From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH v2] selftests: add a generic testsuite for ethernet device Date: Tue, 4 Apr 2017 16:24:54 +0200 Message-ID: <20170404142454.GC1736@lunn.ch> References: <20170404133247.28725-1-clabbe.montjoie@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: shuah@kernel.org, davem@davemloft.net, linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org To: Corentin Labbe Return-path: Received: from vps0.lunn.ch ([178.209.37.122]:45193 "EHLO vps0.lunn.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754339AbdDDOZG (ORCPT ); Tue, 4 Apr 2017 10:25:06 -0400 Content-Disposition: inline In-Reply-To: <20170404133247.28725-1-clabbe.montjoie@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: On Tue, Apr 04, 2017 at 03:32:47PM +0200, Corentin Labbe wrote: > This patch add a generic testsuite for testing ethernet network device driver. # ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAUL0 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc mq state UP mode DEFA2 link/ether 94:10:3e:80:bc:f3 brd ff:ff:ff:ff:ff:ff 3: eth1: mtu 1500 qdisc mq state UP mode DEFA2 link/ether a2:e2:da:92:7e:8c brd ff:ff:ff:ff:ff:ff 4: sit0@NONE: mtu 1480 qdisc noop state DOWN mode DEFAULT group default0 link/sit 0.0.0.0 brd 0.0.0.0 5: lan4@eth0: mtu 1500 qdisc noqueue state 0 link/ether 94:10:3e:80:bc:f3 brd ff:ff:ff:ff:ff:ff 6: lan3@eth0: mtu 1500 qdisc noop state DOWN mode DEFAULT0 link/ether 94:10:3e:80:bc:f3 brd ff:ff:ff:ff:ff:ff 7: lan2@eth0: mtu 1500 qdisc noqueue state 0 link/ether 94:10:3e:80:bc:f3 brd ff:ff:ff:ff:ff:ff 8: lan1@eth0: mtu 1500 qdisc noqueue state UP0 link/ether 94:10:3e:80:bc:f3 brd ff:ff:ff:ff:ff:ff 9: internet@eth0: mtu 1500 qdisc noqueue st0 link/ether 94:10:3e:80:bc:f3 brd ff:ff:ff:ff:ff:ff # /home/andrew/netdevice.sh [ 151.417351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready PASS: eth0: set interface up PASS: eth0: set MAC address SKIP: eth0: set IP address PASS: eth0: ethtool list features Cannot get register dump: Operation not supported SKIP: eth0: ethtool dump not supported PASS: eth0: ethtool stats PASS: eth0: stop interface SKIP: eth1: interface already up PASS: eth1: ethtool list features Cannot get register dump: Operation not supported SKIP: eth1: ethtool dump not supported PASS: eth1: ethtool stats SKIP: eth1: interface kept up PASS: eth0: set interface up PASS: lan4: set MAC address inet 192.168.13.2/24 brd 192.168.13.255 scope global lan4 SKIP: lan4: already have an IP PASS: lan4: ethtool list features PASS: lan4: ethtool dump PASS: lan4: ethtool stats PASS: eth0: stop interface PASS: eth0: set interface up PASS: lan3: set MAC address SKIP: lan3: set IP address PASS: lan3: ethtool list features PASS: lan3: ethtool dump PASS: lan3: ethtool stats PASS: eth0: stop interface PASS: eth0: set interface up PASS: lan2: set MAC address SKIP: lan2: set IP address PASS: lan2: ethtool list features PASS: lan2: ethtool dump PASS: lan2: ethtool stats PASS: eth0: stop interface PASS: eth0: set interface up PASS: lan1: set MAC address inet 10.0.0.12/24 brd 10.0.0.255 scope global lan1 SKIP: lan1: already have an IP PASS: lan1: ethtool list features PASS: lan1: ethtool dump PASS: lan1: ethtool stats PASS: eth0: stop interface PASS: eth0: set interface up PASS: internet: set MAC address inet 192.168.10.2/24 brd 192.168.10.255 scope global internet SKIP: internet: already have an IP PASS: internet: ethtool list features PASS: internet: ethtool dump PASS: internet: ethtool stats PASS: eth0: stop interface Cool Tested-by: Andrew Lunn Andrew