netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Jérémy Lefaure" <jeremy.lefaure@lse.epita.fr>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, "Jérémy Lefaure" <jeremy.lefaure@lse.epita.fr>
Subject: [PATCH v2] net: use ARRAY_SIZE
Date: Mon, 13 Nov 2017 22:24:54 -0500	[thread overview]
Message-ID: <20171114032454.23052-1-jeremy.lefaure@lse.epita.fr> (raw)
In-Reply-To: <20171001193101.8898-6-jeremy.lefaure@lse.epita.fr>

Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is not always useful to use a variable to store this constant
calculated at compile time.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
---
Changes in v2:
This patch was part of bigger patch (wrongly sent in a series, sorry).
The previous patch has been split to all changes in drivers/net/wireless
are in a separate patch sent to Kalle Valo.

 drivers/net/ethernet/emulex/benet/be_cmds.c     |  4 ++--
 drivers/net/ethernet/intel/i40e/i40e_adminq.h   |  3 ++-
 drivers/net/ethernet/intel/i40evf/i40e_adminq.h |  3 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c   |  3 ++-
 drivers/net/ethernet/intel/ixgbevf/vf.c         | 17 ++++++++---------
 drivers/net/usb/kalmia.c                        |  9 +++++----
 include/net/bond_3ad.h                          |  3 ++-
 net/ipv6/seg6_local.c                           |  6 +++---
 8 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 02dd5246dfae..ec39363afd5f 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -15,6 +15,7 @@
  * Costa Mesa, CA 92626
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include "be.h"
 #include "be_cmds.h"
@@ -103,10 +104,9 @@ static struct be_cmd_priv_map cmd_priv_map[] = {
 static bool be_cmd_allowed(struct be_adapter *adapter, u8 opcode, u8 subsystem)
 {
 	int i;
-	int num_entries = sizeof(cmd_priv_map)/sizeof(struct be_cmd_priv_map);
 	u32 cmd_privileges = adapter->cmd_privileges;
 
-	for (i = 0; i < num_entries; i++)
+	for (i = 0; i < ARRAY_SIZE(cmd_priv_map); i++)
 		if (opcode == cmd_priv_map[i].opcode &&
 		    subsystem == cmd_priv_map[i].subsystem)
 			if (!(cmd_privileges & cmd_priv_map[i].priv_mask))
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.h b/drivers/net/ethernet/intel/i40e/i40e_adminq.h
index 2349fbe04bd2..892083b65b91 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.h
@@ -27,6 +27,7 @@
 #ifndef _I40E_ADMINQ_H_
 #define _I40E_ADMINQ_H_
 
+#include <linux/kernel.h>
 #include "i40e_osdep.h"
 #include "i40e_status.h"
 #include "i40e_adminq_cmd.h"
@@ -143,7 +144,7 @@ static inline int i40e_aq_rc_to_posix(int aq_ret, int aq_rc)
 	if (aq_ret == I40E_ERR_ADMIN_QUEUE_TIMEOUT)
 		return -EAGAIN;
 
-	if (!((u32)aq_rc < (sizeof(aq_to_posix) / sizeof((aq_to_posix)[0]))))
+	if (!((u32)aq_rc < ARRAY_SIZE(aq_to_posix)))
 		return -ERANGE;
 
 	return aq_to_posix[aq_rc];
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq.h
index e0bfaa3d4a21..5622a24cc74d 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq.h
@@ -27,6 +27,7 @@
 #ifndef _I40E_ADMINQ_H_
 #define _I40E_ADMINQ_H_
 
+#include <linux/kernel.h>
 #include "i40e_osdep.h"
 #include "i40e_status.h"
 #include "i40e_adminq_cmd.h"
@@ -143,7 +144,7 @@ static inline int i40e_aq_rc_to_posix(int aq_ret, int aq_rc)
 	if (aq_ret == I40E_ERR_ADMIN_QUEUE_TIMEOUT)
 		return -EAGAIN;
 
