* [PATCH v3 2/3] net: phy: DP83822 initial driver submission
2017-10-09 12:03 [PATCH v3 1/3] net: phy: Remove TI DP83822 from DP83848 driver Dan Murphy
@ 2017-10-09 12:03 ` Dan Murphy
2017-10-09 16:27 ` Woojung.Huh
2017-10-09 12:03 ` [PATCH v3 3/3] net: phy: Change error to EINVAL for invalid MAC Dan Murphy
2017-10-09 16:44 ` [PATCH v3 1/3] net: phy: Remove TI DP83822 from DP83848 driver Florian Fainelli
2 siblings, 1 reply; 7+ messages in thread
From: Dan Murphy @ 2017-10-09 12:03 UTC (permalink / raw)
To: andrew, f.fainelli; +Cc: netdev, Woojung.Huh, afd, Dan Murphy
Add support for the TI DP83822 10/100Mbit ethernet phy.
The DP83822 provides flexibility to connect to a MAC through a
standard MII, RMII or RGMII interface.
Datasheet:
http://www.ti.com/product/DP83822I/datasheet
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v3 - Fixed WoL indication bit and removed mutex for suspend/resume -
https://www.mail-archive.com/netdev@vger.kernel.org/msg191891.html and
https://www.mail-archive.com/netdev@vger.kernel.org/msg191665.html
v2 - Updated per comments. Removed unnessary parantheis, called genphy_suspend/
resume routines and then performing WoL changes, reworked sopass storage and reduced
the number of phy reads, and moved WOL_SECURE_ON -
https://www.mail-archive.com/netdev@vger.kernel.org/msg191392.html
drivers/net/phy/Kconfig | 5 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83822.c | 302 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 308 insertions(+)
create mode 100644 drivers/net/phy/dp83822.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cd931cf9dcc2..8e78a482e09e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -277,6 +277,11 @@ config DAVICOM_PHY
---help---
Currently supports dm9161e and dm9131
+config DP83822_PHY
+ tristate "Texas Instruments DP83822 PHY"
+ ---help---
+ Supports the DP83822 PHY.
+
config DP83848_PHY
tristate "Texas Instruments DP83848 PHY"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 416df92fbf4f..df3b82ba8550 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_CORTINA_PHY) += cortina.o
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o
+obj-$(CONFIG_DP83822_PHY) += dp83822.o
obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
new file mode 100644
index 000000000000..de196dbc46cd
--- /dev/null
+++ b/drivers/net/phy/dp83822.c
@@ -0,0 +1,302 @@
+/*
+ * Driver for the Texas Instruments DP83822 PHY
+ *
+ * Copyright (C) 2017 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83822_PHY_ID 0x2000a240
+#define DP83822_DEVADDR 0x1f
+
+#define MII_DP83822_MISR1 0x12
+#define MII_DP83822_MISR2 0x13
+#define MII_DP83822_RESET_CTRL 0x1f
+
+#define DP83822_HW_RESET BIT(15)
+#define DP83822_SW_RESET BIT(14)
+
+/* MISR1 bits */
+#define DP83822_RX_ERR_HF_INT_EN BIT(0)
+#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1)
+#define DP83822_ANEG_COMPLETE_INT_EN BIT(2)
+#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3)
+#define DP83822_SPEED_CHANGED_INT_EN BIT(4)
+#define DP83822_LINK_STAT_INT_EN BIT(5)
+#define DP83822_ENERGY_DET_INT_EN BIT(6)
+#define DP83822_LINK_QUAL_INT_EN BIT(7)
+
+/* MISR2 bits */
+#define DP83822_JABBER_DET_INT_EN BIT(0)
+#define DP83822_WOL_PKT_INT_EN BIT(1)
+#define DP83822_SLEEP_MODE_INT_EN BIT(2)
+#define DP83822_MDI_XOVER_INT_EN BIT(3)
+#define DP83822_LB_FIFO_INT_EN BIT(4)
+#define DP83822_PAGE_RX_INT_EN BIT(5)
+#define DP83822_ANEG_ERR_INT_EN BIT(6)
+#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7)
+
+/* INT_STAT1 bits */
+#define DP83822_WOL_INT_EN BIT(4)
+#define DP83822_WOL_INT_STAT BIT(12)
+
+#define MII_DP83822_RXSOP1 0x04a5
+#define MII_DP83822_RXSOP2 0x04a6
+#define MII_DP83822_RXSOP3 0x04a7
+
+/* WoL Registers */
+#define MII_DP83822_WOL_CFG 0x04a0
+#define MII_DP83822_WOL_STAT 0x04a1
+#define MII_DP83822_WOL_DA1 0x04a2
+#define MII_DP83822_WOL_DA2 0x04a3
+#define MII_DP83822_WOL_DA3 0x04a4
+
+/* WoL bits */
+#define DP83822_WOL_MAGIC_EN BIT(1)
+#define DP83822_WOL_SECURE_ON BIT(5)
+#define DP83822_WOL_EN BIT(7)
+#define DP83822_WOL_INDICATION_SEL BIT(8)
+#define DP83822_WOL_CLR_INDICATION BIT(11)
+
+static int dp83822_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DP83822_MISR1);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_DP83822_MISR2);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83822_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ u16 value;
+ const u8 *mac;
+
+ if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+ mac = (const u8 *)ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return -EINVAL;
+
+ /* MAC addresses start with byte 5, but stored in mac[0].
