From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Burton Subject: [PATCH v4 0/7] net: pch_gbe: Fixes & MIPS support Date: Mon, 5 Jun 2017 10:31:29 -0700 Message-ID: <20170605173136.10795-1-paul.burton@imgtec.com> References: <20170602234042.22782-1-paul.burton@imgtec.com> Mime-Version: 1.0 Content-Type: text/plain Cc: "David S . Miller" , , Eric Dumazet , Jarod Wilson , Tobias Klauser , Paul Burton To: Return-path: Received: from mailapp01.imgtec.com ([195.59.15.196]:30883 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751214AbdFERcM (ORCPT ); Mon, 5 Jun 2017 13:32:12 -0400 In-Reply-To: <20170602234042.22782-1-paul.burton@imgtec.com> Sender: netdev-owner@vger.kernel.org List-ID: The Intel EG20T Platform Controller Hub is used on the MIPS Boston development board to provide various peripherals including ethernet. This series fixes some issues with the pch_gbe driver discovered whilst in use on the Boston board, and implements support for device tree which we use to provide the PHY reset GPIO. Applies atop v4.12-rc4. Paul Burton (7): net: pch_gbe: Mark Minnow PHY reset GPIO active low net: pch_gbe: Pull PHY GPIO handling out of Minnow code dt-bindings: net: Document Intel pch_gbe binding net: pch_gbe: Add device tree support net: pch_gbe: Always reset PHY along with MAC net: pch_gbe: Allow longer for resets net: pch_gbe: Allow build on MIPS platforms Documentation/devicetree/bindings/net/pch_gbe.txt | 25 +++++++ drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 2 +- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 4 +- .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 79 +++++++++++++++++----- 4 files changed, 91 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/pch_gbe.txt -- 2.13.0