-	if (!((u32)aq_rc < (sizeof(aq_to_posix) / sizeof((aq_to_posix)[0]))))
+	if (!((u32)aq_rc < ARRAY_SIZE(aq_to_posix)))
 		return -ERANGE;
 
 	return aq_to_posix[aq_rc];
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index cb7da5f9c4da..0b804790256e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -21,6 +21,7 @@
  *  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *
  ******************************************************************************/
+#include <linux/kernel.h>
 #include "ixgbe_x540.h"
 #include "ixgbe_type.h"
 #include "ixgbe_common.h"
@@ -949,7 +950,7 @@ static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
 	u16 length, bufsz, i, start;
 	u16 *local_buffer;
 
-	bufsz = sizeof(buf) / sizeof(buf[0]);
+	bufsz = ARRAY_SIZE(buf);
 
 	/* Read a chunk at the pointer location */
 	if (!buffer) {
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
index 0c25006ce9af..96bfef92fb4c 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.c
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.c
@@ -24,6 +24,7 @@
 
 *******************************************************************************/
 
+#include <linux/kernel.h>
 #include "vf.h"
 #include "ixgbevf.h"
 
@@ -285,7 +286,7 @@ static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
 		ether_addr_copy(msg_addr, addr);
 
 	ret_val = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf,
-					     sizeof(msgbuf) / sizeof(u32));
+					     ARRAY_SIZE(msgbuf));
 	if (!ret_val) {
 		msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
 
@@ -455,7 +456,7 @@ static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
 	ether_addr_copy(msg_addr, addr);
 
 	ret_val = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf,
-					     sizeof(msgbuf) / sizeof(u32));
+					     ARRAY_SIZE(msgbuf));
 
 	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
 
@@ -571,7 +572,7 @@ static s32 ixgbevf_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode)
 	msgbuf[1] = xcast_mode;
 
 	err = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf,
-					 sizeof(msgbuf) / sizeof(u32));
+					 ARRAY_SIZE(msgbuf));
 	if (err)
 		return err;
 
@@ -609,7 +610,7 @@ static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 	msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
 
 	err = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf,
-					 sizeof(msgbuf) / sizeof(u32));
+					 ARRAY_SIZE(msgbuf));
 	if (err)
 		goto mbx_err;
 
@@ -813,7 +814,7 @@ static s32 ixgbevf_set_rlpml_vf(struct ixgbe_hw *hw, u16 max_size)
 	msgbuf[1] = max_size;
 
 	ret_val = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf,
-					     sizeof(msgbuf) / sizeof(u32));
+					     ARRAY_SIZE(msgbuf));
 	if (ret_val)
 		return ret_val;
 	if ((msgbuf[0] & IXGBE_VF_SET_LPE) &&
@@ -859,8 +860,7 @@ static int ixgbevf_negotiate_api_version_vf(struct ixgbe_hw *hw, int api)
 	msg[1] = api;
 	msg[2] = 0;
 
-	err = ixgbevf_write_msg_read_ack(hw, msg, msg,
-					 sizeof(msg) / sizeof(u32));
+	err = ixgbevf_write_msg_read_ack(hw, msg, msg, ARRAY_SIZE(msg));
 	if (!err) {
 		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
 
@@ -911,8 +911,7 @@ int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
 	msg[0] = IXGBE_VF_GET_QUEUE;
 	msg[1] = msg[2] = msg[3] = msg[4] = 0;
 
-	err = ixgbevf_write_msg_read_ack(hw, msg, msg,
-					 sizeof(msg) / sizeof(u32));
+	err = ixgbevf_write_msg_read_ack(hw, msg, msg, ARRAY_SIZE(msg));
 	if (!err) {
 		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
 
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index ce0b0b4e3a57..6976003d64db 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -26,6 +26,7 @@
 #include <linux/usb/cdc.h>
 #include <linux/usb/usbnet.h>
 #include <linux/gfp.h>
+#include <linux/kernel.h>
 
