From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: roopa@cumulusnetworks.com, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 2/6] net: lwtunnel: Add extack to encap attr validation
Date: Wed, 24 May 2017 21:54:38 -0600 [thread overview]
Message-ID: <20170525035442.51407-3-dsahern@gmail.com> (raw)
In-Reply-To: <20170525035442.51407-1-dsahern@gmail.com>
Pass extack down to lwtunnel_valid_encap_type and
lwtunnel_valid_encap_type_attr. Add messages for unknown
or unsupported encap types.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
include/net/lwtunnel.h | 13 +++++++++----
net/core/lwtunnel.c | 18 +++++++++++++-----
net/ipv4/fib_frontend.c | 6 ++++--
net/ipv6/route.c | 4 ++--
4 files changed, 28 insertions(+), 13 deletions(-)
diff --git a/include/net/lwtunnel.h b/include/net/lwtunnel.h
index ebfe237aad7e..ca6f002774ef 100644
--- a/include/net/lwtunnel.h
+++ b/include/net/lwtunnel.h
@@ -107,8 +107,10 @@ int lwtunnel_encap_add_ops(const struct lwtunnel_encap_ops *op,
unsigned int num);
int lwtunnel_encap_del_ops(const struct lwtunnel_encap_ops *op,
unsigned int num);
-int lwtunnel_valid_encap_type(u16 encap_type);
-int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len);
+int lwtunnel_valid_encap_type(u16 encap_type,
+ struct netlink_ext_ack *extack);
+int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len,
+ struct netlink_ext_ack *extack);
int lwtunnel_build_state(u16 encap_type,
struct nlattr *encap,
unsigned int family, const void *cfg,
@@ -172,11 +174,14 @@ static inline int lwtunnel_encap_del_ops(const struct lwtunnel_encap_ops *op,
return -EOPNOTSUPP;
}
-static inline int lwtunnel_valid_encap_type(u16 encap_type)
+static inline int lwtunnel_valid_encap_type(u16 encap_type,
+ struct netlink_ext_ack *extack)
{
+ NL_SET_ERR_MSG(extack, "CONFIG_LWTUNNEL is not enabled in this kernel");
return -EOPNOTSUPP;
}
-static inline int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len)
+static inline int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len,
+ struct netlink_ext_ack *extack)
{
/* return 0 since we are not walking attr looking for
* RTA_ENCAP_TYPE attribute on nexthops.
diff --git a/net/core/lwtunnel.c b/net/core/lwtunnel.c
index cfae3d5fe11f..ab840386a74d 100644
--- a/net/core/lwtunnel.c
+++ b/net/core/lwtunnel.c
@@ -126,14 +126,16 @@ int lwtunnel_build_state(u16 encap_type,
}
EXPORT_SYMBOL(lwtunnel_build_state);
-int lwtunnel_valid_encap_type(u16 encap_type)
+int lwtunnel_valid_encap_type(u16 encap_type, struct netlink_ext_ack *extack)
{
const struct lwtunnel_encap_ops *ops;
int ret = -EINVAL;
if (encap_type == LWTUNNEL_ENCAP_NONE ||
- encap_type > LWTUNNEL_ENCAP_MAX)
+ encap_type > LWTUNNEL_ENCAP_MAX) {
+ NL_SET_ERR_MSG(extack, "Unknown lwt encapsulation type");
return ret;
+ }
rcu_read_lock();
ops = rcu_dereference(lwtun_encaps[encap_type]);
@@ -153,11 +155,16 @@ int lwtunnel_valid_encap_type(u16 encap_type)
}
}
#endif
- return ops ? 0 : -EOPNOTSUPP;
+ ret = ops ? 0 : -EOPNOTSUPP;
+ if (ret < 0)
+ NL_SET_ERR_MSG(extack, "lwt encapsulation type not supported");
+
+ return ret;
}
EXPORT_SYMBOL(lwtunnel_valid_encap_type);
-int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int remaining)
+int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int remaining,
+ struct netlink_ext_ack *extack)
{
struct rtnexthop *rtnh = (struct rtnexthop *)attr;
struct nlattr *nla_entype;
@@ -174,7 +181,8 @@ int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int remaining)
if (nla_entype) {
encap_type = nla_get_u16(nla_entype);
- if (lwtunnel_valid_encap_type(encap_type) != 0)
+ if (lwtunnel_valid_encap_type(encap_type,
+ extack) != 0)
return -EOPNOTSUPP;
}
}
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 2d55882d566e..f03fe8521f6e 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -684,7 +684,8 @@ static int rtm_to_fib_config(struct net *net, struct sk_buff *skb,
break;
case RTA_MULTIPATH:
err = lwtunnel_valid_encap_type_attr(nla_data(attr),
- nla_len(attr));
+ nla_len(attr),
+ extack);
if (err < 0)
goto errout;
cfg->fc_mp = nla_data(attr);
@@ -701,7 +702,8 @@ static int rtm_to_fib_config(struct net *net, struct sk_buff *skb,
break;
case RTA_ENCAP_TYPE:
cfg->fc_encap_type = nla_get_u16(attr);
- err = lwtunnel_valid_encap_type(cfg->fc_encap_type);
+ err = lwtunnel_valid_encap_type(cfg->fc_encap_type,
+ extack);
if (err < 0)
goto errout;
break;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 80bda31ffbbe..afc76b24ee6b 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3016,7 +3016,7 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh,
cfg->fc_mp_len = nla_len(tb[RTA_MULTIPATH]);
err = lwtunnel_valid_encap_type_attr(cfg->fc_mp,
- cfg->fc_mp_len);
+ cfg->fc_mp_len, extack);
if (err < 0)
goto errout;
}
@@ -3035,7 +3035,7 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh,
if (tb[RTA_ENCAP_TYPE]) {
cfg->fc_encap_type = nla_get_u16(tb[RTA_ENCAP_TYPE]);
- err = lwtunnel_valid_encap_type(cfg->fc_encap_type);
+ err = lwtunnel_valid_encap_type(cfg->fc_encap_type, extack);
if (err < 0)
goto errout;
}
--
2.11.0 (Apple Git-81)
next prev parent reply other threads:[~2017-05-25 3:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-25 3:54 [PATCH net-next 0/6] net: another round of extack handling for routing David Ahern
2017-05-25 3:54 ` [PATCH net-next 1/6] net: ipv4: Add extack message for invalid prefix or length David Ahern
2017-05-25 3:54 ` David Ahern [this message]
2017-05-25 3:54 ` [PATCH net-next 3/6] net: plumb extack arg down to lwtunnel build state David Ahern
2017-05-25 3:54 ` [PATCH net-next 4/6] net: Fill in extack for mpls lwt encap David Ahern
2017-05-25 3:54 ` [PATCH net-next 5/6] net: mpls: Add extack messages for route add and delete failures David Ahern
2017-05-25 3:54 ` [PATCH net-next 6/6] net: mpls: minor cleanups David Ahern
2017-05-25 18:56 ` David Miller
2017-05-25 19:46 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170525035442.51407-3-dsahern@gmail.com \
--to=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=roopa@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).