From: Bo Yu <tsu.yubo@gmail.com>
To: Salil Mehta <salil.mehta@huawei.com>
Cc: davem@davemloft.net, yisen.zhuang@huawei.com,
huangdaode@hisilicon.com, lipeng321@huawei.com,
mehta.salil.lnk@gmail.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linuxarm@huawei.com
Subject: Re: [PATCH V3 net-next 2/8] net: hns3: Add support of the HNAE3 framework
Date: Mon, 19 Jun 2017 08:40:02 +0800 [thread overview]
Message-ID: <20170619004001.7akkdon47o3mspa4@debian> (raw)
In-Reply-To: <20170617172431.177044-3-salil.mehta@huawei.com>
Hi,
On Sat, Jun 17, 2017 at 06:24:25PM +0100, Salil Mehta wrote:
>+ * Unregister client from ae_dev
>+ * start()
>+ * Enable the hardware
>+ * stop()
>+ * Disable the hardware
>+ * get_status()
>+ * Get the carrier state of the back channel of the handle, 1 for ok, 0 for
>+ * non-ok
>+ * get_ksettings_an_result()
>+ * Get negotiation status,speed and duplex
>+ * update_speed_duplex_h()
>+ * Update hardware speed and duplex
>+ * get_media_type()
>+ * Get media type of MAC
>+ * adjust_link()
>+ * Adjust link status
>+ * set_loopback()
>+ * Set loopback
>+ * set_promisc_mode
>+ * Set promisc mode
>+ * set_mtu()
>+ * set mtu
>+ * get_pauseparam()
>+ * get tx and rx of pause frame use
>+ * set_pauseparam()
>+ * set tx and rx of pause frame use
>+ * set_autoneg()
>+ * set auto autonegotiation of pause frame use
>+ * get_autoneg()
>+ * get auto autonegotiation of pause frame use
>+ * get_coalesce_usecs()
>+ * get usecs to delay a TX interrupt after a packet is sent
>+ * get_rx_max_coalesced_frames()
>+ * get Maximum number of packets to be sent before a TX interrupt.
>+ * set_coalesce_usecs()
>+ * set usecs to delay a TX interrupt after a packet is sent
>+ * set_coalesce_frames()
>+ * set Maximum number of packets to be sent before a TX interrupt.
>+ * get_mac_addr()
>+ * get mac address
>+ * set_mac_addr()
>+ * set mac address
>+ * add_uc_addr
>+ * Add unicast addr to mac table
>+ * rm_uc_addr
>+ * Remove unicast addr from mac table
>+ * set_mc_addr()
>+ * Set multicast address
>+ * add_mc_addr
>+ * Add multicast address to mac table
>+ * rm_mc_addr
>+ * Remove multicast address from mac table
>+ * update_stats()
>+ * Update Old network device statistics
>+ * get_ethtool_stats()
>+ * Get ethtool network device statistics
>+ * get_strings()
>+ * Get a set of strings that describe the requested objects
>+ * get_sset_count()
>+ * Get number of strings that @get_strings will write
>+ * update_led_status()
>+ * Update the led status
>+ * set_led_id()
>+ * Set led id
>+ * get_regs()
>+ * Get regs dump
>+ * get_regs_len()
>+ * Get the len of the regs dump
>+ * get_rss_key_size()
>+ * Get rss key size
>+ * get_rss_indir_size()
>+ * Get rss indirection table size
>+ * get_rss()
>+ * Get rss table
>+ * set_rss()
>+ * Set rss table
>+ * get_tc_size()
>+ * Get tc size of handle
>+ * get_vector()
>+ * Get vector number and vector infomation
Just another spealling : information
Checkpatch will report it also.
