From: ilant@mellanox.com
To: Steffen Klassert <steffen.klassert@secunet.com>, netdev@vger.kernel.org
Cc: Ilan Tayari <ilant@mellanox.com>, Ariel Levkovich <lariel@mellanox.com>
Subject: [PATCH net-next 1/7] esp4: Support RX checksum with crypto offload
Date: Tue, 1 Aug 2017 12:49:04 +0300 [thread overview]
Message-ID: <20170801094910.14895-2-ilant@mellanox.com> (raw)
In-Reply-To: <20170801094910.14895-1-ilant@mellanox.com>
From: Ilan Tayari <ilant@mellanox.com>
Keep the device's reported ip_summed indication in case crypto
was offloaded by the device. Subtract the csum values of the
stripped parts (esp header+iv, esp trailer+auth_data) to keep
value correct.
Note: CHECKSUM_COMPLETE should be indicated only if skb->csum
has the post-decryption offload csum value.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
---
net/ipv4/esp4.c | 14 +++++++++++---
net/ipv4/esp4_offload.c | 4 +++-
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 0cbee0a666ff..741acd7b9646 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -510,7 +510,8 @@ int esp_input_done2(struct sk_buff *skb, int err)
int elen = skb->len - hlen;
int ihl;
u8 nexthdr[2];
- int padlen;
+ int padlen, trimlen;
+ __wsum csumdiff;
if (!xo || (xo && !(xo->flags & CRYPTO_DONE)))
kfree(ESP_SKB_CB(skb)->tmp);
@@ -568,8 +569,15 @@ int esp_input_done2(struct sk_buff *skb, int err)
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
- pskb_trim(skb, skb->len - alen - padlen - 2);
- __skb_pull(skb, hlen);
+ trimlen = alen + padlen + 2;
+ if (skb->ip_summed == CHECKSUM_COMPLETE) {
+ csumdiff = skb_checksum(skb, skb->len - trimlen, trimlen, 0);
+ skb->csum = csum_block_sub(skb->csum, csumdiff,
+ skb->len - trimlen);
+ }
+ pskb_trim(skb, skb->len - trimlen);
+
+ skb_pull_rcsum(skb, hlen);
if (x->props.mode == XFRM_MODE_TUNNEL)
skb_reset_transport_header(skb);
else
diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c
index e0666016a764..05831dea00f4 100644
--- a/net/ipv4/esp4_offload.c
+++ b/net/ipv4/esp4_offload.c
@@ -182,11 +182,13 @@ static struct sk_buff *esp4_gso_segment(struct sk_buff *skb,
static int esp_input_tail(struct xfrm_state *x, struct sk_buff *skb)
{
struct crypto_aead *aead = x->data;
+ struct xfrm_offload *xo = xfrm_offload(skb);
if (!pskb_may_pull(skb, sizeof(struct ip_esp_hdr) + crypto_aead_ivsize(aead)))
return -EINVAL;
- skb->ip_summed = CHECKSUM_NONE;
+ if (!(xo->flags & CRYPTO_DONE))
+ skb->ip_summed = CHECKSUM_NONE;
return esp_input_done2(skb, 0);
}
--
2.11.0
next prev parent reply other threads:[~2017-08-01 9:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-01 9:49 [PATCH net-next 0/7] IPSec offload improvements ilant
2017-08-01 9:49 ` ilant [this message]
2017-08-01 9:49 ` [PATCH net-next 2/7] esp6: Support RX checksum with crypto offload ilant
2017-08-01 9:49 ` [PATCH net-next 3/7] xfrm6: Fix CHECKSUM_COMPLETE after IPv6 header push ilant
2017-08-01 9:49 ` [PATCH net-next 4/7] esp6: Fix RX checksum after header pull ilant
2017-08-01 9:49 ` [PATCH net-next 5/7] xfrm: Auto-load xfrm offload modules ilant
2017-08-01 9:49 ` [PATCH net-next 6/7] xfrm: Clear RX SKB secpath xfrm_offload ilant
2017-08-01 9:49 ` [PATCH net-next 7/7] net: Allow IPsec GSO for local sockets ilant
2017-08-03 11:02 ` [PATCH net-next 0/7] IPSec offload improvements Steffen Klassert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170801094910.14895-2-ilant@mellanox.com \
--to=ilant@mellanox.com \
--cc=lariel@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=steffen.klassert@secunet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox