[PATCH v3 0/5] net-next: stmmac: rework the speed selection

[PATCH v3 0/5] net-next: stmmac: rework the speed selection

[Corentin Labbe]

Hello

The current stmmac_adjust_link() part which handle speed have
some if (has_platform) code and my dwmac-sun8i will add more of them.

So we need to handle better speed selection.
Moreover the struct link member speed and port are hard to guess their
purpose. And their unique usage are to be combined for writing speed.

My first try was to create an adjust_link() in stmmac_ops but it duplicate some code

The current solution is to have direct value for 10/100/1000 and a mask for them.

The first 4 patchs fix some minor problem found in stmmac_adjust_link() and reported by Florian Fainelli in my previous serie.
The last patch is the real work.

This serie is tested on cubieboard2 (dwmac1000) and opipc (dwmac-sun8i).

Regards

Changes since v3:
- Added the patch #4 "Convert old_link to bool" as suggested by Joe Perches
- Changed the speedmask

Changes since v2:
- Use true/false for new_state in patch #1

Corentin Labbe (5):
  net: stmmac: Convert new_state to bool
  net: stmmac: Remove unnecessary parenthesis
  net: stmmac: use SPEED_xxx instead of raw value
  net: stmmac: Convert old_link to bool
  net: stmmac: rework the speed selection

 drivers/net/ethernet/stmicro/stmmac/common.h       |  8 ++--
 .../net/ethernet/stmicro/stmmac/dwmac1000_core.c   | 26 +++++++-----
 .../net/ethernet/stmicro/stmmac/dwmac100_core.c    |  6 ++-
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  | 26 +++++++-----
 drivers/net/ethernet/stmicro/stmmac/stmmac.h       |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 47 ++++++++--------------
 6 files changed, 57 insertions(+), 58 deletions(-)

-- 
2.13.0

[PATCH v3 1/5] net-next: stmmac: Convert new_state to bool

[Corentin Labbe]

This patch convert new_state from int to bool since it store only 1 or 0

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b77a56b6ab70..9579592b6b6f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -786,7 +786,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev = dev->phydev;
 	unsigned long flags;
-	int new_state = 0;
+	bool new_state = false;
 
 	if (!phydev)
 		return;
@@ -799,7 +799,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 		/* Now we make sure that we can be in full duplex mode.
 		 * If not, we operate in half-duplex mode. */
 		if (phydev->duplex != priv->oldduplex) {
-			new_state = 1;
+			new_state = true;
 			if (!(phydev->duplex))
 				ctrl &= ~priv->hw->link.duplex;
 			else
@@ -811,7 +811,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 			stmmac_mac_flow_ctrl(priv, phydev->duplex);
 
 		if (phydev->speed != priv->speed) {
-			new_state = 1;
+			new_state = true;
 			switch (phydev->speed) {
 			case 1000:
 				if (priv->plat->has_gmac ||
@@ -850,11 +850,11 @@ static void stmmac_adjust_link(struct net_device *dev)
 		writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
 
 		if (!priv->oldlink) {
-			new_state = 1;
+			new_state = true;
 			priv->oldlink = 1;
 		}
 	} else if (priv->oldlink) {
-		new_state = 1;
+		new_state = true;
 		priv->oldlink = 0;
 		priv->speed = SPEED_UNKNOWN;
 		priv->oldduplex = DUPLEX_UNKNOWN;
-- 
2.13.0

[PATCH v3 2/5] net-next: stmmac: Remove unnecessary parenthesis

[Corentin Labbe]

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9579592b6b6f..1fb46c124ab1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -800,7 +800,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 		 * If not, we operate in half-duplex mode. */
 		if (phydev->duplex != priv->oldduplex) {
 			new_state = true;
-			if (!(phydev->duplex))
+			if (!phydev->duplex)
 				ctrl &= ~priv->hw->link.duplex;
 			else
 				ctrl |= priv->hw->link.duplex;
-- 
2.13.0

[PATCH v3 3/5] net-next: stmmac: use SPEED_xxx instead of raw value

[Corentin Labbe]

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1fb46c124ab1..5643a5c916b6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -813,12 +813,12 @@ static void stmmac_adjust_link(struct net_device *dev)
 		if (phydev->speed != priv->speed) {
 			new_state = true;
 			switch (phydev->speed) {
-			case 1000:
+			case SPEED_1000:
 				if (priv->plat->has_gmac ||
 				    priv->plat->has_gmac4)
 					ctrl &= ~priv->hw->link.port;
 				break;
-			case 100:
+			case SPEED_100:
 				if (priv->plat->has_gmac ||
 				    priv->plat->has_gmac4) {
 					ctrl |= priv->hw->link.port;
@@ -827,7 +827,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 					ctrl &= ~priv->hw->link.port;
 				}
 				break;
-			case 10:
+			case SPEED_10:
 				if (priv->plat->has_gmac ||
 				    priv->plat->has_gmac4) {
 					ctrl |= priv->hw->link.port;
-- 
2.13.0