>+ * map_ring_to_vector()
>+ * Map rings to vector
>+ * unmap_ring_from_vector()
>+ * Unmap rings from vector
>+ * add_tunnel_udp()
>+ * Add tunnel information to hardware
>+ * del_tunnel_udp()
>+ * Delete tunnel information from hardware
>+ * reset_queue()
>+ * Reset queue
>+ * get_fw_version()
>+ * Get firmware version
>+ * get_mdix_mode()
>+ * Get media typr of phy
>+ * set_vlan_filter()
>+ * Set vlan filter config of Ports
>+ * set_vf_vlan_filter()
>+ * Set vlan filter config of vf
>+ */
>+struct hnae3_ae_ops {
>+ int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
>+ void (*uninit_ae_dev)(struct hnae3_ae_dev *ae_dev);
>+
>+ int (*register_client)(struct hnae3_client *client,
>+ struct hnae3_ae_dev *ae_dev);
>+ void (*unregister_client)(struct hnae3_client *client,
>+ struct hnae3_ae_dev *ae_dev);
>+ int (*start)(struct hnae3_handle *handle);
>+ void (*stop)(struct hnae3_handle *handle);
>+ int (*get_status)(struct hnae3_handle *handle);
>+ void (*get_ksettings_an_result)(struct hnae3_handle *handle,
>+ u8 *auto_neg, u32 *speed, u8 *duplex);
>+
>+ int (*update_speed_duplex_h)(struct hnae3_handle *handle);
>+ int (*cfg_mac_speed_dup_h)(struct hnae3_handle *handle, int speed,
>+ u8 duplex);
>+
>+ void (*get_media_type)(struct hnae3_handle *handle, u8 *media_type);
>+ void (*adjust_link)(struct hnae3_handle *handle, int speed, int duplex);
>+ int (*set_loopback)(struct hnae3_handle *handle,
>+ enum hnae3_loop loop_mode, bool en);
>+
>+ void (*set_promisc_mode)(struct hnae3_handle *handle, u32 en);
>+ int (*set_mtu)(struct hnae3_handle *handle, int new_mtu);
>+
>+ void (*get_pauseparam)(struct hnae3_handle *handle,
>+ u32 *auto_neg, u32 *rx_en, u32 *tx_en);
>+ int (*set_pauseparam)(struct hnae3_handle *handle,
>+ u32 auto_neg, u32 rx_en, u32 tx_en);
>+
>+ int (*set_autoneg)(struct hnae3_handle *handle, bool enable);
>+ int (*get_autoneg)(struct hnae3_handle *handle);
>+
>+ void (*get_coalesce_usecs)(struct hnae3_handle *handle,
>+ u32 *tx_usecs, u32 *rx_usecs);
>+ void (*get_rx_max_coalesced_frames)(struct hnae3_handle *handle,
>+ u32 *tx_frames, u32 *rx_frames);
>+ int (*set_coalesce_usecs)(struct hnae3_handle *handle, u32 timeout);
>+ int (*set_coalesce_frames)(struct hnae3_handle *handle,
>+ u32 coalesce_frames);
>+ void (*get_coalesce_range)(struct hnae3_handle *handle,
>+ u32 *tx_frames_low, u32 *rx_frames_low,
>+ u32 *tx_frames_high, u32 *rx_frames_high,
>+ u32 *tx_usecs_low, u32 *rx_usecs_low,
>+ u32 *tx_usecs_high, u32 *rx_usecs_high);
>+
>+ void (*get_mac_addr)(struct hnae3_handle *handle, u8 *p);
>+ int (*set_mac_addr)(struct hnae3_handle *handle, void *p);
>+ int (*add_uc_addr)(struct hnae3_handle *handle,
>+ const unsigned char *addr);
>+ int (*rm_uc_addr)(struct hnae3_handle *handle,
>+ const unsigned char *addr);
>+ int (*set_mc_addr)(struct hnae3_handle *handle, void *addr);
>+ int (*add_mc_addr)(struct hnae3_handle *handle,
>+ const unsigned char *addr);
>+ int (*rm_mc_addr)(struct hnae3_handle *handle,
>+ const unsigned char *addr);
>+
>+ void (*set_tso_stats)(struct hnae3_handle *handle, int enable);
>+ void (*update_stats)(struct hnae3_handle *handle,
>+ struct net_device_stats *net_stats);
