Re: [PATCH 3/4] RFC: net: dsa: Add bindings for Realtek SMI DSAs

[Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>]

> So why not:
> 
> switch@0 {
>         compatible = "acme,switch";
>         #address-cells = <1>;
>         #size-cells = <0>;
> 
>         ports {
> 
>                 port@0 {
>                         reg = <0>;
>                         phy@0 {
>                              reg = <0>;
>                         };
>                 };

Hi Linus

So you are suggesting put the PHY node inside the MAC node.

This is sometimes done, but does not describe the hardware. The PHYs
are on an MDIO bus, so device tree should show the MDIO bus and the
PHYs on it.

DSA does have an MDIO bus, so putting the PHYs in the MAC is just
confusing. Although that is not Florians preferred solution, he would
like the DSA driver to export its own MDIO bus and list the PHYs on
it.

	Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html