 /*
  * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
@@ -114,14 +115,14 @@ kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
 		return -ENOMEM;
 
 	memcpy(usb_buf, init_msg_1, 12);
-	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
-		/ sizeof(init_msg_1[0]), usb_buf, 24);
+	status = kalmia_send_init_packet(dev, usb_buf, ARRAY_SIZE(init_msg_1),
+					 usb_buf, 24);
 	if (status != 0)
 		return status;
 
 	memcpy(usb_buf, init_msg_2, 12);
-	status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
-		/ sizeof(init_msg_2[0]), usb_buf, 28);
+	status = kalmia_send_init_packet(dev, usb_buf, ARRAY_SIZE(init_msg_2),
+					 usb_buf, 28);
 	if (status != 0)
 		return status;
 
diff --git a/include/net/bond_3ad.h b/include/net/bond_3ad.h
index f358ad5e4214..7a06fa295814 100644
--- a/include/net/bond_3ad.h
+++ b/include/net/bond_3ad.h
@@ -27,6 +27,7 @@
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/if_ether.h>
+#include <linux/kernel.h>
 
 /* General definitions */
 #define PKT_TYPE_LACPDU         cpu_to_be16(ETH_P_SLOW)
@@ -283,7 +284,7 @@ static inline const char *bond_3ad_churn_desc(churn_state_t state)
 		"none",
 		"unknown"
 	};
-	int max_size = sizeof(churn_description) / sizeof(churn_description[0]);
+	int max_size = ARRAY_SIZE(churn_description);
 
 	if (state >= max_size)
 		state = max_size - 1;
diff --git a/net/ipv6/seg6_local.c b/net/ipv6/seg6_local.c
index 825b8e01f947..9e4e1dc89e29 100644
--- a/net/ipv6/seg6_local.c
+++ b/net/ipv6/seg6_local.c
@@ -31,6 +31,7 @@
 #include <net/seg6_hmac.h>
 #endif
 #include <linux/etherdevice.h>
+#include <linux/kernel.h>
 
 struct seg6_local_lwt;
 
@@ -499,10 +500,9 @@ static struct seg6_action_desc seg6_action_table[] = {
 static struct seg6_action_desc *__get_action_desc(int action)
 {
 	struct seg6_action_desc *desc;
-	int i, count;
+	int i;
 
-	count = sizeof(seg6_action_table) / sizeof(struct seg6_action_desc);
-	for (i = 0; i < count; i++) {
+	for (i = 0; i < ARRAY_SIZE(seg6_action_table); i++) {
 		desc = &seg6_action_table[i];
 		if (desc->action == action)
 			return desc;
-- 
2.15.0

  parent reply	other threads:[~2017-11-14  3:35 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-01 19:30 [PATCH 00/18] use ARRAY_SIZE macro Jérémy Lefaure
2017-10-01 19:30 ` [PATCH 05/18] net: use ARRAY_SIZE Jérémy Lefaure
2017-10-02 13:07   ` Andy Shevchenko
     [not found]     ` <CAHp75VfC2e+h8GCiB-1Rbe=_z3siBBo0WfqEf3qz8yWh8Cm3RQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-10-03  1:22       ` Jérémy Lefaure
2017-10-03  8:09         ` Andy Shevchenko
2017-10-02 13:46   ` Kalle Valo
2017-10-03  1:23     ` Jérémy Lefaure
2017-11-14  3:24   ` Jérémy Lefaure [this message]
2017-10-01 22:01 ` [PATCH 00/18] use ARRAY_SIZE macro Tobin C. Harding
2017-10-02  0:52   ` Jérémy Lefaure
2017-10-02  5:35     ` Greg KH
2017-10-02 19:22       ` J. Bruce Fields
2017-10-03  1:33         ` Jérémy Lefaure
2017-10-05 17:57           ` J. Bruce Fields
2017-10-02 16:37     ` Mauro Carvalho Chehab
2017-10-02 17:05 ` Zhi Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171114032454.23052-1-jeremy.lefaure@lse.epita.fr \
    --to=jeremy.lefaure@lse.epita.fr \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).