>+ void (*get_stats)(struct hnae3_handle *handle, u64 *data);
>+
>+ void (*get_strings)(struct hnae3_handle *handle,
>+ u32 stringset, u8 *data);
>+ int (*get_sset_count)(struct hnae3_handle *handle, int stringset);
>+
>+ void (*get_regs)(struct hnae3_handle *handle, void *data);
>+ int (*get_regs_len)(struct hnae3_handle *handle);
>+
>+ u32 (*get_rss_key_size)(struct hnae3_handle *handle);
>+ u32 (*get_rss_indir_size)(struct hnae3_handle *handle);
>+ int (*get_rss)(struct hnae3_handle *handle, u32 *indir, u8 *key,
>+ u8 *hfunc);
>+ int (*set_rss)(struct hnae3_handle *handle, const u32 *indir,
>+ const u8 *key, const u8 hfunc);
>+
>+ int (*get_tc_size)(struct hnae3_handle *handle);
>+
>+ int (*get_vector)(struct hnae3_handle *handle, u16 vector_num,
>+ struct hnae3_vector_info *vector_info);
>+ int (*map_ring_to_vector)(struct hnae3_handle *handle,
>+ int vector_num,
>+ struct hnae3_ring_chain_node *vr_chain);
>+ int (*unmap_ring_from_vector)(struct hnae3_handle *handle,
>+ int vector_num,
>+ struct hnae3_ring_chain_node *vr_chain);
>+
>+ int (*add_tunnel_udp)(struct hnae3_handle *handle, u16 port_num);
>+ int (*del_tunnel_udp)(struct hnae3_handle *handle, u16 port_num);
>+
>+ void (*reset_queue)(struct hnae3_handle *handle, u16 queue_id);
>+ u32 (*get_fw_version)(struct hnae3_handle *handle);
>+ void (*get_mdix_mode)(struct hnae3_handle *handle,
>+ u8 *tp_mdix_ctrl, u8 *tp_mdix);
>+
>+ int (*set_vlan_filter)(struct hnae3_handle *handle, __be16 proto,
>+ u16 vlan_id, bool is_kill);
>+ int (*set_vf_vlan_filter)(struct hnae3_handle *handle, int vfid,
>+ u16 vlan, u8 qos, __be16 proto);
>+};
>+
>+struct hnae3_ae_algo {
>+ struct hnae3_ae_ops *ops;
>+ struct list_head node;
>+ char name[HNAE3_CLASS_NAME_SIZE];
>+ const struct pci_device_id *pdev_id_table;
>+};
>+
>+#define HNAE3_INT_NAME_LEN (IFNAMSIZ + 16)
>+#define HNAE3_ITR_COUNTDOWN_START 100
>+
>+struct hnae3_tc_info {
>+ u16 tqp_offset; /* TQP offset from base TQP */
>+ u16 tqp_count; /* Total TQPs */
>+ u8 up; /* user priority */
>+ u8 tc; /* TC index */
>+ bool enable; /* If this TC is enable or not */
>+};
>+
>+#define HNAE3_MAX_TC 8
>+struct hnae3_knic_private_info {
>+ struct net_device *netdev; /* Set by KNIC client when init instance */
>+ u16 rss_size; /* Allocated RSS queues */
>+ u16 rx_buf_len;
>+ u16 num_desc;
>+
>+ u8 num_tc; /* Total number of enabled TCs */
>+ struct hnae3_tc_info tc_info[HNAE3_MAX_TC]; /* Idx of array is HW TC */
>+
>+ u16 num_tqps; /* total number of TQPs in this handle */
>+ struct hnae3_queue **tqp; /* array base of all TQPs in this instance */
>+};
>+
>+struct hnae3_roce_private_info {
>+ void __iomem *roce_io_base;
>+ struct net_device *netdev;
>+ int base_vector;
>+ int num_vectors;
>+};
>+
>+struct hnae3_unic_private_info {
>+ u16 rx_buf_len;
>+ u16 num_desc;
>+ u16 num_tqps; /* total number of tqps in this handle */
>+ struct hnae3_queue **tqp; /* array base of all TQPs of this instance */
>+};
>+
>+#define HNAE3_SUPPORT_MAC_LOOPBACK 1
>+#define HNAE3_SUPPORT_PHY_LOOPBACK 2
>+#define HNAE3_SUPPORT_SERDES_LOOPBACK 4
>+
>+struct hnae3_handle {
>+ struct hnae3_client *client;
>+ struct pci_dev *pdev;
>+ void *priv;
