Netdev List
 help / color / mirror / Atom feed
From: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel@savoirfairelinux.com,
	"David S. Miller" <davem@davemloft.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	David Laight <David.Laight@ACULAB.COM>,
	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Subject: [PATCH net-next v3 3/5] net: dsa: mv88e6060: setup random mac address
Date: Fri, 13 Oct 2017 14:18:07 -0400	[thread overview]
Message-ID: <20171013181809.14627-4-vivien.didelot@savoirfairelinux.com> (raw)
In-Reply-To: <20171013181809.14627-1-vivien.didelot@savoirfairelinux.com>

As for mv88e6xxx, setup the switch from within the mv88e6060 driver with
a random MAC address, and remove the .set_addr implementation.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/mv88e6060.c | 43 ++++++++++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index d64be2b83d3c..6173be889d95 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/etherdevice.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -188,6 +189,27 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
 	return 0;
 }
 
+static int mv88e6060_setup_addr(struct dsa_switch *ds)
+{
+	u8 addr[ETH_ALEN];
+	u16 val;
+
+	eth_random_addr(addr);
+
+	val = addr[0] << 8 | addr[1];
+
+	/* The multicast bit is always transmitted as a zero, so the switch uses
+	 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
+	 */
+	val &= 0xfeff;
+
+	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
+	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
+	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
+
+	return 0;
+}
+
 static int mv88e6060_setup(struct dsa_switch *ds)
 {
 	int ret;
@@ -203,6 +225,10 @@ static int mv88e6060_setup(struct dsa_switch *ds)
 	if (ret < 0)
 		return ret;
 
+	ret = mv88e6060_setup_addr(ds);
+	if (ret < 0)
+		return ret;
+
 	for (i = 0; i < MV88E6060_PORTS; i++) {
 		ret = mv88e6060_setup_port(ds, i);
 		if (ret < 0)
@@ -212,22 +238,6 @@ static int mv88e6060_setup(struct dsa_switch *ds)
 	return 0;
 }
 
-static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
-{
-	u16 val = addr[0] << 8 | addr[1];
-
-	/* The multicast bit is always transmitted as a zero, so the switch uses
-	 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
-	 */
-	val &= 0xfeff;
-
-	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
-	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
-	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
-
-	return 0;
-}
-
 static int mv88e6060_port_to_phy_addr(int port)
 {
 	if (port >= 0 && port < MV88E6060_PORTS)
@@ -262,7 +272,6 @@ static const struct dsa_switch_ops mv88e6060_switch_ops = {
 	.get_tag_protocol = mv88e6060_get_tag_protocol,
 	.probe		= mv88e6060_drv_probe,
 	.setup		= mv88e6060_setup,
-	.set_addr	= mv88e6060_set_addr,
 	.phy_read	= mv88e6060_phy_read,
 	.phy_write	= mv88e6060_phy_write,
 };
-- 
2.14.2

  parent reply	other threads:[~2017-10-13 18:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-13 18:18 [PATCH net-next v3 0/5] net: dsa: remove .set_addr Vivien Didelot
2017-10-13 18:18 ` [PATCH net-next v3 1/5] net: dsa: mv88e6xxx: setup random mac address Vivien Didelot
2017-10-13 18:18 ` [PATCH net-next v3 2/5] net: dsa: mv88e6060: fix switch MAC address Vivien Didelot
2017-10-13 18:18 ` Vivien Didelot [this message]
2017-10-16  9:05   ` [PATCH net-next v3 3/5] net: dsa: mv88e6060: setup random mac address David Laight
2017-10-13 18:18 ` [PATCH net-next v3 4/5] net: dsa: dsa_loop: remove .set_addr Vivien Didelot
2017-10-13 18:18 ` [PATCH net-next v3 5/5] net: dsa: " Vivien Didelot
2017-10-15  1:30 ` [PATCH net-next v3 0/5] " David Miller
2017-10-16 15:23 ` Rodney Cummings
2017-10-16 16:09   ` Andrew Lunn
2017-10-16 16:28     ` Rodney Cummings
2017-10-16 16:47       ` Andrew Lunn
2017-10-16 16:52         ` Rodney Cummings
2017-10-16 16:57           ` Andrew Lunn
2017-10-16 18:14             ` Rodney Cummings
2017-10-16 16:30     ` David Laight
2017-10-16 16:44       ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171013181809.14627-4-vivien.didelot@savoirfairelinux.com \
    --to=vivien.didelot@savoirfairelinux.com \
    --cc=David.Laight@ACULAB.COM \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kernel@savoirfairelinux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox