[PATCH net-next 06/11] ibmvnic: Clean up tx pools when closing

[Nathan Fontenot <nfont@linux.vnet.ibm.com>]

When closing the bimvnic driver, most notably during the reset
path, the tx pools need to be cleaned to ensure there are no
hanging skbs that need to be free'ed.

The need to do this was found during debugging a loss of network
traffic after handling a driver reset. The underlying cause was
some skbs that were in the tx pool that were never free'ed. As a
result the upper network layers never tried a re-send since it
believed the driver still had the skb.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
---
 drivers/net/ethernet/ibm/ibmvnic.c |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index d20d884..0400ae7 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -760,6 +760,34 @@ static void disable_sub_crqs(struct ibmvnic_adapter *adapter)
 	}
 }
 
+static void clean_tx_pools(struct ibmvnic_adapter *adapter)
+{
+	struct ibmvnic_tx_pool *tx_pool;
+	u64 tx_entries;
+	int tx_scrqs;
+	int i, j;
+
+	if (!adapter->tx_pool)
+		return;
+
+	tx_scrqs = be32_to_cpu(adapter->login_rsp_buf->num_txsubm_subcrqs);
+	tx_entries = adapter->req_tx_entries_per_subcrq;
+
+	/* Free any remaining skbs in the tx buffer pools */
+	for (i = 0; i < tx_scrqs; i++) {
+		tx_pool = &adapter->tx_pool[i];
+		if (!tx_pool)
+			continue;
+
+		for (j = 0; j < tx_entries; j++) {
+			if (tx_pool->tx_buff[j].skb) {
+				dev_kfree_skb_any(tx_pool->tx_buff[j].skb);
+				tx_pool->tx_buff[j].skb = NULL;
+			}
+		}
+	}
+}
+
 static int __ibmvnic_close(struct net_device *netdev)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
@@ -768,6 +796,8 @@ static int __ibmvnic_close(struct net_device *netdev)
 
 	adapter->state = VNIC_CLOSING;
 	netif_tx_stop_all_queues(netdev);
+
+	clean_tx_pools(adapter);
 	disable_sub_crqs(adapter);
 
 	if (adapter->napi) {