[PATCH net-next v4 09/16] bpf: Sample BPF program to set buffer sizes

[Lawrence Brakmo <brakmo@fb.com>]

This patch contains a BPF program to set initial receive window to
40 packets and send and receive buffers to 1.5MB. This would usually
be done after doing appropriate checks that indicate the hosts are
far enough away (i.e. large RTT).

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
---
 samples/bpf/Makefile        |  1 +
 samples/bpf/tcp_bufs_kern.c | 77 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)
 create mode 100644 samples/bpf/tcp_bufs_kern.c

diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index ca95528..3b300db 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -115,6 +115,7 @@ always += test_map_in_map_kern.o
 always += cookie_uid_helper_example.o
 always += tcp_synrto_kern.o
 always += tcp_rwnd_kern.o
+always += tcp_bufs_kern.o
 
 HOSTCFLAGS += -I$(objtree)/usr/include
 HOSTCFLAGS += -I$(srctree)/tools/lib/
diff --git a/samples/bpf/tcp_bufs_kern.c b/samples/bpf/tcp_bufs_kern.c
new file mode 100644
index 0000000..ccd3bbe
--- /dev/null
+++ b/samples/bpf/tcp_bufs_kern.c
@@ -0,0 +1,77 @@
+/* Copyright (c) 2017 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * BPF program to set initial receive window to 40 packets and send
+ * and receive buffers to 1.5MB. This would usually be done after
+ * doing appropriate checks that indicate the hosts are far enough
+ * away (i.e. large RTT).
+ */
+
+#include <uapi/linux/bpf.h>
+#include <uapi/linux/if_ether.h>
+#include <uapi/linux/if_packet.h>
+#include <uapi/linux/ip.h>
+#include <linux/socket.h>
+#include "bpf_helpers.h"
+
+#define DEBUG 1
+
+SEC("sockops")
+int bpf_bufs(struct bpf_sock_ops *skops)
+{
+	char fmt1[] = "BPF command: %d\n";
+	char fmt2[] = "  Returning %d\n";
+	int bufsize = 1500000;
+	int rwnd_init = 40;
+	int rv = 0;
+	int op;
+
+	/* For testing purposes, only execute rest of BPF program
+	 * if neither port numberis 55601
+	 */
+	if (skops->remote_port != 55601 && skops->local_port != 55601)
+		return -1;
+
+	op = (int) skops->op;
+
+#ifdef DEBUG
+	bpf_trace_printk(fmt1, sizeof(fmt1), op);
+#endif
+
+	/* Usually there would be a check to insure the hosts are far
+	 * from each other so it makes sense to increase buffer sizes
+	 */
+	switch (op) {
+	case BPF_SOCK_OPS_RWND_INIT:
+		rv = rwnd_init;
+		break;
+	case BPF_SOCK_OPS_TCP_CONNECT_CB:
+		/* Set sndbuf and rcvbuf of active connections */
+		rv = bpf_setsockopt(skops, SOL_SOCKET, SO_SNDBUF, &bufsize,
+				    sizeof(bufsize));
+		rv = rv*100 + bpf_setsockopt(skops, SOL_SOCKET, SO_RCVBUF,
+					     &bufsize, sizeof(bufsize));
+		break;
+	case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
+		/* Nothing to do */
+		break;
+	case BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB:
+		/* Set sndbuf and rcvbuf of passive connections */
+		rv = bpf_setsockopt(skops, SOL_SOCKET, SO_SNDBUF, &bufsize,
+				    sizeof(bufsize));
+		rv = rv*100 + bpf_setsockopt(skops, SOL_SOCKET, SO_RCVBUF,
+					     &bufsize, sizeof(bufsize));
+		break;
+	default:
+		rv = -1;
+	}
+#ifdef DEBUG
+	bpf_trace_printk(fmt2, sizeof(fmt2), rv);
+#endif
+	skops->reply = rv;
+	return 1;
+}
+char _license[] SEC("license") = "GPL";
-- 
2.9.3