Re: [PATCH] DSA support for Micrel KSZ8895

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 2295 bytes --]

Hi!

On Wed 2017-08-30 21:32:07, Tristram.Ha@microchip.com wrote:
> > On Mon 2017-08-28 16:09:27, Andrew Lunn wrote:
> > > > I may be confused here, but AFAICT:
> > > >
> > > > 1) Yes, it has standard layout when accessed over MDIO.
> > >
> > >
> > > Section 4.8 of the datasheet says:
> > >
> > > 	All the registers defined in this section can be also accessed
> > > 	via the SPI interface.
> > >
> > > Meaning all PHY registers can be access via the SPI interface. So you
> > > should be able to make a standard Linux MDIO bus driver which performs
> > > SPI reads.
> > 
> > As far as I can tell (and their driver confirms) -- yes, all those registers can be
> > accessed over the SPI, they are just shuffled around... hence MDIO
> > emulation code. I copied it from their code (see the copyrights) so no, I don't
> > believe there's nicer solution.
> > 
> > Best regards,
> 
> Can you hold on your developing work on KSZ8895 driver?  I am afraid your effort may be in vain.  We at Microchip are planning to release DSA drivers for all KSZ switches, starting at KSZ8795, then KSZ8895, and KSZ8863.
>

Well, thanks for heads up... but its too late to stop now. I already
have working code, without the advanced features.

I don't know how far away you are with the development. You may want
to start from my driver (but its probably too late now).

> The driver files all follow the structures of the current KSZ9477 DSA driver, and the file tag_ksz.c will be updated to handle the tail tag of different chips, which requires including the ksz_priv.h header.  That is required nevertheless to support using the offload_fwd_mark indication.
> 
> The KSZ8795 driver will be submitted after Labor Day (9/4) if
> testing reveals no problem.  The KSZ8895 driver will be submitted
> right after that.  You should have no problem using the driver right
> away.

Well, normally world can help with the testing, too. It would be nice
to see the code, as [RFC]. There's great chance that you'll have to
modify the code to adress review feedback, which is why seeing code
soon is useful.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]