From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH net-next] Revert "net: dsa: bcm_sf2: Defer port enabling to calling port_enable" Date: Thu, 28 Sep 2017 11:19:06 -0700 Message-ID: <20170928181906.3156-1-f.fainelli@gmail.com> Cc: Florian Fainelli , Andrew Lunn , Vivien Didelot , linux-kernel@vger.kernel.org (open list) To: netdev@vger.kernel.org Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org This reverts commit e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") because this now makes an unbind followed by a bind to fail connecting to the ingrated PHY. What this patch missed is that we need the PHY to be enabled with bcm_sf2_gphy_enable_set() before probing it on the MDIO bus. This is correctly done in the ops->setup() function, but by the time ops->port_enable() runs, this is too late. Upon unbind we would power down the PHY, and so when we would bind again, the PHY would be left powered off. Fixes: e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") Signed-off-by: Florian Fainelli --- drivers/net/dsa/bcm_sf2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 898d5642b516..7aecc98d0a18 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -754,11 +754,14 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); unsigned int port; - /* Disable unused ports and configure IMP port */ + /* Enable all valid ports and disable those unused */ for (port = 0; port < priv->hw_params.num_ports; port++) { - if (dsa_is_cpu_port(ds, port)) + /* IMP port receives special treatment */ + if ((1 << port) & ds->enabled_port_mask) + bcm_sf2_port_setup(ds, port, NULL); + else if (dsa_is_cpu_port(ds, port)) bcm_sf2_imp_setup(ds, port); - else if (!((1 << port) & ds->enabled_port_mask)) + else bcm_sf2_port_disable(ds, port, NULL); } -- 2.9.3