From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH net-next v2 03/12] net: dsa: b53: Defer port enabling to calling port_enable Date: Mon, 18 Sep 2017 19:19:38 -0700 Message-ID: <20170919021947.8971-4-f.fainelli@gmail.com> References: <20170919021947.8971-1-f.fainelli@gmail.com> Cc: andrew@lunn.ch, vivien.didelot@savoirfairelinux.com, davem@davemloft.net, Florian Fainelli To: netdev@vger.kernel.org Return-path: Received: from mail-wr0-f195.google.com ([209.85.128.195]:35584 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750974AbdISCUE (ORCPT ); Mon, 18 Sep 2017 22:20:04 -0400 Received: by mail-wr0-f195.google.com with SMTP id n64so1367963wrb.2 for ; Mon, 18 Sep 2017 19:20:03 -0700 (PDT) In-Reply-To: <20170919021947.8971-1-f.fainelli@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: There is no need to configure the enabled ports once in b53_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli --- drivers/net/dsa/b53/b53_common.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index d8bc54cfcfbe..3297af6aab8a 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -815,12 +815,13 @@ static int b53_setup(struct dsa_switch *ds) if (ret) dev_err(ds->dev, "failed to apply configuration\n"); + /* Configure IMP/CPU port, disable unused ports. Enabled + * ports will be configured with .port_enable + */ for (port = 0; port < dev->num_ports; port++) { - if (BIT(port) & ds->enabled_port_mask) - b53_enable_port(ds, port, NULL); - else if (dsa_is_cpu_port(ds, port)) + if (dsa_is_cpu_port(ds, port)) b53_enable_cpu_port(dev, port); - else + else if (!(BIT(port) & ds->enabled_port_mask)) b53_disable_port(ds, port, NULL); } -- 2.9.3