* ethtool-copy.h out of sync with linux header file?
@ 2017-12-04 20:07 Scott Branden
2017-12-04 21:00 ` Greenwalt, Paul
0 siblings, 1 reply; 4+ messages in thread
From: Scott Branden @ 2017-12-04 20:07 UTC (permalink / raw)
To: linville, paul.greenwalt; +Cc: netdev
Hi Paul/John,
I see a commit "ethtool: Add DMA Coalescing support" was added to
ethtool-copy.h yet I cannot find the change in the ethtool.h in the
linux kernel.
As such, I am unable to commit a change to ethtool-copy.h to sync it
with net-next. If I sync then ethtool will fail to compile.
Please advise.
Thanks,
Scott
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: ethtool-copy.h out of sync with linux header file?
2017-12-04 20:07 ethtool-copy.h out of sync with linux header file? Scott Branden
@ 2017-12-04 21:00 ` Greenwalt, Paul
2017-12-05 20:25 ` Scott Branden
0 siblings, 1 reply; 4+ messages in thread
From: Greenwalt, Paul @ 2017-12-04 21:00 UTC (permalink / raw)
To: Scott Branden, linville@tuxdriver.com; +Cc: netdev
John,
Can this patch be reverted? As Stephen Hemminger mentioned
there is an ABI compatibility issue with this patch:
https://patchwork.ozlabs.org/patch/806049/#1757846
Thanks,
Paul
> -----Original Message-----
> From: Scott Branden [mailto:scott.branden@broadcom.com]
> Sent: Monday, December 4, 2017 12:07 PM
> To: linville@tuxdriver.com; Greenwalt, Paul <paul.greenwalt@intel.com>
> Cc: netdev <netdev@vger.kernel.org>
> Subject: ethtool-copy.h out of sync with linux header file?
>
> Hi Paul/John,
>
> I see a commit "ethtool: Add DMA Coalescing support" was added to
> ethtool-copy.h yet I cannot find the change in the ethtool.h in the
> linux kernel.
>
> As such, I am unable to commit a change to ethtool-copy.h to sync it
> with net-next. If I sync then ethtool will fail to compile.
>
> Please advise.
>
> Thanks,
>
> Scott
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ethtool-copy.h out of sync with linux header file?
2017-12-04 21:00 ` Greenwalt, Paul
@ 2017-12-05 20:25 ` Scott Branden
2017-12-06 14:19 ` John W. Linville
0 siblings, 1 reply; 4+ messages in thread
From: Scott Branden @ 2017-12-05 20:25 UTC (permalink / raw)
To: Greenwalt, Paul, linville@tuxdriver.com; +Cc: netdev
Hi Paul,
On 17-12-04 01:00 PM, Greenwalt, Paul wrote:
> John,
>
> Can this patch be reverted? As Stephen Hemminger mentioned
> there is an ABI compatibility issue with this patch:
I can add the revert into a patch series followed by the sync of
ethtool-copy.h with net-netx ethtool.h
>
> https://patchwork.ozlabs.org/patch/806049/#1757846
>
> Thanks,
> Paul
>
>> -----Original Message-----
>> From: Scott Branden [mailto:scott.branden@broadcom.com]
>> Sent: Monday, December 4, 2017 12:07 PM
>> To: linville@tuxdriver.com; Greenwalt, Paul <paul.greenwalt@intel.com>
>> Cc: netdev <netdev@vger.kernel.org>
>> Subject: ethtool-copy.h out of sync with linux header file?
>>
>> Hi Paul/John,
>>
>> I see a commit "ethtool: Add DMA Coalescing support" was added to
>> ethtool-copy.h yet I cannot find the change in the ethtool.h in the
>> linux kernel.
>>
>> As such, I am unable to commit a change to ethtool-copy.h to sync it
>> with net-next. If I sync then ethtool will fail to compile.
>>
>> Please advise.
>>
>> Thanks,
>>
>> Scott
>>
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ethtool-copy.h out of sync with linux header file?
2017-12-05 20:25 ` Scott Branden
@ 2017-12-06 14:19 ` John W. Linville
0 siblings, 0 replies; 4+ messages in thread
From: John W. Linville @ 2017-12-06 14:19 UTC (permalink / raw)
To: Scott Branden; +Cc: Greenwalt, Paul, netdev
On Tue, Dec 05, 2017 at 12:25:51PM -0800, Scott Branden wrote:
> Hi Paul,
>
>
> On 17-12-04 01:00 PM, Greenwalt, Paul wrote:
> > John,
> >
> > Can this patch be reverted? As Stephen Hemminger mentioned
> > there is an ABI compatibility issue with this patch:
> I can add the revert into a patch series followed by the sync of
> ethtool-copy.h with net-netx ethtool.h
Yes, exactly. I see that you did just that in your later series
submission.
Thanks!
John
> >
> > https://patchwork.ozlabs.org/patch/806049/#1757846
> >
> > Thanks,
> > Paul
> >
> > > -----Original Message-----
> > > From: Scott Branden [mailto:scott.branden@broadcom.com]
> > > Sent: Monday, December 4, 2017 12:07 PM
> > > To: linville@tuxdriver.com; Greenwalt, Paul <paul.greenwalt@intel.com>
> > > Cc: netdev <netdev@vger.kernel.org>
> > > Subject: ethtool-copy.h out of sync with linux header file?
> > >
> > > Hi Paul/John,
> > >
> > > I see a commit "ethtool: Add DMA Coalescing support" was added to
> > > ethtool-copy.h yet I cannot find the change in the ethtool.h in the
> > > linux kernel.
> > >
> > > As such, I am unable to commit a change to ethtool-copy.h to sync it
> > > with net-next. If I sync then ethtool will fail to compile.
> > >
> > > Please advise.
> > >
> > > Thanks,
> > >
> > > Scott
> > >
> > >
>
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-12-06 14:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-04 20:07 ethtool-copy.h out of sync with linux header file? Scott Branden
2017-12-04 21:00 ` Greenwalt, Paul
2017-12-05 20:25 ` Scott Branden
2017-12-06 14:19 ` John W. Linville
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).