[PATCH v3 0/6] adapt DPAA drivers for DSA

[PATCH v3 0/6] adapt DPAA drivers for DSA

[Madalin Bucur]

Junote Cai reported that he was not able to get a DSA setup involving the
DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node()
call in DSA setup. The initial attempt to fix this by adding of_node to the
platform device results in a second, failed, probing of the FMan MAC driver
against the new platform device created for the DPAA Ethernet driver.
Solve these issues by removing the of_node pointer from the platform device
and changing the net_dev dev to the of_device dev to ensure the DSA init
will be able to find the DPAA net_dev using of_find_net_device_by_node().
Several changes were required to enable this solution: refactoring the
adjust_link (also resulted in lesser, cleaner code) and renaming the fman
kernel modules to keep the legacy udev rules happy.

Changes in v2:

 - fix issue on error path in "dpaa_eth: change device used" patch
 - cleanup the dpaa_eth_probe() error paths

Changes in v3:

 - remove obsolete comment in moved code
 - add explanation for module rename

Madalin Bucur (6):
  fsl/fman: remove of_node
  dpaa_eth: move of_phy_connect() to the eth driver
  dpaa_eth: change device used
  dpaa_eth: cleanup dpaa_eth_probe() error paths
  fsl/fman: add dpaa in module names
  dpaa_eth: remove obsolete comment

 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 139 +++++++++++++------------
 drivers/net/ethernet/freescale/fman/Makefile   |  12 +--
 drivers/net/ethernet/freescale/fman/mac.c      | 135 +++++++-----------------
 drivers/net/ethernet/freescale/fman/mac.h      |   6 +-
 4 files changed, 115 insertions(+), 177 deletions(-)

-- 
2.1.0

[PATCH v3 1/6] fsl/fman: remove of_node

[Madalin Bucur]

The FMan MAC driver allocates a platform device for the Ethernet
driver to probe on. Setting pdev->dev.of_node with the MAC node
triggers the MAC driver probing of the new platform device. While
this fails quickly and does not affect the functionality of the
drivers, it is incorrect and must be removed. This was added to
address a report that DSA code using of_find_net_device_by_node()
is unable to use the DPAA interfaces. Error message seen before
this fix:

fsl_mac dpaa-ethernet.0: __devm_request_mem_region(mac) failed
fsl_mac: probe of dpaa-ethernet.0 failed with error -16

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/fman/mac.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 387eb4a..9a265f8 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -623,7 +623,6 @@ static struct platform_device *dpaa_eth_add_device(int fman_id,
 		goto no_mem;
 	}
 
-	pdev->dev.of_node = node;
 	pdev->dev.parent = priv->dev;
 	set_dma_ops(&pdev->dev, get_dma_ops(priv->dev));
 
-- 
2.1.0

[PATCH v3 2/6] dpaa_eth: move of_phy_connect() to the eth driver

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 48 +++++++++++--
 drivers/net/ethernet/freescale/fman/mac.c      | 97 ++++++--------------------
 drivers/net/ethernet/freescale/fman/mac.h      |  5 +-
 3 files changed, 66 insertions(+), 84 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 4225806..7cf61d6 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2435,6 +2435,48 @@ static void dpaa_eth_napi_disable(struct dpaa_priv *priv)
 	}
 }
 
+static void dpaa_adjust_link(struct net_device *net_dev)
+{
+	struct mac_device *mac_dev;
+	struct dpaa_priv *priv;
+
+	priv = netdev_priv(net_dev);
+	mac_dev = priv->mac_dev;
+	mac_dev->adjust_link(mac_dev);
+}
+
+static int dpaa_phy_init(struct net_device *net_dev)
+{
+	struct mac_device *mac_dev;
+	struct phy_device *phy_dev;
+	struct dpaa_priv *priv;
+
+	priv = netdev_priv(net_dev);
+	mac_dev = priv->mac_dev;
+
+	phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
+				 &dpaa_adjust_link, 0,
+				 mac_dev->phy_if);
+	if (!phy_dev) {
+		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
+		return -ENODEV;
+	}
+
+	/* Remove any features not supported by the controller */
+	phy_dev->supported &= mac_dev->if_support;
+
+	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
+	 * as most of the PHY drivers do not enable them by default.
+	 */
+	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+	phy_dev->advertising = phy_dev->supported;
+
+	mac_dev->phy_dev = phy_dev;
+	net_dev->phydev = phy_dev;
+
+	return 0;
+}
+
 static int dpaa_open(struct net_device *net_dev)
 {
 	struct mac_device *mac_dev;
@@ -2445,12 +2487,8 @@ static int dpaa_open(struct net_device *net_dev)
 	mac_dev = priv->mac_dev;
 	dpaa_eth_napi_enable(priv);
 
