Re: [PATCH v1 RFC 6/7] Add MIB counter reading support

[Andrew Lunn <andrew@lunn.ch>]

> +static void ksz9477_phy_setup(struct ksz_device *dev, int port,
> +			      struct phy_device *phy)
> +{
> +	if (port < dev->phy_port_cnt) {
> +		/* SUPPORTED_Asym_Pause and SUPPORTED_Pause can be removed to
> +		 * disable flow control when rate limiting is used.
> +		 */
> +		phy->advertising = phy->supported;
> +	}
> +}
> +

This has nothing to do with MIBs. It does not belong in this patch.

>  static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
>  {
>  	u8 data8;
> @@ -1159,6 +1198,8 @@ static int ksz9477_setup(struct dsa_switch *ds)
>  	/* start switch */
>  	ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
>  
> +	ksz_init_mib_timer(dev);
> +
>  	return 0;
>  }
>  
> @@ -1168,6 +1209,7 @@ static int ksz9477_setup(struct dsa_switch *ds)
>  	.set_addr		= ksz9477_set_addr,
>  	.phy_read		= ksz9477_phy_read16,
>  	.phy_write		= ksz9477_phy_write16,
> +	.adjust_link		= ksz_adjust_link,

Please move the adjust_link changes into a separate patch.

I need to come back at look at the mutex's and the freeze code. It is
not obviously correct, and i don't have the time at the moment.

       Andrew