From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>
Cc: linux-rdma@vger.kernel.org,
Stephen Hemminger <stephen@networkplumber.org>,
Ariel Almog <ariela@mellanox.com>,
Linux Netdev <netdev@vger.kernel.org>,
Leon Romanovsky <leonro@mellanox.com>
Subject: [PATCH rdma-next V2 11/27] RDMA/netlink: Convert LS to doit callback
Date: Mon, 3 Jul 2017 09:28:14 +0300 [thread overview]
Message-ID: <20170703062830.30361-12-leon@kernel.org> (raw)
In-Reply-To: <20170703062830.30361-1-leon@kernel.org>
From: Leon Romanovsky <leonro@mellanox.com>
RDMA_NL_LS protocol is actually does not dump anything,
but sets data and it should be handled by doit callback.
This patch actually converts RDMA_NL_LS to doit callback, while
preserving IWCM and RDMA_CM flows through netlink_dump_start().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
---
drivers/infiniband/core/addr.c | 5 ++---
drivers/infiniband/core/core_priv.h | 9 ++++++---
drivers/infiniband/core/device.c | 6 +++---
drivers/infiniband/core/netlink.c | 28 ++++++++++------------------
drivers/infiniband/core/sa_query.c | 8 ++++----
5 files changed, 25 insertions(+), 31 deletions(-)
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index 2cc23a26ce4f..0b283029bc61 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -129,10 +129,9 @@ static void ib_nl_process_good_ip_rsep(const struct nlmsghdr *nlh)
}
int ib_nl_handle_ip_res_resp(struct sk_buff *skb,
- struct netlink_callback *cb)
+ struct nlmsghdr *nlh,
+ struct netlink_ext_ack *extack)
{
- const struct nlmsghdr *nlh = (struct nlmsghdr *)cb->nlh;
-
if ((nlh->nlmsg_flags & NLM_F_REQUEST) ||
!(NETLINK_CB(skb).sk))
return -EPERM;
diff --git a/drivers/infiniband/core/core_priv.h b/drivers/infiniband/core/core_priv.h
index 8733c26258b2..03e39ccaae2a 100644
--- a/drivers/infiniband/core/core_priv.h
+++ b/drivers/infiniband/core/core_priv.h
@@ -188,11 +188,14 @@ void rdma_nl_exit(void);
int ibnl_chk_listeners(unsigned int group);
int ib_nl_handle_resolve_resp(struct sk_buff *skb,
- struct netlink_callback *cb);
+ struct nlmsghdr *nlh,
+ struct netlink_ext_ack *extack);
int ib_nl_handle_set_timeout(struct sk_buff *skb,
- struct netlink_callback *cb);
+ struct nlmsghdr *nlh,
+ struct netlink_ext_ack *extack);
int ib_nl_handle_ip_res_resp(struct sk_buff *skb,
- struct netlink_callback *cb);
+ struct nlmsghdr *nlh,
+ struct netlink_ext_ack *extack);
struct ib_device *__ib_device_get_by_index(u32 ifindex);
/* RDMA device netlink */
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 7ff65d766d86..4aaf51db528a 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1070,15 +1070,15 @@ EXPORT_SYMBOL(ib_get_net_dev_by_params);
static const struct rdma_nl_cbs ibnl_ls_cb_table[] = {
[RDMA_NL_LS_OP_RESOLVE] = {
- .dump = ib_nl_handle_resolve_resp,
+ .doit = ib_nl_handle_resolve_resp,
.flags = RDMA_NL_ADMIN_PERM,
},
[RDMA_NL_LS_OP_SET_TIMEOUT] = {
- .dump = ib_nl_handle_set_timeout,
+ .doit = ib_nl_handle_set_timeout,
.flags = RDMA_NL_ADMIN_PERM,
},
[RDMA_NL_LS_OP_IP_RESOLVE] = {
- .dump = ib_nl_handle_ip_res_resp,
+ .doit = ib_nl_handle_ip_res_resp,
.flags = RDMA_NL_ADMIN_PERM,
},
};
diff --git a/drivers/infiniband/core/netlink.c b/drivers/infiniband/core/netlink.c
index 6c3bb2693afa..3efa161bf4a6 100644
--- a/drivers/infiniband/core/netlink.c
+++ b/drivers/infiniband/core/netlink.c
@@ -155,38 +155,30 @@ static int rdma_nl_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
int type = nlh->nlmsg_type;
unsigned int index = RDMA_NL_GET_CLIENT(type);
unsigned int op = RDMA_NL_GET_OP(type);
- struct netlink_callback cb = {};
- struct netlink_dump_control c = {};
const struct rdma_nl_cbs *cb_table;
- int ret;
if (!is_nl_valid(index, op))
return -EINVAL;
- cb_table = rdma_nl_types[type].cb_table;
+ cb_table = rdma_nl_types[index].cb_table;
if ((cb_table[op].flags & RDMA_NL_ADMIN_PERM) &&
!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
- /*
- * For response or local service set_timeout request,
- * there is no need to use netlink_dump_start.