[PATCH v3 4/5] net-next: stmmac: Convert old_link to bool

[Corentin Labbe]

This patch convert old_link from int to bool since it store only 1 or 0

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 33efe7038cab..a916e13624eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -104,7 +104,7 @@ struct stmmac_priv {
 	/* TX Queue */
 	struct stmmac_tx_queue tx_queue[MTL_MAX_TX_QUEUES];
 
-	int oldlink;
+	bool oldlink;
 	int speed;
 	int oldduplex;
 	unsigned int flow_ctrl;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5643a5c916b6..4bd83a29cbd5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -851,11 +851,11 @@ static void stmmac_adjust_link(struct net_device *dev)
 
 		if (!priv->oldlink) {
 			new_state = true;
-			priv->oldlink = 1;
+			priv->oldlink = true;
 		}
 	} else if (priv->oldlink) {
 		new_state = true;
-		priv->oldlink = 0;
+		priv->oldlink = false;
 		priv->speed = SPEED_UNKNOWN;
 		priv->oldduplex = DUPLEX_UNKNOWN;
 	}
@@ -918,7 +918,7 @@ static int stmmac_init_phy(struct net_device *dev)
 	char bus_id[MII_BUS_ID_SIZE];
 	int interface = priv->plat->interface;
 	int max_speed = priv->plat->max_speed;
-	priv->oldlink = 0;
+	priv->oldlink = false;
 	priv->speed = SPEED_UNKNOWN;
 	priv->oldduplex = DUPLEX_UNKNOWN;
 
@@ -4308,7 +4308,7 @@ int stmmac_suspend(struct device *dev)
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	priv->oldlink = 0;
+	priv->oldlink = false;
 	priv->speed = SPEED_UNKNOWN;
 	priv->oldduplex = DUPLEX_UNKNOWN;
 	return 0;
-- 
2.13.0

[PATCH v3 5/5] net-next: stmmac: rework the speed selection

[Corentin Labbe]

The current stmmac_adjust_link() part which handle speed have
some if (has_platform) code and my dwmac-sun8i will add more of them.

So we need to handle better speed selection.
Moreover the struct link member speed and port are hard to guess their
purpose. And their unique usage are to be combined for writing speed.

So this patch replace speed/port by simpler
speed10/speed100/speed1000/speed_mask variables.

In dwmac4_core_init and dwmac1000_core_init, port/speed value was used
directly without using the struct link. This patch convert also their
usage to speedxxx.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/common.h       |  8 ++++---
 .../net/ethernet/stmicro/stmmac/dwmac1000_core.c   | 26 +++++++++++++---------
 .../net/ethernet/stmicro/stmmac/dwmac100_core.c    |  6 +++--
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  | 26 +++++++++++++---------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 21 ++++-------------
 5 files changed, 43 insertions(+), 44 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index b7ce3fbb5375..e82b4b70b7be 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -549,9 +549,11 @@ extern const struct stmmac_hwtimestamp stmmac_ptp;
 extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
 
 struct mac_link {
-	int port;
-	int duplex;
-	int speed;
+	u32 speed_mask;
+	u32 speed10;
+	u32 speed100;
+	u32 speed1000;
+	u32 duplex;
 };
 
 struct mii_regs {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index f3d9305e5f70..8a86340ff2d3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -45,15 +45,17 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu)
 	if (hw->ps) {
 		value |= GMAC_CONTROL_TE;
 
-		if (hw->ps == SPEED_1000) {
-			value &= ~GMAC_CONTROL_PS;
-		} else {
-			value |= GMAC_CONTROL_PS;
-
-			if (hw->ps == SPEED_10)
-				value &= ~GMAC_CONTROL_FES;
-			else
-				value |= GMAC_CONTROL_FES;
+		value &= ~hw->link.speed_mask;
+		switch (hw->ps) {
+		case SPEED_1000:
+			value |= hw->link.speed1000;
+			break;
+		case SPEED_100:
+			value |= hw->link.speed100;
+			break;
+		case SPEED_10:
+			value |= hw->link.speed10;
+			break;
 		}
 	}
 
@@ -531,9 +533,11 @@ struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
 	mac->mac = &dwmac1000_ops;
 	mac->dma = &dwmac1000_dma_ops;
 
