netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jacob Keller <jacob.e.keller@intel.com>,
	netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
	jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 03/15] i40e/i40evf: spread CPU affinity hints across online CPUs only
Date: Fri,  6 Oct 2017 10:57:15 -0700	[thread overview]
Message-ID: <20171006175727.868-4-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <20171006175727.868-1-jeffrey.t.kirsher@intel.com>

From: Jacob Keller <jacob.e.keller@intel.com>

Currently, when setting up the IRQ for a q_vector, we set an affinity
hint based on the v_idx of that q_vector. Meaning a loop iterates on
v_idx, which is an incremental value, and the cpumask is created based
on this value.

This is a problem in systems with multiple logical CPUs per core (like in
simultaneous multithreading (SMT) scenarios). If we disable some logical
CPUs, by turning SMT off for example, we will end up with a sparse
cpu_online_mask, i.e., only the first CPU in a core is online, and
incremental filling in q_vector cpumask might lead to multiple offline
CPUs being assigned to q_vectors.

Example: if we have a system with 8 cores each one containing 8 logical
CPUs (SMT == 8 in this case), we have 64 CPUs in total. But if SMT is
disabled, only the 1st CPU in each core remains online, so the
cpu_online_mask in this case would have only 8 bits set, in a sparse way.

In general case, when SMT is off the cpu_online_mask has only C bits set:
0, 1*N, 2*N, ..., C*(N-1)  where
C == # of cores;
N == # of logical CPUs per core.
In our example, only bits 0, 8, 16, 24, 32, 40, 48, 56 would be set.

Instead, we should only assign hints for CPUs which are online. Even
better, the kernel already provides a function, cpumask_local_spread()
which takes an index and returns a CPU, spreading the interrupts across
local NUMA nodes first, and then remote ones if necessary.

Since we generally have a 1:1 mapping between vectors and CPUs, there
is no real advantage to spreading vectors to local CPUs first. In order
to avoid mismatch of the default XPS hints, we'll pass -1 so that it
spreads across all CPUs without regard to the node locality.

Note that we don't need to change the q_vector->affinity_mask as this is
initialized to cpu_possible_mask, until an actual affinity is set and
then notified back to us.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 16 +++++++++++-----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c |  9 ++++++---
 2 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index b539469f576f..d2bb4f17c89e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2885,14 +2885,15 @@ static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
 static void i40e_config_xps_tx_ring(struct i40e_ring *ring)
 {
 	struct i40e_vsi *vsi = ring->vsi;
+	int cpu;
 
 	if (!ring->q_vector || !ring->netdev)
 		return;
 
 	if ((vsi->tc_config.numtc <= 1) &&
 	    !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state)) {
-		netif_set_xps_queue(ring->netdev,
-				    get_cpu_mask(ring->q_vector->v_idx),
+		cpu = cpumask_local_spread(ring->q_vector->v_idx, -1);
+		netif_set_xps_queue(ring->netdev, get_cpu_mask(cpu),
 				    ring->queue_index);
 	}
 
@@ -3482,6 +3483,7 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
 	int tx_int_idx = 0;
 	int vector, err;
 	int irq_num;
+	int cpu;
 
 	for (vector = 0; vector < q_vectors; vector++) {
 		struct i40e_q_vector *q_vector = vsi->q_vectors[vector];
@@ -3517,10 +3519,14 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
 		q_vector->affinity_notify.notify = i40e_irq_affinity_notify;
 		q_vector->affinity_notify.release = i40e_irq_affinity_release;
 		irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify);
-		/* get_cpu_mask returns a static constant mask with
-		 * a permanent lifetime so it's ok to use here.
+		/* Spread affinity hints out across online CPUs.
+		 *
+		 * get_cpu_mask returns a static constant mask with
+		 * a permanent lifetime so it's ok to pass to
+		 * irq_set_affinity_hint without making a copy.
 		 */
-		irq_set_affinity_hint(irq_num, get_cpu_mask(q_vector->v_idx));
+		cpu = cpumask_local_spread(q_vector->v_idx, -1);
+		irq_set_affinity_hint(irq_num, get_cpu_mask(cpu));
 	}
 
 	vsi->irqs_ready = true;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index f2f1e754c2ce..bc76378a71e2 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -515,6 +515,7 @@ i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 	unsigned int vector, q_vectors;
 	unsigned int rx_int_idx = 0, tx_int_idx = 0;
 	int irq_num, err;
+	int cpu;
 
 	i40evf_irq_disable(adapter);
 	/* Decrement for Other and TCP Timer vectors */
@@ -553,10 +554,12 @@ i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 		q_vector->affinity_notify.release =
 						   i40evf_irq_affinity_release;
 		irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify);
-		/* get_cpu_mask returns a static constant mask with
-		 * a permanent lifetime so it's ok to use here.
+		/* Spread the IRQ affinity hints across online CPUs. Note that
+		 * get_cpu_mask returns a mask with a permanent lifetime so
+		 * it's safe to use as a hint for irq_set_affinity_hint.
 		 */
-		irq_set_affinity_hint(irq_num, get_cpu_mask(q_vector->v_idx));
+		cpu = cpumask_local_spread(q_vector->v_idx, -1);
+		irq_set_affinity_hint(irq_num, get_cpu_mask(cpu));
 	}
 
 	return 0;
-- 
2.14.2

  parent reply	other threads:[~2017-10-06 17:57 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-06 17:57 [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2017-10-06 Jeff Kirsher
2017-10-06 17:57 ` [net-next 01/15] i40e: fix a typo in i40e_pf documentation Jeff Kirsher
2017-10-06 17:57 ` [net-next 02/15] i40e: add private flag to control source pruning Jeff Kirsher
2017-10-06 17:57 ` Jeff Kirsher [this message]
2017-10-06 17:57 ` [net-next 04/15] i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0 Jeff Kirsher
2017-10-06 17:57 ` [net-next 05/15] i40e: redfine I40E_PHY_TYPE_MAX Jeff Kirsher
2017-10-06 17:57 ` [net-next 06/15] i40e: fix incorrect register definition Jeff Kirsher
2017-10-06 17:57 ` [net-next 07/15] i40e/i40evf: use DECLARE_BITMAP for state Jeff Kirsher
2017-10-06 17:57 ` [net-next 08/15] i40e: fix merge error Jeff Kirsher
2017-10-06 17:57 ` [net-next 09/15] i40e: Display error message if module does not meet thermal requirements Jeff Kirsher
2017-10-06 17:57 ` [net-next 10/15] i40e: Properly maintain flow director filters list Jeff Kirsher
2017-10-06 17:57 ` [net-next 11/15] i40e: implement split PCI error reset handler Jeff Kirsher
2017-10-06 17:57 ` [net-next 12/15] i40e: do not enter PHY debug mode while setting LEDs behaviour Jeff Kirsher
2017-10-06 17:57 ` [net-next 13/15] i40evf: enable support for VF VLAN tag stripping control Jeff Kirsher
2017-10-06 17:57 ` [net-next 14/15] i40e: ignore skb->xmit_more when deciding to set RS bit Jeff Kirsher
2017-10-09  9:07   ` David Laight
2017-10-09 16:28     ` Alexander Duyck
2017-10-09 20:10       ` Keller, Jacob E
2017-10-06 17:57 ` [net-next 15/15] i40e/i40evf: organize and re-number feature flags Jeff Kirsher
2017-10-06 22:41 ` [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2017-10-06 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171006175727.868-4-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=jacob.e.keller@intel.com \
    --cc=jogreene@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).