[PATCH net-next v2 0/4] net: dsa: Allow switch drivers to indicate number of TX queues

[Florian Fainelli <f.fainelli@gmail.com>]

Hi all,

This patch series extracts the parts of the patch set that are likely not to be
controversial and actually bringing multi-queue support to DSA-created network
devices.

With these patches, we can now use sch_multiq as documented under
Documentation/networking/multique.txt and let applications dedice the switch
port output queue they want to use. Currently only Broadcom tags utilize that
information.

Changes in v2:
- use a proper define for the number of TX queues in bcm_sf2.c (Andrew)

Changes from RFC:

- dropped the ability to configure RX queues since we don't do anything with
  those just yet
- dropped the patches that dealt with binding the DSA slave network devices
  queues with their master network devices queues this will be worked on
  separately.

Florian Fainelli (4):
  net: dsa: Allow switch drivers to indicate number of TX queues
  net: dsa: tag_brcm: Set output queue from skb queue mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping

 drivers/net/dsa/bcm_sf2.c      | 14 +++++++++++++-
 drivers/net/dsa/bcm_sf2_regs.h |  3 +++
 include/net/dsa.h              |  3 +++
 net/dsa/slave.c                |  8 ++++++--
 net/dsa/tag_brcm.c             |  3 ++-
 5 files changed, 27 insertions(+), 4 deletions(-)

-- 
2.11.0