From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: andrew@lunn.ch, vivien.didelot@savoirfairelinux.com,
davem@davemloft.net, Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH net-next v2 06/12] net: dsa: b53: Move Broadcom header setup to b53
Date: Mon, 18 Sep 2017 19:19:41 -0700 [thread overview]
Message-ID: <20170919021947.8971-7-f.fainelli@gmail.com> (raw)
In-Reply-To: <20170919021947.8971-1-f.fainelli@gmail.com>
The code to enable Broadcom tags/headers is largely switch independent,
and in preparation for enabling it for multiple devices with b53, move
the code we have in bcm_sf2.c to b53_common.c
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 47 ++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/b53/b53_priv.h | 1 +
drivers/net/dsa/b53/b53_regs.h | 7 ++++++
drivers/net/dsa/bcm_sf2.c | 43 ++----------------------------------
drivers/net/dsa/bcm_sf2_regs.h | 8 -------
5 files changed, 57 insertions(+), 49 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3297af6aab8a..aa2187c71ea5 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,6 +538,53 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
}
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ u8 hdr_ctl, val;
+ u16 reg;
+
+ /* Resolve which bit controls the Broadcom tag */
+ switch (port) {
+ case 8:
+ val = BRCM_HDR_P8_EN;
+ break;
+ case 7:
+ val = BRCM_HDR_P7_EN;
+ break;
+ case 5:
+ val = BRCM_HDR_P5_EN;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ /* Enable Broadcom tags for IMP port */
+ b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
+ hdr_ctl |= val;
+ b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
+
+ /* Registers below are only accessible on newer devices */
+ if (!is58xx(dev))
+ return;
+
+ /* Enable reception Broadcom tag for CPU TX (switch RX) to
+ * allow us to tag outgoing frames
+ */
+ b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®);
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
+
+ /* Enable transmission of Broadcom tags from the switch (CPU RX) to
+ * allow delivering frames to the per-port net_devices
+ */
+ b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®);
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
+}
+EXPORT_SYMBOL(b53_brcm_hdr_setup);
+
static void b53_enable_cpu_port(struct b53_device *dev, int port)
{
u8 port_ctrl;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index f1136619e0e4..44297b7c3795 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -309,5 +309,6 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
void b53_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror);
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
#endif
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index e5c86d44667a..5e8b8e31fee8 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -210,6 +210,7 @@
#define B53_BRCM_HDR 0x03
#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */
#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */
+#define BRCM_HDR_P7_EN BIT(2) /* Enable tagging on port 7 */
/* Mirror capture control register (16 bit) */
#define B53_MIR_CAP_CTL 0x10
@@ -249,6 +250,12 @@
/* Revision ID register (8 bit) */
#define B53_REV_ID 0x40
+/* Broadcom header RX control (16 bit) */
+#define B53_BRCM_HDR_RX_DIS 0x60
+
+/* Broadcom header TX control (16 bit) */
+#define B53_BRCM_HDR_TX_DIS 0x62
+
/*************************************************************************
* ARL Access Page Registers
*************************************************************************/
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8acbd17bc1fd..49cb51223f70 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -60,45 +60,6 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
}
}
-static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port)
-{
- u32 reg, val;
-
- /* Resolve which bit controls the Broadcom tag */
- switch (port) {
- case 8:
- val = BRCM_HDR_EN_P8;
- break;
- case 7:
- val = BRCM_HDR_EN_P7;
- break;
- case 5:
- val = BRCM_HDR_EN_P5;
- break;
- default:
- val = 0;
- break;
- }
-
- /* Enable Broadcom tags for IMP port */
- reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
- reg |= val;
- core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
-
- /* Enable reception Broadcom tag for CPU TX (switch RX) to
- * allow us to tag outgoing frames
- */
- reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
-
- /* Enable transmission of Broadcom tags from the switch (CPU RX) to
- * allow delivering frames to the per-port net_devices
- */
- reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
-}
static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
@@ -138,7 +99,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
reg |= i << (PRT_TO_QID_SHIFT * i);
core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
- bcm_sf2_brcm_hdr_setup(priv, port);
+ b53_brcm_hdr_setup(ds, port);
/* Force link status for IMP port */
reg = core_readl(priv, offset);
@@ -247,7 +208,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
/* Enable Broadcom tags for that port if requested */
if (priv->brcm_tag_mask & BIT(port))
- bcm_sf2_brcm_hdr_setup(priv, port);
+ b53_brcm_hdr_setup(ds, port);
/* Configure Traffic Class to QoS mapping, allow each priority to map
* to a different queue number
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 49695fcc2ea8..788361ad68a0 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -205,16 +205,8 @@ enum bcm_sf2_reg_offs {
#define CORE_IMP0_PRT_ID 0x0804
-#define CORE_BRCM_HDR_CTRL 0x0080c
-#define BRCM_HDR_EN_P8 (1 << 0)
-#define BRCM_HDR_EN_P5 (1 << 1)
-#define BRCM_HDR_EN_P7 (1 << 2)
-
#define CORE_RST_MIB_CNT_EN 0x0950
-#define CORE_BRCM_HDR_RX_DIS 0x0980
-#define CORE_BRCM_HDR_TX_DIS 0x0988
-
#define CORE_ARLA_VTBL_RWCTRL 0x1600
#define ARLA_VTBL_CMD_WRITE 0
#define ARLA_VTBL_CMD_READ 1
--
2.9.3
next prev parent reply other threads:[~2017-09-19 2:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-19 2:19 [PATCH net-next v2 00/12] net: dsa: b53/bcm_sf2 cleanups Florian Fainelli
2017-09-19 2:19 ` [PATCH net-next v2 01/12] net: dsa: b53: Remove is_cpu_port() Florian Fainelli
2017-09-19 2:19 ` [PATCH net-next v2 02/12] net: dsa: b53: Make b53_enable_cpu_port() take a port argument Florian Fainelli
2017-09-19 2:19 ` [PATCH net-next v2 03/12] net: dsa: b53: Defer port enabling to calling port_enable Florian Fainelli
2017-09-19 2:19 ` [PATCH net-next v2 04/12] net: dsa: bcm_sf2: " Florian Fainelli
2017-09-19 2:19 ` [PATCH net-next v2 05/12] net: dsa: b53: Use a macro to define I/O operations Florian Fainelli
2017-09-19 2:19 ` Florian Fainelli [this message]
2017-09-19 2:19 ` [PATCH net-next v2 07/12] net: dsa: b53: Define EEE register page Florian Fainelli
2017-09-19 2:19 ` [PATCH net-next v2 08/12] net: dsa: b53: Move EEE functions to b53 Florian Fainelli
2017-09-19 14:34 ` Vivien Didelot
2017-09-19 2:19 ` [PATCH net-next v2 09/12] net: dsa: b53: Wire-up EEE Florian Fainelli
2017-09-19 14:37 ` Vivien Didelot
2017-09-19 2:19 ` [PATCH net-next v2 10/12] net: dsa: b53: Export b53_imp_vlan_setup() Florian Fainelli
2017-09-19 14:41 ` Vivien Didelot
2017-09-19 2:19 ` [PATCH net-next v2 11/12] net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP Florian Fainelli
2017-09-19 14:42 ` Vivien Didelot
2017-09-19 2:19 ` [PATCH net-next v2 12/12] net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port Florian Fainelli
2017-09-19 14:45 ` Vivien Didelot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170919021947.8971-7-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).