netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarod Wilson <jarod@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jarod Wilson <jarod@redhat.com>,
	Jay Vosburgh <j.vosburgh@gmail.com>,
	Veaceslav Falico <vfalico@gmail.com>,
	Andy Gospodarek <andy@greyhouse.net>,
	netdev@vger.kernel.org
Subject: [PATCH net v2] bonding: fix accounting of active ports in 3ad
Date: Fri, 19 May 2017 19:43:45 -0400	[thread overview]
Message-ID: <20170519234345.44721-1-jarod@redhat.com> (raw)
In-Reply-To: <20170517151144.57865-1-jarod@redhat.com>

As of 7bb11dc9f59d and 0622cab0341c, bond slaves in a 3ad bond are not
removed from the aggregator when they are down, and the active slave count
is NOT equal to number of ports in the aggregator, but rather the number
of ports in the aggregator that are still enabled. The sysfs spew for
bonding_show_ad_num_ports() has a comment that says "Show number of active
802.3ad ports.", but it's currently showing total number of ports, both
active and inactive. Remedy it by using the same logic introduced in
0622cab0341c in __bond_3ad_get_active_agg_info(), so sysfs, procfs and
netlink all report the number of active ports. Note that this means that
IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of
NUM_PORTS, and thus perhaps should be renamed for clarity.

Lightly tested on a dual i40e lacp bond, simulating link downs with an ip
link set dev <slave2> down, was able to produce the state where I could
see both in the same aggregator, but a number of ports count of 1.

MII Status: up
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 2 <---
Slave Interface: ens10
MII Status: up <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1

MII Status: up
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 1 <---
Slave Interface: ens10
MII Status: down <---
Aggregator ID: 1
Slave Interface: ens11
MII Status: up
Aggregator ID: 1

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
v2: fix incorrect git sha reference, add more testing data

 drivers/net/bonding/bond_3ad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index c5fd4259da33..b44a6aeb346d 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2577,7 +2577,7 @@ int __bond_3ad_get_active_agg_info(struct bonding *bond,
 		return -1;
 
 	ad_info->aggregator_id = aggregator->aggregator_identifier;
-	ad_info->ports = aggregator->num_of_ports;
+	ad_info->ports = __agg_active_ports(aggregator);
 	ad_info->actor_key = aggregator->actor_oper_aggregator_key;
 	ad_info->partner_key = aggregator->partner_oper_aggregator_key;
 	ether_addr_copy(ad_info->partner_system,
-- 
2.12.1

  parent reply	other threads:[~2017-05-19 23:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-17 15:11 [PATCH net] bonding: fix accounting of active ports in 3ad Jarod Wilson
2017-05-19 21:14 ` David Miller
2017-05-19 22:15   ` Jarod Wilson
2017-05-19 23:17     ` David Miller
2017-05-19 23:43 ` Jarod Wilson [this message]
2017-05-22 16:06   ` [PATCH net v2] " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170519234345.44721-1-jarod@redhat.com \
    --to=jarod@redhat.com \
    --cc=andy@greyhouse.net \
    --cc=j.vosburgh@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vfalico@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).