-	net_dev->phydev = mac_dev->init_phy(net_dev, priv->mac_dev);
-	if (!net_dev->phydev) {
-		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
-		err = -ENODEV;
+	if (dpaa_phy_init(net_dev))
 		goto phy_init_failed;
-	}
 
 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
 		err = fman_port_enable(mac_dev->port[i]);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 9a265f8..a0a3107 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -57,9 +57,7 @@ struct mac_priv_s {
 	struct device			*dev;
 	void __iomem			*vaddr;
 	u8				cell_index;
-	phy_interface_t			phy_if;
 	struct fman			*fman;
-	struct device_node		*phy_node;
 	struct device_node		*internal_phy_node;
 	/* List of multicast addresses */
 	struct list_head		mc_addr_list;
@@ -106,7 +104,7 @@ static void set_fman_mac_params(struct mac_device *mac_dev,
 			     resource_size(mac_dev->res));
 	memcpy(&params->addr, mac_dev->addr, sizeof(mac_dev->addr));
 	params->max_speed	= priv->max_speed;
-	params->phy_if		= priv->phy_if;
+	params->phy_if		= mac_dev->phy_if;
 	params->basex_if	= false;
 	params->mac_id		= priv->cell_index;
 	params->fm		= (void *)priv->fman;
@@ -419,15 +417,12 @@ void fman_get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause,
 }
 EXPORT_SYMBOL(fman_get_pause_cfg);
 
-static void adjust_link_void(struct net_device *net_dev)
+static void adjust_link_void(struct mac_device *mac_dev)
 {
 }
 
-static void adjust_link_dtsec(struct net_device *net_dev)
+static void adjust_link_dtsec(struct mac_device *mac_dev)
 {
-	struct device *dev = net_dev->dev.parent;
-	struct dpaa_eth_data *eth_data = dev->platform_data;
-	struct mac_device *mac_dev = eth_data->mac_dev;
 	struct phy_device *phy_dev = mac_dev->phy_dev;
 	struct fman_mac *fman_mac;
 	bool rx_pause, tx_pause;
@@ -444,14 +439,12 @@ static void adjust_link_dtsec(struct net_device *net_dev)
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
 	if (err < 0)
-		netdev_err(net_dev, "fman_set_mac_active_pause() = %d\n", err);
+		dev_err(mac_dev->priv->dev, "fman_set_mac_active_pause() = %d\n",
+			err);
 }
 
