From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com
Subject: [net-next 00/11][pull request] 1GbE Intel Wired LAN Driver Updates 2017-06-06
Date: Tue, 6 Jun 2017 01:57:58 -0700 [thread overview]
Message-ID: <20170606085809.78571-1-jeffrey.t.kirsher@intel.com> (raw)
This series contains updates and fixes to e1000e and igb.
Matwey V Kornilov fixes an issue where igb_get_phy_id_82575() relies on
the fact that page 0 is already selected, but this is not the case after
igb_read_phy_reg_gs40g()/igb_write_phy_reg_gs40g() were removed in a
previous commit. This leads to initialization failure and some devices
not working. To fix the issue, explicitly select page 0 before first
access to PHY registers.
Arnd Bergmann modifies the driver to avoid a "defined but not used"
warning by removing #ifdefs and using __maybe_unused annotation instead
for new power management functions.
Jake provides most of the changes in the series, all around PTP and
timestamp fixes/updates. Resolved several race conditions based on
the hardware can only handle one transmit timestamp at a time, so
fix the locking logic, as well as create a statistic for "skipped"
timestamps to help administrators identify issues.
Benjamin Poirier provides 2 changes, first to igb to remove the
second argument to igb_update_stats() since it always passes the
same two arguments. So instead of having to pass the second argument,
just update the function to the necessary information from the adapter
structure. Second modifies the e1000e_get_stats64() call to
dev_get_stats() to avoid ethtool garbage being reported.
Konstantin Khlebnikov modifies e1000e to use disable_hardirq(), instead
of disable_irq() for MSIx vectors in e1000_netpoll().
The following are changes since commit 9d15e5cc8cb68326f7f89b76e04c834fe8e1a2db:
mdio: mux: fix an incorrect less than zero error check using a u32
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 1GbE
Arnd Bergmann (1):
igb: mark PM functions as __maybe_unused
Benjamin Poirier (2):
igb: Remove useless argument
e1000e: Don't return uninitialized stats
Jacob Keller (6):
e1000e: fix race condition around skb_tstamp_tx()
igb: fix race condition with PTP_TX_IN_PROGRESS bits
igb: avoid permanent lock of *_PTP_TX_IN_PROGRESS
e1000e: add statistic indicating number of skipped Tx timestamps
igb: add statistic indicating number of skipped Tx timestamps
igb: check for Tx timestamp timeouts during watchdog
Konstantin Khlebnikov (1):
e1000e: use disable_hardirq() also for MSIX vectors in e1000_netpoll()
Matwey V Kornilov (1):
igb: Explicitly select page 0 at initialization
drivers/net/ethernet/intel/e1000e/e1000.h | 1 +
drivers/net/ethernet/intel/e1000e/ethtool.c | 3 +-
drivers/net/ethernet/intel/e1000e/netdev.c | 39 ++++++++++++--------
drivers/net/ethernet/intel/igb/e1000_82575.c | 1 +
drivers/net/ethernet/intel/igb/igb.h | 4 ++-
drivers/net/ethernet/intel/igb/igb_ethtool.c | 3 +-
drivers/net/ethernet/intel/igb/igb_main.c | 54 ++++++++++++++++------------
drivers/net/ethernet/intel/igb/igb_ptp.c | 41 +++++++++++++++++++--
8 files changed, 103 insertions(+), 43 deletions(-)
--
2.12.2
next reply other threads:[~2017-06-06 8:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 8:57 Jeff Kirsher [this message]
2017-06-06 8:57 ` [net-next 01/11] igb: Explicitly select page 0 at initialization Jeff Kirsher
2017-06-06 8:58 ` [net-next 02/11] igb: mark PM functions as __maybe_unused Jeff Kirsher
2017-06-06 8:58 ` [net-next 03/11] e1000e: fix race condition around skb_tstamp_tx() Jeff Kirsher
2017-06-06 8:58 ` [net-next 04/11] igb: fix race condition with PTP_TX_IN_PROGRESS bits Jeff Kirsher
2017-06-06 8:58 ` [net-next 05/11] igb: avoid permanent lock of *_PTP_TX_IN_PROGRESS Jeff Kirsher
2017-06-06 8:58 ` [net-next 06/11] e1000e: add statistic indicating number of skipped Tx timestamps Jeff Kirsher
2017-06-06 8:58 ` [net-next 07/11] igb: " Jeff Kirsher
2017-06-06 8:58 ` [net-next 08/11] igb: check for Tx timestamp timeouts during watchdog Jeff Kirsher
2017-06-06 8:58 ` [net-next 09/11] igb: Remove useless argument Jeff Kirsher
2017-06-06 8:58 ` [net-next 10/11] e1000e: Don't return uninitialized stats Jeff Kirsher
2017-06-06 8:58 ` [net-next 11/11] e1000e: use disable_hardirq() also for MSIX vectors in e1000_netpoll() Jeff Kirsher
2017-06-06 15:58 ` [net-next 00/11][pull request] 1GbE Intel Wired LAN Driver Updates 2017-06-06 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606085809.78571-1-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).