY is now processed properly.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
---
drivers/s390/net/qeth_l3_main.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 72aa953..653f0fb 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2609,17 +2609,13 @@ static void qeth_l3_fill_af_iucv_hdr(struct qeth_card *card,
char daddr[16];
struct af_iucv_trans_hdr *iucv_hdr;
- skb_pull(skb, 14);
- card->dev->header_ops->create(skb, card->dev, 0,
- card->dev->dev_addr, card->dev->dev_addr,
- card->dev->addr_len);
- skb_pull(skb, 14);
- iucv_hdr = (struct af_iucv_trans_hdr *)skb->data;
memset(hdr, 0, sizeof(struct qeth_hdr));
hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3;
hdr->hdr.l3.ext_flags = 0;
- hdr->hdr.l3.length = skb->len;
+ hdr->hdr.l3.length = skb->len - ETH_HLEN;
hdr->hdr.l3.flags = QETH_HDR_IPV6 | QETH_CAST_UNICAST;
+
+ iucv_hdr = (struct af_iucv_trans_hdr *) (skb->data + ETH_HLEN);
memset(daddr, 0, sizeof(daddr));
daddr[0] = 0xfe;
daddr[1] = 0x80;
@@ -2823,10 +2819,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
if ((card->info.type == QETH_CARD_TYPE_IQD) &&
!skb_is_nonlinear(skb)) {
new_skb = skb;
- if (new_skb->protocol == ETH_P_AF_IUCV)
- data_offset = 0;
- else
- data_offset = ETH_HLEN;
+ data_offset = ETH_HLEN;
hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
if (!hdr)
goto tx_drop;
--
2.8.4
next prev parent reply other threads:[~2017-03-23 13:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-23 13:55 [PATCH net 0/3] s390/qeth patches for net Ursula Braun
2017-03-23 13:55 ` [PATCH net 1/3] s390/qeth: size calculation outbound buffers Ursula Braun
2017-03-23 13:55 ` Ursula Braun [this message]
2017-03-23 13:55 ` [PATCH net 3/3] MAINTAINERS: add Julian Wiedmann Ursula Braun
2017-03-24 19:40 ` [PATCH net 0/3] s390/qeth patches for net David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170323135510.98972-3-ubraun@linux.vnet.ibm.com \
--to=ubraun@linux.vnet.ibm.com \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=jwi@linux.vnet.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=raspl@linux.vnet.ibm.com \
--cc=schwidefsky@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).