-static void adjust_link_memac(struct net_device *net_dev)
+static void adjust_link_memac(struct mac_device *mac_dev)
 {
-	struct device *dev = net_dev->dev.parent;
-	struct dpaa_eth_data *eth_data = dev->platform_data;
-	struct mac_device *mac_dev = eth_data->mac_dev;
 	struct phy_device *phy_dev = mac_dev->phy_dev;
 	struct fman_mac *fman_mac;
 	bool rx_pause, tx_pause;
@@ -463,60 +456,12 @@ static void adjust_link_memac(struct net_device *net_dev)
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
 	if (err < 0)
-		netdev_err(net_dev, "fman_set_mac_active_pause() = %d\n", err);
-}
-
-/* Initializes driver's PHY state, and attaches to the PHY.
- * Returns 0 on success.
- */
-static struct phy_device *init_phy(struct net_device *net_dev,
-				   struct mac_device *mac_dev,
-				   void (*adj_lnk)(struct net_device *))
-{
-	struct phy_device	*phy_dev;
-	struct mac_priv_s	*priv = mac_dev->priv;
-
-	phy_dev = of_phy_connect(net_dev, priv->phy_node, adj_lnk, 0,
-				 priv->phy_if);
-	if (!phy_dev) {
-		netdev_err(net_dev, "Could not connect to PHY\n");
-		return NULL;
-	}
-
-	/* Remove any features not supported by the controller */
-	phy_dev->supported &= mac_dev->if_support;
-	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-	 * as most of the PHY drivers do not enable them by default.
-	 */
-	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-	phy_dev->advertising = phy_dev->supported;
-
-	mac_dev->phy_dev = phy_dev;
-
-	return phy_dev;
-}
-
-static struct phy_device *dtsec_init_phy(struct net_device *net_dev,
-					 struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, &adjust_link_dtsec);
-}
-
-static struct phy_device *tgec_init_phy(struct net_device *net_dev,
-					struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, adjust_link_void);
-}
-
-static struct phy_device *memac_init_phy(struct net_device *net_dev,
-					 struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, &adjust_link_memac);
+		dev_err(mac_dev->priv->dev, "fman_set_mac_active_pause() = %d\n",
+			err);
 }
 
 static void setup_dtsec(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= dtsec_init_phy;
 	mac_dev->init			= dtsec_initialization;
 	mac_dev->set_promisc		= dtsec_set_promiscuous;
 	mac_dev->change_addr		= dtsec_modify_mac_address;
@@ -528,14 +473,13 @@ static void setup_dtsec(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_dtsec;
 	mac_dev->priv->enable		= dtsec_enable;
 	mac_dev->priv->disable		= dtsec_disable;
 }
 
 static void setup_tgec(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= tgec_init_phy;
 	mac_dev->init			= tgec_initialization;
 	mac_dev->set_promisc		= tgec_set_promiscuous;
 	mac_dev->change_addr		= tgec_modify_mac_address;
@@ -547,14 +491,13 @@ static void setup_tgec(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_void;
 	mac_dev->priv->enable		= tgec_enable;
 	mac_dev->priv->disable		= tgec_disable;
 }
 
 static void setup_memac(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= memac_init_phy;
 	mac_dev->init			= memac_initialization;
 	mac_dev->set_promisc		= memac_set_promiscuous;
 	mac_dev->change_addr		= memac_modify_mac_address;
@@ -566,7 +509,7 @@ static void setup_memac(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_memac;
 	mac_dev->priv->enable		= memac_enable;
 	mac_dev->priv->disable		= memac_disable;
 }
@@ -850,13 +793,13 @@ static int mac_probe(struct platform_device *_of_dev)
 			 mac_node);
 		phy_if = PHY_INTERFACE_MODE_SGMII;
 	}
-	priv->phy_if = phy_if;
+	mac_dev->phy_if = phy_if;
 
-	priv->speed		= phy2speed[priv->phy_if];
+	priv->speed		= phy2speed[mac_dev->phy_if];
 	priv->max_speed		= priv->speed;
 	mac_dev->if_support	= DTSEC_SUPPORTED;
 	/* We don't support half-duplex in SGMII mode */
-	if (priv->phy_if == PHY_INTERFACE_MODE_SGMII)
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII)
 		mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
 					SUPPORTED_100baseT_Half);
 
@@ -865,12 +808,12 @@ static int mac_probe(struct platform_device *_of_dev)
 		mac_dev->if_support |= SUPPORTED_1000baseT_Full;
 
 	/* The 10G interface only supports one mode */
-	if (priv->phy_if == PHY_INTERFACE_MODE_XGMII)
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
 		mac_dev->if_support = SUPPORTED_10000baseT_Full;
 
 	/* Get the rest of the PHY information */
-	priv->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
-	if (!priv->phy_node && of_phy_is_fixed_link(mac_node)) {
+	mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
+	if (!mac_dev->phy_node && of_phy_is_fixed_link(mac_node)) {
 		struct phy_device *phy;
 
 		err = of_phy_register_fixed_link(mac_node);
@@ -884,8 +827,8 @@ static int mac_probe(struct platform_device *_of_dev)
 			goto _return_dev_set_drvdata;
 		}
 
