From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brian Norris Subject: Re: [PATCH] mwifiex: uninit wakeup info when failed to add card Date: Wed, 5 Jul 2017 11:08:15 -0700 Message-ID: <20170705180813.GA115427@google.com> References: <1499068470-8022-1-git-send-email-jeffy.chen@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: linux-wireless@vger.kernel.org, akarwar@marvell.com, Xinming Hu , Kalle Valo , Ganapathi Bhat , Amitkumar Karwar , linux-kernel@vger.kernel.org, Nishant Sarmukadam , netdev@vger.kernel.org To: Jeffy Chen Return-path: Content-Disposition: inline In-Reply-To: <1499068470-8022-1-git-send-email-jeffy.chen@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On Mon, Jul 03, 2017 at 03:54:30PM +0800, Jeffy Chen wrote: > We inited wakeup info at the beginning of mwifiex_add_card, so we need > to uninit it in the error handling. > > It's much the same as what we did in: > 36908c4 mwifiex: uninit wakeup info when removing device Yeah, I noticed I hadn't covered all the error cases, so your change is part of the fix. But you're not covering the error paths when the firmware doesn't load correctly -- this happens asynchronously to mwifiex_add_card(). i.e., you need to fixup the error paths in _mwifiex_fw_dpc() too. Brian > Signed-off-by: Jeffy Chen > > --- > > drivers/net/wireless/marvell/mwifiex/main.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c > index f2600b8..17d2cbe 100644 > --- a/drivers/net/wireless/marvell/mwifiex/main.c > +++ b/drivers/net/wireless/marvell/mwifiex/main.c > @@ -1655,6 +1655,8 @@ mwifiex_add_card(void *card, struct completion *fw_done, > mwifiex_shutdown_drv(adapter); > } > err_kmalloc: > + if (adapter->irq_wakeup >= 0) > + device_init_wakeup(adapter->dev, false); > mwifiex_free_adapter(adapter); > > err_init_sw: > -- > 2.1.4 > >