Re: Question about ip_defrag

[Jesper Dangaard Brouer <brouer@redhat.com>]

On Mon, 28 Aug 2017 16:00:32 +0200
Florian Westphal <fw@strlen.de> wrote:

> liujian (CE) <liujian56@huawei.com> wrote:
> > Hi
> > 
> > I checked our 3.10 kernel, we had backported all percpu_counter bug fix in lib/percpu_counter.c and include/linux/percpu_counter.h.
> > And I check 4.13-rc6, also has the issue if NIC's rx cpu num big enough.
> >   
> > > > > > the issue:
> > > > > > Ip_defrag fail caused by frag_mem_limit reached 4M(frags.high_thresh).
> > > > > > At this moment,sum_frag_mem_limit is about 10K.  
> > 
> > So should we change ipfrag high/low thresh to a reasonable value ? 
> > And if it is, is there a standard to change the value?  
> 
> Each cpu can have frag_percpu_counter_batch bytes rest doesn't know
> about so with 64 cpus that is ~8 mbyte.
> 
> possible solutions:
> 1. reduce frag_percpu_counter_batch to 16k or so
> 2. make both low and high thresh depend on NR_CPUS

To me it looks like we/I have been using the wrong API for comparing
against percpu_counters.  I guess we should have used __percpu_counter_compare().

/*
 * Compare counter against given value.
 * Return 1 if greater, 0 if equal and -1 if less
 */
int __percpu_counter_compare(struct percpu_counter *fbc, s64 rhs, s32 batch)
{
	s64	count;

	count = percpu_counter_read(fbc);
	/* Check to see if rough count will be sufficient for comparison */
	if (abs(count - rhs) > (batch * num_online_cpus())) {
		if (count > rhs)
			return 1;
		else
			return -1;
	}
	/* Need to use precise count */
	count = percpu_counter_sum(fbc);
	if (count > rhs)
		return 1;
	else if (count < rhs)
		return -1;
	else
		return 0;
}
EXPORT_SYMBOL(__percpu_counter_compare);


-- 
Best regards,
  Jesper Dangaard Brouer
  MSc.CS, Principal Kernel Engineer at Red Hat
  LinkedIn: http://www.linkedin.com/in/brouer