-		priv->phy_node = of_node_get(mac_node);
-		phy = of_phy_find_device(priv->phy_node);
+		mac_dev->phy_node = of_node_get(mac_node);
+		phy = of_phy_find_device(mac_dev->phy_node);
 		if (!phy) {
 			err = -EINVAL;
 			goto _return_dev_set_drvdata;
@@ -903,7 +846,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	err = mac_dev->init(mac_dev);
 	if (err < 0) {
 		dev_err(dev, "mac_dev->init() = %d\n", err);
-		of_node_put(priv->phy_node);
+		of_node_put(mac_dev->phy_node);
 		goto _return_dev_set_drvdata;
 	}
 
diff --git a/drivers/net/ethernet/freescale/fman/mac.h b/drivers/net/ethernet/freescale/fman/mac.h
index d7313f0..1ca85a1 100644
--- a/drivers/net/ethernet/freescale/fman/mac.h
+++ b/drivers/net/ethernet/freescale/fman/mac.h
@@ -50,6 +50,8 @@ struct mac_device {
 	struct fman_port	*port[2];
 	u32			 if_support;
 	struct phy_device	*phy_dev;
+	phy_interface_t		phy_if;
+	struct device_node	*phy_node;
 
 	bool autoneg_pause;
 	bool rx_pause_req;
@@ -58,11 +60,10 @@ struct mac_device {
 	bool tx_pause_active;
 	bool promisc;
 
-	struct phy_device *(*init_phy)(struct net_device *net_dev,
-				       struct mac_device *mac_dev);
 	int (*init)(struct mac_device *mac_dev);
 	int (*start)(struct mac_device *mac_dev);
 	int (*stop)(struct mac_device *mac_dev);
+	void (*adjust_link)(struct mac_device *mac_dev);
 	int (*set_promisc)(struct fman_mac *mac_dev, bool enable);
 	int (*change_addr)(struct fman_mac *mac_dev, enet_addr_t *enet_addr);
 	int (*set_multi)(struct net_device *net_dev,
-- 
2.1.0

[PATCH v3 3/6] dpaa_eth: change device used

[Madalin Bucur]

Change device used for DMA mapping to the MAC device that is an
of_device, with proper DMA ops. Using this device for the netdevice
should also address the issue with DSA scenarios that need the
netdevice to be backed by an of_device.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 42 ++++++++------------------
 drivers/net/ethernet/freescale/fman/mac.c      | 37 +++++++++--------------
 drivers/net/ethernet/freescale/fman/mac.h      |  1 -
 3 files changed, 27 insertions(+), 53 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 7cf61d6..823aa65 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -385,34 +385,19 @@ static int dpaa_setup_tc(struct net_device *net_dev, enum tc_setup_type type,
 
 static struct mac_device *dpaa_mac_dev_get(struct platform_device *pdev)
 {
-	struct platform_device *of_dev;
 	struct dpaa_eth_data *eth_data;
-	struct device *dpaa_dev, *dev;
-	struct device_node *mac_node;
+	struct device *dpaa_dev;
 	struct mac_device *mac_dev;
 
 	dpaa_dev = &pdev->dev;
 	eth_data = dpaa_dev->platform_data;
-	if (!eth_data)
+	if (!eth_data) {
+		dev_err(dpaa_dev, "eth_data missing\n");
 		return ERR_PTR(-ENODEV);
-
-	mac_node = eth_data->mac_node;
-
-	of_dev = of_find_device_by_node(mac_node);
-	if (!of_dev) {
-		dev_err(dpaa_dev, "of_find_device_by_node(%pOF) failed\n",
-			mac_node);
-		of_node_put(mac_node);
-		return ERR_PTR(-EINVAL);
 	}
-	of_node_put(mac_node);
-
-	dev = &of_dev->dev;
-
-	mac_dev = dev_get_drvdata(dev);
+	mac_dev = eth_data->mac_dev;
 	if (!mac_dev) {
-		dev_err(dpaa_dev, "dev_get_drvdata(%s) failed\n",
-			dev_name(dev));
+		dev_err(dpaa_dev, "mac_dev missing\n");
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -2696,7 +2681,13 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	int err = 0, i, channel;
 	struct device *dev;
 
