From: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel@savoirfairelinux.com,
"David S. Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Subject: [PATCH net-next v2 1/4] net: dsa: mv88e6xxx: setup random mac address
Date: Thu, 12 Oct 2017 21:41:10 -0400 [thread overview]
Message-ID: <20171013014113.29561-2-vivien.didelot@savoirfairelinux.com> (raw)
In-Reply-To: <20171013014113.29561-1-vivien.didelot@savoirfairelinux.com>
An Ethernet switch may support having a MAC address, which can be used
as the switch's source address in transmitted full-duplex Pause frames.
If a DSA switch supports the related .set_addr operation, the DSA core
sets the master's MAC address on the switch. This won't make sense
anymore in a multi-CPU ports system, because there won't be a unique
master device assigned to a switch tree.
Instead, setup the switch from within the Marvell driver with a random
MAC address, and remove the .set_addr implementation.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index d74c7335c512..76cf383dcf90 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -932,6 +932,19 @@ static int mv88e6xxx_irl_setup(struct mv88e6xxx_chip *chip)
return 0;
}
+static int mv88e6xxx_mac_setup(struct mv88e6xxx_chip *chip)
+{
+ if (chip->info->ops->set_switch_mac) {
+ u8 addr[ETH_ALEN];
+
+ eth_random_addr(addr);
+
+ return chip->info->ops->set_switch_mac(chip, addr);
+ }
+
+ return 0;
+}
+
static int mv88e6xxx_pvt_map(struct mv88e6xxx_chip *chip, int dev, int port)
{
u16 pvlan = 0;
@@ -2013,6 +2026,10 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
if (err)
goto unlock;
+ err = mv88e6xxx_mac_setup(chip);
+ if (err)
+ goto unlock;
+
err = mv88e6xxx_phy_setup(chip);
if (err)
goto unlock;
@@ -2043,21 +2060,6 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
return err;
}
-static int mv88e6xxx_set_addr(struct dsa_switch *ds, u8 *addr)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int err;
-
- if (!chip->info->ops->set_switch_mac)
- return -EOPNOTSUPP;
-
- mutex_lock(&chip->reg_lock);
- err = chip->info->ops->set_switch_mac(chip, addr);
- mutex_unlock(&chip->reg_lock);
-
- return err;
-}
-
static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
{
struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
@@ -3785,7 +3787,6 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
.probe = mv88e6xxx_drv_probe,
.get_tag_protocol = mv88e6xxx_get_tag_protocol,
.setup = mv88e6xxx_setup,
- .set_addr = mv88e6xxx_set_addr,
.adjust_link = mv88e6xxx_adjust_link,
.get_strings = mv88e6xxx_get_strings,
.get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
--
2.14.2
next prev parent reply other threads:[~2017-10-13 1:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-13 1:41 [PATCH net-next v2 0/4] net: dsa: remove .set_addr Vivien Didelot
2017-10-13 1:41 ` Vivien Didelot [this message]
2017-10-13 1:41 ` [PATCH net-next v2 2/4] net: dsa: mv88e6060: setup random mac address Vivien Didelot
2017-10-13 15:30 ` David Laight
2017-10-13 16:02 ` Woojung.Huh
2017-10-13 16:44 ` Vivien Didelot
2017-10-13 17:59 ` Woojung.Huh
2017-10-16 9:02 ` David Laight
2017-10-13 1:41 ` [PATCH net-next v2 3/4] net: dsa: dsa_loop: remove .set_addr Vivien Didelot
2017-10-13 1:41 ` [PATCH net-next v2 4/4] net: dsa: " Vivien Didelot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171013014113.29561-2-vivien.didelot@savoirfairelinux.com \
--to=vivien.didelot@savoirfairelinux.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kernel@savoirfairelinux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox