netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Lauro Ramos Venancio <lauro.venancio@openbossa.org>,
	Aloisio Almeida Jr <aloisio.almeida@openbossa.org>,
	Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: [PATCH v2 8/8] NFC: nfcmrvl: allow gpio 0 for reset signalling
Date: Thu, 30 Mar 2017 12:15:42 +0200	[thread overview]
Message-ID: <20170330101542.15384-9-johan@kernel.org> (raw)
In-Reply-To: <20170330101542.15384-1-johan@kernel.org>

Allow gpio 0 to be used for reset signalling, and instead use negative
errnos to disable the reset functionality.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/nfc/nfcmrvl/main.c            | 9 ++++-----
 include/linux/platform_data/nfcmrvl.h | 2 +-
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index a446590a71ca..838627fa82ee 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -123,12 +123,12 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
 
 	memcpy(&priv->config, pdata, sizeof(*pdata));
 
-	if (priv->config.reset_n_io) {
+	if (gpio_is_valid(priv->config.reset_n_io)) {
 		rc = gpio_request_one(priv->config.reset_n_io,
 				      GPIOF_OUT_INIT_LOW,
 				      "nfcmrvl_reset_n");
 		if (rc < 0) {
-			priv->config.reset_n_io = 0;
+			priv->config.reset_n_io = -EINVAL;
 			nfc_err(dev, "failed to request reset_n io\n");
 		}
 	}
@@ -183,7 +183,7 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
 error_free_dev:
 	nci_free_device(priv->ndev);
 error_free_gpio:
-	if (priv->config.reset_n_io)
+	if (gpio_is_valid(priv->config.reset_n_io))
 		gpio_free(priv->config.reset_n_io);
 	kfree(priv);
 	return ERR_PTR(rc);
@@ -199,7 +199,7 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv)
 
 	nfcmrvl_fw_dnld_deinit(priv);
 
-	if (priv->config.reset_n_io)
+	if (gpio_is_valid(priv->config.reset_n_io))
 		gpio_free(priv->config.reset_n_io);
 
 	nci_unregister_device(ndev);
@@ -267,7 +267,6 @@ int nfcmrvl_parse_dt(struct device_node *node,
 	reset_n_io = of_get_named_gpio(node, "reset-n-io", 0);
 	if (reset_n_io < 0) {
 		pr_info("no reset-n-io config\n");
-		reset_n_io = 0;
 	} else if (!gpio_is_valid(reset_n_io)) {
 		pr_err("invalid reset-n-io GPIO\n");
 		return reset_n_io;
diff --git a/include/linux/platform_data/nfcmrvl.h b/include/linux/platform_data/nfcmrvl.h
index a6f9d633f5be..9e75ac8d19be 100644
--- a/include/linux/platform_data/nfcmrvl.h
+++ b/include/linux/platform_data/nfcmrvl.h
@@ -23,7 +23,7 @@ struct nfcmrvl_platform_data {
 	 */
 
 	/* GPIO that is wired to RESET_N signal */
-	unsigned int reset_n_io;
+	int reset_n_io;
 	/* Tell if transport is muxed in HCI one */
 	unsigned int hci_muxed;
 
-- 
2.12.2

  parent reply	other threads:[~2017-03-30 10:15 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-30 10:15 [PATCH v2 0/8] NFC: fix device allocation and nfcmrvl crashes Johan Hovold
2017-03-30 10:15 ` [PATCH v2 1/8] NFC: fix broken device allocation Johan Hovold
2017-03-30 10:15 ` [PATCH v2 2/8] NFC: nfcmrvl_uart: add missing tty-device sanity check Johan Hovold
2017-03-30 10:15 ` [PATCH v2 3/8] NFC: nfcmrvl: do not use device-managed resources Johan Hovold
2017-03-30 10:15 ` [PATCH v2 4/8] NFC: nfcmrvl: use nfc-device for firmware download Johan Hovold
     [not found] ` <20170330101542.15384-1-johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-03-30 10:15   ` [PATCH v2 5/8] NFC: nfcmrvl: fix firmware-management initialisation Johan Hovold
2017-03-30 10:15 ` [PATCH v2 6/8] NFC: nfcmrvl_uart: fix device-node leak during probe Johan Hovold
2017-03-30 10:15 ` [PATCH v2 7/8] NFC: nfcmrvl_usb: use interface as phy device Johan Hovold
2017-03-30 10:15 ` Johan Hovold [this message]
2017-04-18 10:09 ` [PATCH v2 0/8] NFC: fix device allocation and nfcmrvl crashes Johan Hovold
2017-04-18 23:24   ` Samuel Ortiz
2017-04-26 10:36     ` Johan Hovold
2017-04-26 22:42 ` Samuel Ortiz
2017-05-16  9:42   ` Johan Hovold
2017-06-01  7:55     ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170330101542.15384-9-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=aloisio.almeida@openbossa.org \
    --cc=lauro.venancio@openbossa.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).