-	dev = &pdev->dev;
+	/* device used for DMA mapping */
+	dev = pdev->dev.parent;
+	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
+	if (err) {
+		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
+		return err;
+	}
 
 	/* Allocate this early, so we can store relevant information in
 	 * the private area
@@ -2738,14 +2729,6 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	priv->buf_layout[RX].priv_data_size = DPAA_RX_PRIV_DATA_SIZE; /* Rx */
 	priv->buf_layout[TX].priv_data_size = DPAA_TX_PRIV_DATA_SIZE; /* Tx */
 
-	/* device used for DMA mapping */
-	set_dma_ops(dev, get_dma_ops(&pdev->dev));
-	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
-	if (err) {
-		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
-		goto dev_mask_failed;
-	}
-
 	/* bp init */
 	for (i = 0; i < DPAA_BPS_NUM; i++) {
 		int err;
@@ -2879,7 +2862,6 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	dpaa_bps_free(priv);
 bp_create_failed:
 fq_probe_failed:
-dev_mask_failed:
 mac_probe_failed:
 	dev_set_drvdata(dev, NULL);
 	free_netdev(net_dev);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index a0a3107..1d6da1e 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -542,8 +542,7 @@ static const u16 phy2speed[] = {
 };
 
 static struct platform_device *dpaa_eth_add_device(int fman_id,
-						   struct mac_device *mac_dev,
-						   struct device_node *node)
+						   struct mac_device *mac_dev)
 {
 	struct platform_device *pdev;
 	struct dpaa_eth_data data;
@@ -556,10 +555,8 @@ static struct platform_device *dpaa_eth_add_device(int fman_id,
 	data.mac_dev = mac_dev;
 	data.mac_hw_id = priv->cell_index;
 	data.fman_hw_id = fman_id;
-	data.mac_node = node;
 
 	mutex_lock(&eth_lock);
-
 	pdev = platform_device_alloc("dpaa-ethernet", dpaa_eth_dev_cnt);
 	if (!pdev) {
 		ret = -ENOMEM;
@@ -648,9 +645,6 @@ static int mac_probe(struct platform_device *_of_dev)
 		goto _return;
 	}
 
-	/* Register mac_dev */
-	dev_set_drvdata(dev, mac_dev);
-
 	INIT_LIST_HEAD(&priv->mc_addr_list);
 
 	/* Get the FM node */
@@ -659,7 +653,7 @@ static int mac_probe(struct platform_device *_of_dev)
 		dev_err(dev, "of_get_parent(%pOF) failed\n",
 			mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	of_dev = of_find_device_by_node(dev_node);
@@ -693,7 +687,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (err < 0) {
 		dev_err(dev, "of_address_to_resource(%pOF) = %d\n",
 			mac_node, err);
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	mac_dev->res = __devm_request_region(dev,
@@ -703,7 +697,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (!mac_dev->res) {
 		dev_err(dev, "__devm_request_mem_region(mac) failed\n");
 		err = -EBUSY;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	priv->vaddr = devm_ioremap(dev, mac_dev->res->start,
@@ -711,7 +705,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (!priv->vaddr) {
 		dev_err(dev, "devm_ioremap() failed\n");
 		err = -EIO;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	if (!of_device_is_available(mac_node)) {
@@ -728,7 +722,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (err) {
 		dev_err(dev, "failed to read cell-index for %pOF\n", mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 	priv->cell_index = (u8)val;
 
@@ -737,7 +731,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (!mac_addr) {
 		dev_err(dev, "of_get_mac_address(%pOF) failed\n", mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 	memcpy(mac_dev->addr, mac_addr, sizeof(mac_dev->addr));
 