>+ struct hnae3_ae_algo *ae_algo; /* the class who provides this handle */
>+ u64 flags; /* Indicate the capabilities for this handle*/
>+
>+ union {
>+ struct hnae3_knic_private_info kinfo;
>+ struct hnae3_unic_private_info uinfo;
>+ struct hnae3_roce_private_info rinfo;
>+ };
>+
>+ u32 numa_node_mask; /* for multi-chip support */
>+};
>+
>+#define hnae_set_field(origin, mask, shift, val) \
>+ do { \
>+ (origin) &= (~(mask)); \
>+ (origin) |= ((val) << (shift)) & (mask); \
>+ } while (0)
>+#define hnae_get_field(origin, mask, shift) (((origin) & (mask)) >> (shift))
>+
>+#define hnae_set_bit(origin, shift, val) \
>+ hnae_set_field((origin), (0x1 << (shift)), (shift), (val))
>+#define hnae_get_bit(origin, shift) \
>+ hnae_get_field((origin), (0x1 << (shift)), (shift))
>+
>+int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev);
>+void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev);
>+
>+void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo);
>+int hnae3_register_ae_algo(struct hnae3_ae_algo *ae_algo);
>+
>+void hnae3_unregister_client(struct hnae3_client *client);
>+int hnae3_register_client(struct hnae3_client *client);
>+#endif
>--
>2.7.4
>
>
next prev parent reply other threads:[~2017-06-18 16:40 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-17 17:24 [PATCH V3 net-next 0/8] Hisilicon Network Subsystem 3 Ethernet Driver Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 1/8] net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC Salil Mehta
2017-06-17 17:54 ` Andrew Lunn
2017-07-22 23:17 ` Salil Mehta
2017-06-17 19:41 ` Andrew Lunn
2017-06-19 0:18 ` Bo Yu
2017-07-22 23:34 ` Salil Mehta
2017-06-19 0:57 ` Bo Yu
2017-07-22 23:39 ` Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 2/8] net: hns3: Add support of the HNAE3 framework Salil Mehta
2017-06-17 19:45 ` Andrew Lunn
2017-07-22 23:30 ` Salil Mehta
2017-06-18 15:02 ` Andrew Lunn
2017-07-22 23:32 ` Salil Mehta
2017-06-19 0:40 ` Bo Yu [this message]
2017-07-22 23:36 ` Salil Mehta
2017-06-19 16:59 ` Stephen Hemminger
2017-07-22 23:58 ` Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 3/8] net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 4/8] net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 5/8] net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver Salil Mehta
2017-06-18 16:45 ` Richard Cochran
2017-07-22 23:38 ` Salil Mehta
2017-07-23 6:13 ` Richard Cochran
2017-06-17 17:24 ` [PATCH V3 net-next 6/8] net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC Salil Mehta
2017-06-19 3:52 ` Andrew Lunn
2017-07-22 23:53 ` Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 7/8] net: hns3: Add Ethtool support to HNS3 driver Salil Mehta
2017-06-17 17:24 ` [PATCH V3 net-next 8/8] net: hns3: Add HNS3 driver to kernel build framework & MAINTAINERS Salil Mehta
2017-06-18 6:07 ` [PATCH V3 net-next 0/8] Hisilicon Network Subsystem 3 Ethernet Driver Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170619004001.7akkdon47o3mspa4@debian \
--to=tsu.yubo@gmail.com \
--cc=davem@davemloft.net \
--cc=huangdaode@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=mehta.salil.lnk@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).