-	mac->link.port = GMAC_CONTROL_PS;
 	mac->link.duplex = GMAC_CONTROL_DM;
-	mac->link.speed = GMAC_CONTROL_FES;
+	mac->link.speed10 = GMAC_CONTROL_PS;
+	mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+	mac->link.speed1000 = 0;
+	mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
 	mac->mii.addr = GMAC_MII_ADDR;
 	mac->mii.data = GMAC_MII_DATA;
 	mac->mii.addr_shift = 11;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 1b3609105484..8ef517356313 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -175,9 +175,11 @@ struct mac_device_info *dwmac100_setup(void __iomem *ioaddr, int *synopsys_id)
 	mac->mac = &dwmac100_ops;
 	mac->dma = &dwmac100_dma_ops;
 
-	mac->link.port = MAC_CONTROL_PS;
 	mac->link.duplex = MAC_CONTROL_F;
-	mac->link.speed = 0;
+	mac->link.speed10 = 0;
+	mac->link.speed100 = 0;
+	mac->link.speed1000 = 0;
+	mac->link.speed_mask = MAC_CONTROL_PS;
 	mac->mii.addr = MAC_MII_ADDR;
 	mac->mii.data = MAC_MII_DATA;
 	mac->mii.addr_shift = 11;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 48793f2e9307..f233bf8b4ebb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -35,15 +35,17 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
 	if (hw->ps) {
 		value |= GMAC_CONFIG_TE;
 
-		if (hw->ps == SPEED_1000) {
-			value &= ~GMAC_CONFIG_PS;
-		} else {
-			value |= GMAC_CONFIG_PS;
-
-			if (hw->ps == SPEED_10)
-				value &= ~GMAC_CONFIG_FES;
-			else
-				value |= GMAC_CONFIG_FES;
+		value &= hw->link.speed_mask;
+		switch (hw->ps) {
+		case SPEED_1000:
+			value |= hw->link.speed1000;
+			break;
+		case SPEED_100:
+			value |= hw->link.speed100;
+			break;
+		case SPEED_10:
+			value |= hw->link.speed10;
+			break;
 		}
 	}
 
@@ -747,9 +749,11 @@ struct mac_device_info *dwmac4_setup(void __iomem *ioaddr, int mcbins,
 	if (mac->multicast_filter_bins)
 		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
-	mac->link.port = GMAC_CONFIG_PS;
 	mac->link.duplex = GMAC_CONFIG_DM;
-	mac->link.speed = GMAC_CONFIG_FES;
+	mac->link.speed10 = GMAC_CONFIG_PS;
+	mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
+	mac->link.speed1000 = 0;
+	mac->link.speed_mask = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
 	mac->mii.addr = GMAC_MDIO_ADDR;
 	mac->mii.data = GMAC_MDIO_DATA;
 	mac->mii.addr_shift = 21;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4bd83a29cbd5..68a188e74c54 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -812,29 +812,16 @@ static void stmmac_adjust_link(struct net_device *dev)
 
 		if (phydev->speed != priv->speed) {
 			new_state = true;
+			ctrl &= ~priv->hw->link.speed_mask;
 			switch (phydev->speed) {
 			case SPEED_1000:
-				if (priv->plat->has_gmac ||
-				    priv->plat->has_gmac4)
-					ctrl &= ~priv->hw->link.port;
+				ctrl |= priv->hw->link.speed1000;
 				break;
 			case SPEED_100:
-				if (priv->plat->has_gmac ||
-				    priv->plat->has_gmac4) {
-					ctrl |= priv->hw->link.port;
-					ctrl |= priv->hw->link.speed;
-				} else {
-					ctrl &= ~priv->hw->link.port;
-				}
+				ctrl |= priv->hw->link.speed100;
 				break;
 			case SPEED_10:
-				if (priv->plat->has_gmac ||
-				    priv->plat->has_gmac4) {
-					ctrl |= priv->hw->link.port;
-					ctrl &= ~(priv->hw->link.speed);
-				} else {
-					ctrl &= ~priv->hw->link.port;
-				}
+				ctrl |= priv->hw->link.speed10;
 				break;
 			default:
 				netif_warn(priv, link, priv->dev,
-- 
2.13.0

Re: [PATCH v3 0/5] net-next: stmmac: rework the speed selection

[David Miller]

From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: Wed, 24 May 2017 09:16:42 +0200

> The current stmmac_adjust_link() part which handle speed have
> some if (has_platform) code and my dwmac-sun8i will add more of them.
> 
> So we need to handle better speed selection.
> Moreover the struct link member speed and port are hard to guess their
> purpose. And their unique usage are to be combined for writing speed.
> 
> My first try was to create an adjust_link() in stmmac_ops but it duplicate some code
> 
> The current solution is to have direct value for 10/100/1000 and a mask for them.
> 
> The first 4 patchs fix some minor problem found in stmmac_adjust_link() and reported by Florian Fainelli in my previous serie.
> The last patch is the real work.
> 
> This series is tested on cubieboard2 (dwmac1000) and opipc (dwmac-sun8i).

Series applied.