@@ -747,14 +741,14 @@ static int mac_probe(struct platform_device *_of_dev)
 		dev_err(dev, "of_count_phandle_with_args(%pOF, fsl,fman-ports) failed\n",
 			mac_node);
 		err = nph;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	if (nph != ARRAY_SIZE(mac_dev->port)) {
 		dev_err(dev, "Not supported number of fman-ports handles of mac node %pOF from device tree\n",
 			mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
@@ -818,20 +812,20 @@ static int mac_probe(struct platform_device *_of_dev)
 
 		err = of_phy_register_fixed_link(mac_node);
 		if (err)
-			goto _return_dev_set_drvdata;
+			goto _return_of_get_parent;
 
 		priv->fixed_link = kzalloc(sizeof(*priv->fixed_link),
 					   GFP_KERNEL);
 		if (!priv->fixed_link) {
 			err = -ENOMEM;
-			goto _return_dev_set_drvdata;
+			goto _return_of_get_parent;
 		}
 
 		mac_dev->phy_node = of_node_get(mac_node);
 		phy = of_phy_find_device(mac_dev->phy_node);
 		if (!phy) {
 			err = -EINVAL;
-			goto _return_dev_set_drvdata;
+			goto _return_of_get_parent;
 		}
 
 		priv->fixed_link->link = phy->link;
@@ -847,7 +841,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (err < 0) {
 		dev_err(dev, "mac_dev->init() = %d\n", err);
 		of_node_put(mac_dev->phy_node);
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	/* pause frame autonegotiation enabled */
@@ -868,7 +862,7 @@ static int mac_probe(struct platform_device *_of_dev)
 		 mac_dev->addr[0], mac_dev->addr[1], mac_dev->addr[2],
 		 mac_dev->addr[3], mac_dev->addr[4], mac_dev->addr[5]);
 
-	priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev, mac_node);
+	priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev);
 	if (IS_ERR(priv->eth_dev)) {
 		dev_err(dev, "failed to add Ethernet platform device for MAC %d\n",
 			priv->cell_index);
@@ -879,9 +873,8 @@ static int mac_probe(struct platform_device *_of_dev)
 
 _return_of_node_put:
 	of_node_put(dev_node);
-_return_dev_set_drvdata:
+_return_of_get_parent:
 	kfree(priv->fixed_link);
-	dev_set_drvdata(dev, NULL);
 _return:
 	return err;
 }
diff --git a/drivers/net/ethernet/freescale/fman/mac.h b/drivers/net/ethernet/freescale/fman/mac.h
index 1ca85a1..eefb335 100644
--- a/drivers/net/ethernet/freescale/fman/mac.h
+++ b/drivers/net/ethernet/freescale/fman/mac.h
@@ -83,7 +83,6 @@ struct mac_device {
 };
 
 struct dpaa_eth_data {
-	struct device_node *mac_node;
 	struct mac_device *mac_dev;
 	int mac_hw_id;
 	int fman_hw_id;
-- 
2.1.0

[PATCH v3 4/6] dpaa_eth: cleanup dpaa_eth_probe() error paths

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 53 ++++++++++----------------
 1 file changed, 20 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 823aa65..c6b97a1 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2695,7 +2695,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA_ETH_TXQ_NUM);
 	if (!net_dev) {
 		dev_err(dev, "alloc_etherdev_mq() failed\n");
-		goto alloc_etherdev_mq_failed;
+		return -ENOMEM;
 	}
 
 	/* Do this here, so we can be verbose early */
@@ -2711,7 +2711,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	if (IS_ERR(mac_dev)) {
 		dev_err(dev, "dpaa_mac_dev_get() failed\n");
 		err = PTR_ERR(mac_dev);
-		goto mac_probe_failed;
+		goto free_netdev;
 	}
 
 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
@@ -2735,7 +2735,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 
 		dpaa_bps[i] = dpaa_bp_alloc(dev);
 		if (IS_ERR(dpaa_bps[i]))
-			return PTR_ERR(dpaa_bps[i]);
+			goto free_dpaa_bps;
 		/* the raw size of the buffers used for reception */
 		dpaa_bps[i]->raw_size = bpool_buffer_raw_size(i, DPAA_BPS_NUM);
 		/* avoid runtime computations by keeping the usable size here */
@@ -2743,11 +2743,8 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 		dpaa_bps[i]->dev = dev;
 
 		err = dpaa_bp_alloc_pool(dpaa_bps[i]);
-		if (err < 0) {
-			dpaa_bps_free(priv);
-			priv->dpaa_bps[i] = NULL;
-			goto bp_create_failed;
-		}
+		if (err < 0)
+			goto free_dpaa_bps;
 		priv->dpaa_bps[i] = dpaa_bps[i];
 	}
 