+ * 822 PHYs store bytes 4|5, 2|3, 0|1
+ */
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_WOL_DA1, (mac[1] << 8) | mac[0]);
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_WOL_DA2, (mac[3] << 8) | mac[2]);
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
+ (mac[5] << 8) | mac[4]);
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_WOL_CFG);
+ if (wol->wolopts & WAKE_MAGIC)
+ value |= DP83822_WOL_MAGIC_EN;
+ else
+ value &= ~DP83822_WOL_MAGIC_EN;
+
+ if (wol->wolopts & WAKE_MAGICSECURE) {
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP1,
+ (wol->sopass[1] << 8) | wol->sopass[0]);
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP2,
+ (wol->sopass[3] << 8) | wol->sopass[2]);
+ phy_write_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_RXSOP3,
+ (wol->sopass[5] << 8) | wol->sopass[4]);
+ value |= DP83822_WOL_SECURE_ON;
+ } else {
+ value &= ~DP83822_WOL_SECURE_ON;
+ }
+
+ value |= (DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
+ DP83822_WOL_CLR_INDICATION);
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
+ value);
+ } else {
+ value = phy_read_mmd(phydev, DP83822_DEVADDR,
+ MII_DP83822_WOL_CFG);
+ value &= ~DP83822_WOL_EN;
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
+ value);
+ }
+
+ return 0;
+}
+
+static void dp83822_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ int value;
+ u16 sopass_val;
+
+ wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
+ wol->wolopts = 0;
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+ if (value & DP83822_WOL_MAGIC_EN)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (~value & DP83822_WOL_CLR_INDICATION)
+ wol->wolopts = 0;
+
+ if (value & DP83822_WOL_SECURE_ON) {
+ wol->wolopts |= WAKE_MAGICSECURE;
+ } else {
+ wol->wolopts &= ~WAKE_MAGICSECURE;
+ return;
+ }
+
+ sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RXSOP1);
+ wol->sopass[0] = (sopass_val & 0xff);
+ wol->sopass[1] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RXSOP2);
+ wol->sopass[2] = (sopass_val & 0xff);
+ wol->sopass[3] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RXSOP3);
+ wol->sopass[4] = (sopass_val & 0xff);
+ wol->sopass[5] = (sopass_val >> 8);
+}
+
+static int dp83822_config_intr(struct phy_device *phydev)
+{
+ int misr_status;
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ misr_status = phy_read(phydev, MII_DP83822_MISR1);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83822_RX_ERR_HF_INT_EN |
+ DP83822_FALSE_CARRIER_HF_INT_EN |
+ DP83822_ANEG_COMPLETE_INT_EN |
+ DP83822_DUP_MODE_CHANGE_INT_EN |
+ DP83822_SPEED_CHANGED_INT_EN |
+ DP83822_LINK_STAT_INT_EN |
+ DP83822_ENERGY_DET_INT_EN |
+ DP83822_LINK_QUAL_INT_EN);
+
+ err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
+ if (err < 0)
+ return err;
+
+ misr_status = phy_read(phydev, MII_DP83822_MISR2);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83822_JABBER_DET_INT_EN |
+ DP83822_WOL_PKT_INT_EN |
+ DP83822_SLEEP_MODE_INT_EN |
+ DP83822_MDI_XOVER_INT_EN |
+ DP83822_LB_FIFO_INT_EN |
+ DP83822_PAGE_RX_INT_EN |
+ DP83822_ANEG_ERR_INT_EN |
+ DP83822_EEE_ERROR_CHANGE_INT_EN);
+
+ err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
+ } else {
+ err = phy_write(phydev, MII_DP83822_MISR1, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_DP83822_MISR1, 0);
+ }
+
+ return err;
+}
+
+static int dp83822_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83822_suspend(struct phy_device *phydev)
+{
+ int value;
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+ if (!(value & DP83822_WOL_EN))