- */
- if (!(nlh->nlmsg_flags & NLM_F_REQUEST) ||
- (index == RDMA_NL_LS && op == RDMA_NL_LS_OP_SET_TIMEOUT)) {
- cb.skb = skb;
- cb.nlh = nlh;
- cb.dump = cb_table[op].dump;
- return cb.dump(skb, &cb);
- } else {
- c.dump = cb_table[op].dump;
+ /* FIXME: Convert IWCM to properly handle doit callbacks */
+ if ((nlh->nlmsg_flags & NLM_F_DUMP) || index == RDMA_NL_RDMA_CM ||
+ index == RDMA_NL_IWCM) {
+ struct netlink_dump_control c = {
+ .dump = cb_table[op].dump,
+ };
return netlink_dump_start(nls, skb, nlh, &c);
}
+
if (cb_table[op].doit)
- ret = cb_table[op].doit(skb, nlh, extack);
- return ret;
+ return cb_table[op].doit(skb, nlh, extack);
+ return 0;
}
/*
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 27535970a2b7..88f06f91741f 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -1022,9 +1022,9 @@ static void ib_nl_request_timeout(struct work_struct *work)
}
int ib_nl_handle_set_timeout(struct sk_buff *skb,
- struct netlink_callback *cb)
+ struct nlmsghdr *nlh,
+ struct netlink_ext_ack *extack)
{
- const struct nlmsghdr *nlh = (struct nlmsghdr *)cb->nlh;
int timeout, delta, abs_delta;
const struct nlattr *attr;
unsigned long flags;
@@ -1098,9 +1098,9 @@ static inline int ib_nl_is_good_resolve_resp(const struct nlmsghdr *nlh)
}
int ib_nl_handle_resolve_resp(struct sk_buff *skb,
- struct netlink_callback *cb)
+ struct nlmsghdr *nlh,
+ struct netlink_ext_ack *extack)
{
- const struct nlmsghdr *nlh = (struct nlmsghdr *)cb->nlh;
unsigned long flags;
struct ib_sa_query *query;
struct ib_mad_send_buf *send_buf;
--
2.13.2
next prev parent reply other threads:[~2017-07-03 6:29 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-03 6:28 [PATCH rdma-next V2 00/27] RDMA Netlink Device Client Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 02/27] RDMA/netlink: Simplify the put_msg and put_attr Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 03/27] RDMA/netlink: Rename and remove redundant parameter from ibnl_unicast Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 04/27] RDMA/netlink: Rename and remove redundant parameter from ibnl_multicast Leon Romanovsky
[not found] ` <20170703062830.30361-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-07-03 6:28 ` [PATCH rdma-next V2 01/27] RDMA/netlink: Add flag to consolidate common handing Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 05/27] RDMA/netlink: Simplify and rename ibnl_chk_listeners Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 12/27] RDMA/netlink: Update copyright Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 13/27] RDMA/netlink: Add netlink device definitions to UAPI Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 14/27] RDMA/netlink: Add nldev initialization flows Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 15/27] RDMA/netlink: Implement nldev device dumpit calback Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 19/27] RDMA/netlink: Expose device and port capability masks Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 23/27] RDMA/netlink: Advertise IB subnet prefix Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 27/27] RDMA/netlink: Export node_type Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 06/27] RDMA/netlink: Rename netlink callback struct Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 07/27] RDMA/core: Add iterator over ib_devices Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 08/27] RDMA/core: Add and expose static device index Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 09/27] RDMA/netlink: Add and implement doit netlink callback Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 10/27] RDMA/netlink: Reduce indirection access to cb_table Leon Romanovsky
2017-07-03 6:28 ` Leon Romanovsky [this message]
2017-07-03 6:28 ` [PATCH rdma-next V2 16/27] RDMA/netlink: Add nldev device doit implementation Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 17/27] RDMA/netlink: Add nldev port dumpit implementation Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 18/27] RDMA/netlink: Implement nldev port doit callback Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 20/27] RDMA: Simplify get firmware interface Leon Romanovsky
[not found] ` <20170703062830.30361-21-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-07-17 14:48 ` Dennis Dalessandro
2017-07-03 6:28 ` [PATCH rdma-next V2 21/27] RDMA/netlink: Export FW version Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 22/27] RDMA/netlink: Export node_guid and sys_image_guid Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 24/27] RDMA/netink: Export lids and sm_lids Leon Romanovsky
[not found] ` <20170703062830.30361-25-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-07-17 15:12 ` Dennis Dalessandro
2017-07-03 6:28 ` [PATCH rdma-next V2 25/27] RDMA/netlink: Export LID mask counter (LMC) Leon Romanovsky
2017-07-17 15:14 ` Dennis Dalessandro
2017-07-17 18:32 ` Leon Romanovsky
2017-07-03 6:28 ` [PATCH rdma-next V2 26/27] RDMA/netlink: Provide port state and physical link state Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170703062830.30361-12-leon@kernel.org \
--to=leon@kernel.org \
--cc=ariela@mellanox.com \
--cc=dledford@redhat.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).