@@ -2758,7 +2755,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	err = dpaa_alloc_all_fqs(dev, &priv->dpaa_fq_list, &port_fqs);
 	if (err < 0) {
 		dev_err(dev, "dpaa_alloc_all_fqs() failed\n");
-		goto fq_probe_failed;
+		goto free_dpaa_bps;
 	}
 
 	priv->mac_dev = mac_dev;
@@ -2767,7 +2764,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	if (channel < 0) {
 		dev_err(dev, "dpaa_get_channel() failed\n");
 		err = channel;
-		goto get_channel_failed;
+		goto free_dpaa_bps;
 	}
 
 	priv->channel = (u16)channel;
@@ -2787,20 +2784,20 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	err = dpaa_eth_cgr_init(priv);
 	if (err < 0) {
 		dev_err(dev, "Error initializing CGR\n");
-		goto tx_cgr_init_failed;
+		goto free_dpaa_bps;
 	}
 
 	err = dpaa_ingress_cgr_init(priv);
 	if (err < 0) {
 		dev_err(dev, "Error initializing ingress CGR\n");
-		goto rx_cgr_init_failed;
+		goto delete_egress_cgr;
 	}
 
 	/* Add the FQs to the interface, and make them active */
 	list_for_each_entry_safe(dpaa_fq, tmp, &priv->dpaa_fq_list, list) {
 		err = dpaa_fq_init(dpaa_fq, false);
 		if (err < 0)
-			goto fq_alloc_failed;
+			goto free_dpaa_fqs;
 	}
 
 	priv->tx_headroom = dpaa_get_headroom(&priv->buf_layout[TX]);
@@ -2810,7 +2807,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	err = dpaa_eth_init_ports(mac_dev, dpaa_bps, DPAA_BPS_NUM, &port_fqs,
 				  &priv->buf_layout[0], dev);
 	if (err)
-		goto init_ports_failed;
+		goto free_dpaa_fqs;
 
 	/* Rx traffic distribution based on keygen hashing defaults to on */
 	priv->keygen_in_use = true;
@@ -2819,7 +2816,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	if (!priv->percpu_priv) {
 		dev_err(dev, "devm_alloc_percpu() failed\n");
 		err = -ENOMEM;
-		goto alloc_percpu_failed;
+		goto free_dpaa_fqs;
 	}
 	for_each_possible_cpu(i) {
 		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
@@ -2832,11 +2829,11 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	/* Initialize NAPI */
 	err = dpaa_napi_add(net_dev);
 	if (err < 0)
-		goto napi_add_failed;
+		goto delete_dpaa_napi;
 
 	err = dpaa_netdev_init(net_dev, &dpaa_ops, tx_timeout);
 	if (err < 0)
-		goto netdev_init_failed;
+		goto delete_dpaa_napi;
 
 	dpaa_eth_sysfs_init(&net_dev->dev);
 
@@ -2845,31 +2842,21 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 
 	return 0;
 
-netdev_init_failed:
-napi_add_failed:
+delete_dpaa_napi:
 	dpaa_napi_del(net_dev);
-alloc_percpu_failed:
-init_ports_failed:
+free_dpaa_fqs:
 	dpaa_fq_free(dev, &priv->dpaa_fq_list);
-fq_alloc_failed:
 	qman_delete_cgr_safe(&priv->ingress_cgr);
 	qman_release_cgrid(priv->ingress_cgr.cgrid);
-rx_cgr_init_failed:
+delete_egress_cgr:
 	qman_delete_cgr_safe(&priv->cgr_data.cgr);
 	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
-tx_cgr_init_failed:
-get_channel_failed:
+free_dpaa_bps:
 	dpaa_bps_free(priv);
-bp_create_failed:
-fq_probe_failed:
-mac_probe_failed:
+free_netdev:
 	dev_set_drvdata(dev, NULL);
 	free_netdev(net_dev);
-alloc_etherdev_mq_failed:
-	for (i = 0; i < DPAA_BPS_NUM && dpaa_bps[i]; i++) {
-		if (atomic_read(&dpaa_bps[i]->refs) == 0)
-			devm_kfree(dev, dpaa_bps[i]);
-	}
+
 	return err;
 }
 