+ genphy_suspend(phydev);
+
+ return 0;
+}
+
+static int dp83822_resume(struct phy_device *phydev)
+{
+ int value;
+
+ genphy_resume(phydev);
+
+ value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+ phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
+ DP83822_WOL_CLR_INDICATION);
+
+
+ return 0;
+}
+
+static struct phy_driver dp83822_driver[] = {
+ {
+ .phy_id = DP83822_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83822",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = genphy_config_init,
+ .soft_reset = dp83822_phy_reset,
+ .get_wol = dp83822_get_wol,
+ .set_wol = dp83822_set_wol,
+ .ack_interrupt = dp83822_ack_interrupt,
+ .config_intr = dp83822_config_intr,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = dp83822_suspend,
+ .resume = dp83822_resume,
+ },
+};
+module_phy_driver(dp83822_driver);
+
+static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
+ { DP83822_PHY_ID, 0xfffffff0 },
+ { },
+};
+MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL");
--
2.14.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v3 1/3] net: phy: Remove TI DP83822 from DP83848 driver
2017-10-09 12:03 [PATCH v3 1/3] net: phy: Remove TI DP83822 from DP83848 driver Dan Murphy
2017-10-09 12:03 ` [PATCH v3 2/3] net: phy: DP83822 initial driver submission Dan Murphy
2017-10-09 12:03 ` [PATCH v3 3/3] net: phy: Change error to EINVAL for invalid MAC Dan Murphy
@ 2017-10-09 16:44 ` Florian Fainelli
2017-10-09 16:45 ` Dan Murphy
2 siblings, 1 reply; 7+ messages in thread
From: Florian Fainelli @ 2017-10-09 16:44 UTC (permalink / raw)
To: Dan Murphy, andrew; +Cc: netdev, Woojung.Huh, afd
On 10/09/2017 05:03 AM, Dan Murphy wrote:
> Removing the DP83822 device from the DP83848 to
> support the TI DP83822 dedicated driver that will
> initially support WoL settings.
Hi Dan,
The ordering of patch 1 and 2 may have to be reversed, otherwise you are
leaving people with the Generic PHY driver matching the DP83822 PHY
after applying patch 1, and without proper interrupt management again
unless they apply patch 2.
It may even be better to combine patch 1 and 2 actually to have a
cleaner transition.
Sorry for noticing this so late in the series...
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v3 - No changes made
> v2 - There was no v1 on this patch this is new.
>
> drivers/net/phy/dp83848.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
> index 3de4fe4dda77..3966d43c5146 100644
> --- a/drivers/net/phy/dp83848.c
> +++ b/drivers/net/phy/dp83848.c
> @@ -20,7 +20,6 @@
> #define TI_DP83620_PHY_ID 0x20005ce0
> #define NS_DP83848C_PHY_ID 0x20005c90
> #define TLK10X_PHY_ID 0x2000a210
> -#define TI_DP83822_PHY_ID 0x2000a240
>
> /* Registers */
> #define DP83848_MICR 0x11 /* MII Interrupt Control Register */
> @@ -80,7 +79,6 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
> { NS_DP83848C_PHY_ID, 0xfffffff0 },
> { TI_DP83620_PHY_ID, 0xfffffff0 },
> { TLK10X_PHY_ID, 0xfffffff0 },
> - { TI_DP83822_PHY_ID, 0xfffffff0 },
> { }
> };
> MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
> @@ -110,7 +108,6 @@ static struct phy_driver dp83848_driver[] = {
> DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY"),
> DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY"),
> DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
> - DP83848_PHY_DRIVER(TI_DP83822_PHY_ID, "TI DP83822 10/100 Mbps PHY"),
> };
> module_phy_driver(dp83848_driver);
>
>
--
Florian
^ permalink raw reply [flat|nested] 7+ messages in thread