-- 
2.1.0

[PATCH v3 5/6] fsl/fman: add dpaa in module names

[Madalin Bucur]

This change just renames the FMan driver modules, using a common prefix
for the DPAA FMan and DPAA Ethernet drivers. Besides making the names more
aligned, this allows writing udev rules that match on either driver name,
if needed, using the fsl_dpaa_* prefix. The change of netdev dev required
for the DSA probing makes the previous rules written using this prefix
fail, this change makes them work again, ensuring backwards compatibility
for their users.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/fman/Makefile | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/Makefile b/drivers/net/ethernet/freescale/fman/Makefile
index 2c38119..4ae524a 100644
--- a/drivers/net/ethernet/freescale/fman/Makefile
+++ b/drivers/net/ethernet/freescale/fman/Makefile
@@ -1,9 +1,9 @@
 subdir-ccflags-y +=  -I$(srctree)/drivers/net/ethernet/freescale/fman
 
-obj-$(CONFIG_FSL_FMAN) += fsl_fman.o
-obj-$(CONFIG_FSL_FMAN) += fsl_fman_port.o
-obj-$(CONFIG_FSL_FMAN) += fsl_mac.o
+obj-$(CONFIG_FSL_FMAN) += fsl_dpaa_fman.o
+obj-$(CONFIG_FSL_FMAN) += fsl_dpaa_fman_port.o
+obj-$(CONFIG_FSL_FMAN) += fsl_dpaa_mac.o
 
-fsl_fman-objs	:= fman_muram.o fman.o fman_sp.o fman_keygen.o
-fsl_fman_port-objs := fman_port.o
-fsl_mac-objs:= mac.o fman_dtsec.o fman_memac.o fman_tgec.o
+fsl_dpaa_fman-objs	:= fman_muram.o fman.o fman_sp.o fman_keygen.o
+fsl_dpaa_fman_port-objs := fman_port.o
+fsl_dpaa_mac-objs:= mac.o fman_dtsec.o fman_memac.o fman_tgec.o
-- 
2.1.0

[PATCH v3 6/6] dpaa_eth: remove obsolete comment

[Madalin Bucur]

Comment is no longer valid for a long time now.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index c6b97a1..a8d0be8 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2449,10 +2449,6 @@ static int dpaa_phy_init(struct net_device *net_dev)
 
 	/* Remove any features not supported by the controller */
 	phy_dev->supported &= mac_dev->if_support;
-
-	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-	 * as most of the PHY drivers do not enable them by default.
-	 */
 	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
 	phy_dev->advertising = phy_dev->supported;
 
-- 
2.1.0

Re: [PATCH v3 0/6] adapt DPAA drivers for DSA

[David Miller]

From: Madalin Bucur <madalin.bucur@nxp.com>
Date: Mon, 16 Oct 2017 21:36:04 +0300

> Junote Cai reported that he was not able to get a DSA setup involving the
> DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node()
> call in DSA setup. The initial attempt to fix this by adding of_node to the
> platform device results in a second, failed, probing of the FMan MAC driver
> against the new platform device created for the DPAA Ethernet driver.
> Solve these issues by removing the of_node pointer from the platform device
> and changing the net_dev dev to the of_device dev to ensure the DSA init
> will be able to find the DPAA net_dev using of_find_net_device_by_node().
> Several changes were required to enable this solution: refactoring the
> adjust_link (also resulted in lesser, cleaner code) and renaming the fman
> kernel modules to keep the legacy udev rules happy.
> 
> Changes in v2:
> 
>  - fix issue on error path in "dpaa_eth: change device used" patch
>  - cleanup the dpaa_eth_probe() error paths
> 
> Changes in v3:
> 
>  - remove obsolete comment in moved code
>  - add explanation for module rename

Series applied.